You are reading the article Where Is The Startup Folder In Windows 11/10 For All Users updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Where Is The Startup Folder In Windows 11/10 For All Users
The Startup folder contains a list of application shortcuts that run automatically every time you start up your computer. You can add programs by adding their shortcuts to the folder to make them run during your Windows 11 or Windows 10 startup. You can also remove any of them if you don’t want them to run during startup.
Location of Startup Folder for All usersHere’s how to go to the all-users’ startup folder in Windows 10 or Windows 11:
Open File Explorer from the start menu.
Browse to the following directory. C:ProgramDataMicrosoftWindowsStart MenuProgramsStartUp
Please take note that the above directory is assuming your default Windows was installed in C: drive. If your Windows is in another drive, change the drive letter.
Add or remove any program’s shortcut into or from the folder.
Another much faster way to go to the startup folder in Windows 11/10:
Go to start menu and type Run. Hit enter.
In the Open field, type shell:common startup and then hit enter.
Startup Folder for Current User OnlyIf you would like to configure startup for only the currently logged-in user, here’s where you should go:
Open File Explorer.
Browse to the following folder. C:UsersUsernameAppDataRoamingMicrosoftWindowsStart MenuProgramsStartup
Replace the Username with the actual username you’re currently using in your Windows system.
Add or remove any shortcut as you want.
Another quicker method to go to this folder:
Go to start menu and type Run. Press enter.
Type shell:startup in the open field and press enter.
Configure Windows 11/10 Startup Apps from MsconfigNot all application EXE shortcuts would be shown in the startup folder mentioned above. Some would not be there but would still run during startup. To have a clearer view of all the background programs and services that would run during the startup of your Windows 10 computer, use Msconfig. Here’s how:
Go to Start, then Run.
Type msconfig and hit enter.
In the System Configuration window, go to the Startup tab.
Programs shown in the startup list are all the programs that would run during startup.
Additional Tips for Optimizing Startup ProgramsWhile the methods above are effective for managing startup programs in Windows 10/11, there are also other ways to further optimize your startup and improve your system’s performance. Here are a few additional tips:
Disable unnecessary startup programs: Take a closer look at the programs that are set to run at startup and disable any that you don’t need. Some programs, such as antivirus software or cloud storage services, are important to have running at startup. However, others may not be necessary and can be disabled to free up resources and speed up your system’s boot time.
Clean up your system: Regularly cleaning up your system can help improve startup times and overall system performance. Use a disk cleanup tool to delete unnecessary files, clear out temporary files, and remove unused programs. This can help free up resources and reduce the number of programs that need to run at startup.
Upgrade your hardware: If you’re still experiencing slow startup times even after optimizing your startup programs and cleaning up your system, it may be time to upgrade your hardware. Adding more RAM or switching to a faster hard drive or solid-state drive can significantly improve your system’s performance and reduce startup times.
By following these tips and using the methods outlined above, you can effectively manage your startup programs in Windows 10/11 and optimize your system for better performance.
You're reading Where Is The Startup Folder In Windows 11/10 For All Users
Fix: Startup Folder Not Working In Windows 10/11
FIX: Startup folder not working in Windows 10/11
868
Share
X
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
The most common problem with startup programs is that they tend to bloat your system and slow down the startup process.
The dozens of programs in combination with an old HDD mean that you’ll wait for some time until the PC finally boots.
However, there’s also the opposite of it – when programs in Windows Startup folder just won’t start no matter what you do.
For the sake of dealing with this annoyance, we prepared an in-depth list that should provide you with enough resources to address this problem.
In case you’re trying to make a program start with the system without success, make sure to take a look below.
What can I do when programs from Startup folder won’t start? 1: Check the Startup managerBack in the days, you had to turn to System Configuration in order to tweak the startup programs. There were all Windows services, too, so there are a lot of things you couldn’t touch.
A tad overcomplicated for a standard user. Others turned to third-party tools that were more of a bloatware than the solution. Luckily, that’s not the case with Windows 10.
Now, you can navigate to good old Task Manager and find all startup programs you need.
You can enable or disable any of them based on your needs.
If you’re not sure how to use newly added Startup manager in Windows 10, follow the instructions below:
Press Ctrl + Shift + Esc to open Task Manager.
Open the Startup tab.
Select the programs you want to start with the system and enable them.
Confirm changes and restart your PC.
2: Reinstall the programAfter every installation, the program or application should automatically create a shortcut in the system’s startup folder.
However, sometimes and for no apparent reason, the installation sequence simply skips on doing so.
Even though the way of manipulating startup programs changed, the containing folder is still there with Windows 10. And it still needs those shortcuts to run as intended.
You might also be interested in our guide on how to reinstall Windows Store apps in Windows 10
What you should do in this scenario is to try to repair the installation or reinstall the program.
Most programs offer the Repair option, but even the reinstallation shouldn’t take too much of your time, with only the largest ones being an exception.
In the Windows Search bar, type Control and open Control Panel.
In the Category View, open Uninstall a program.
Navigate to Program files or Program files (86) and delete the remainings in folders.
Also, you can use a third-party cleaner like CCleaner to delete the remaining traces stored in the registry.
Run the installer and install the program again.
3: Run DISMMost of the steps we provided in this article relate to third-party programs. However, if some of the Windows-native applications won’t run at the startup, there’s an alternative way to address this.
We’re referring to DISM or Deployment Image Servicing and Management tool.
This tool can come in handy for various system-related issues, and since you’re unable to reinstall the, let’s say Task Manager, you can at least restart it with the little help of DISM.
If you’re not confident running this tool, we made sure to present you two ways it can be used in Windows 10. Follow the instructions below:
In the command line, type the following line and press Enter:
DISM /online /Cleanup-Image / ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
Wait for the procedure to finish (it might take up to 10 minutes) and restart your PC.
And here’s the alternative way to run DISM:
Mount your Windows 10 installation media, either USB or ISO DVD.
Open Command Prompt (already explained how to above).
In the command line, type the following commands and press Enter after each:
DISM /online /Cleanup-Image /CheckHealth
If there’s not any single error, enter this command and press Enter:
DISM /online /Cleanup-Image / ScanHealth
If DISM finds any errors, enter the following commands and tap Enter:
DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSourceinstall.wim
Have in mind that you’ll need to replace the ”repair source” part with your installation media.
Wait for the procedure to end and restart your PC.
Although this is should help you with the majority of issues, it may not be the final solution for your issue. If that’s the case, make sure to continue with the steps we provided below.
4: Insert the shortcut manuallyNow, the fact that you can’t locate the Startup folder in the Start menu like before, doesn’t mean that you can’t find it at all. It’s still there in Windows 10, hidden from the prying eyes.
Expert tip:
However, since that’s not always the case, you’ll need to take the matters into your own hands and create the shortcut on your own.
This shouldn’t be too much of a problem if you follow these instructions closely:
Navigate to the installation folder of the troublesome program.
Press Windows + R to open the elevated Run command line.
In the command line type to open the Startup folder:
shell:startup
Copy the shortcut and paste it into the Startup folder.
Restart your PC and look for changes.
5: Create a batch fileAnother possible solution also requires a manual approach. Namely, you can create a batch file and force a program to start with the system.
You’ll still be prompted with UAC message informing you about the program at every startup, nonetheless. But, đ at least you’ll be able to make it work.
Here’s how to create and run the batch file that enables you to run any program at the startup:
In the document, paste the following lines but don’t forget to change the example with the path to the program’s exe file.
@echo off
C:Program FilesDAEMON Tools LiteDTLauncher.exe
exit
After the system starts next time, the program should start. Although, you’ll be prompted with UAC message.
6: Force the elevated program with Task SchedulerThe Task Scheduler is a built-in tool that enables you to create, schedule and run various tasks with the implementation of triggers and criteria you set.
This, obviously, means that you can set an EXE file to run with the system startup, setting At Startup as criteria or trigger.
If you never had a chance to use Task Scheduler to force a program to start with the system, make sure to follow these steps and we should be good to go:
In the Windows Search bar, type taskschd and open Task Scheduler.
Under the General tab, name the Task same as the program you’ll try to run. In this case, we’ve chosen DeamonTools for a showcase.
Check the Run with highest privileges box.
Select Windows 10 from the ”Configure for” drop-down menu and open the Actions tab.
From the Action drop-down menu, select Start a program.
In the Program/script field, paste the following command:
%windir%System32cmd.exe
In the ”Add arguments (optional)” section, add the Task name and the path to the program’s EXE file (installation folder) in this manner:
/c start Task Name Full Path of Program
Don’t forget to replace the Task name and Full path to program’s EXE file above.
Now, finally press OK to confirm changes and you should be able to see the newly-created task.
Now press Windows + R to open the elevated Run command line.
In the command line type to open the Startup folder:
shell:startup
Copy the program’s shortcut and paste it into the Startup folder.
schtasks /run /tn “Task Name”
Don’t forget to change the task name with the name of your actual task we just created. In our case, DeamonTools.
On the next screen, name the shortcut as the program is named. In our case DeamonTools Lite.
7: Disable UACUser Account Control or UAC is one of those security measures that are certainly helpful to some extent but can become bothersome over time.
Especially if a certain program requires administrative permissions in order to run. By default, UAC will block these kinds of programs on startup, so the only thing that comes to our mind is to disable it completely.
I’ve always turned it Off on Windows 7 for various reasons, but it seems that the drawbacks are higher when it comes to Windows 10.
If you’re not sure how to disable User Account Control in Windows 10, follow the instructions below:
Type UAC in the Search bar and open Change User Account Control settings.
Move the slider to the bottom and confirm changes.
This should stop further prompts and enable you to start some of the troubled programs.
8: Edit registryMostly everything that you do within the Windows interface can be taken to a higher authority, which is Registry.
As you probably know, Windows Registry keeps all low-level settings of both system and third-party processes that appear in everyday use.
That makes it quite dangerous, so make sure not to meddle with registry inputs if you’re not 100% sure what you’re doing.
Nonetheless, with a careful approach, you should be able to easily force certain programs into starting with the system from the Registry Editor.
Make sure to follow the steps below closely and we should be good to go:
In the Windows Search bar, type regedit, and open Registry editor.
Open the File option and create a backup of your current registry state.
Follow this path:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRun
Name value exactly as the program you want to run is named.
In the Value data field, paste the exact path of the program’s EXE file (including the exe file, like all the above-enlisted programs).
Save changes and restart your PC.
9: Reset this PCFinally, if you’ve reached the brink of your nerves and the system just won’t comply, the only remaining solutions we can offer is to start from a scratch.
We won’t go as far as to recommend a clean reinstallation, and luckily, with Windows 10 you don’t need it. What you can do is to check for the recovery options and use Reset this PC.
Restoring the system to its default values should be the final resort, but also it can help.
In addition, you get to keep your files without losing any important data in the process. If you’re up for the task, follow the instructions below:
Press Windows key +I to open Settings.
Open Update & security.
Select Recovery from the left pane.
Was this page helpful?
x
Start a conversation
Cannot Create A New Folder In Windows 11/10
Cannot create new folders in Windows 11/10
Use keyboard shortcut
Check Folder permissions
Reset Folder View in Explorer
New context menu missing?
Create New folder missing from Context Menu
Troubleshoot in Clean Boot State
Run System File Checker
Run System Restore.
Let us see them in detail.
This problem has 2 conditions. One is the inability to create folders on the Desktop and the other situation is when you are unable to create folders inside existing folders. Try the following solutions sequentially to resolve the issue:
1] Use the keyboard shortcutThe keyboard shortcut to create a new folder is CTRL+SHIFT+N. You could try it to create a new folder. If it works, you would save a lot of time with more complicated solutions. Though it will still be a workaround and not a fix.
2] Check Folder permissionsWhile users have permissions to create new folders by default, the Folder permissions could get altered by a virus, malware, Windows Update, etc. In such a case, you can check for folder permissions and correct them as follows:
Go to the Security tab and select the user which is logged on to the system.
In the section for Permissions, under Allow, check the boxes for Full control and Write.
Check if it resolves the problem.
Lack of permissions is the main cause of the issue in discussion. Adding them should resolve the problem in most of the cases.
If adding the permissions doesn’t help, or if you are facing this problem on the Desktop too, try the following solutions sequentially:
3] Reset Folder View in ExplorerBy default, the File Explorer is set to permit users to create sub-folders. If the settings changed due to any reason (like a virus, malware, Windows update, etc), you can reset the Folder View back to default, either through the File Explorer or the Registry Editor.
4] New context menu missing? 5] Create New folder missing from Context Menu ComputerHKEY_CLASSES_ROOTFolderNow on the right side, ensure that the value of Default is set to Folder.
Thanks for this tip, Bubble Widgets.
6] Troubleshoot in Clean Boot stateIn case any third-party program is preventing the creation of a new folder, the cause could be isolated by restarting the system in Clean Boot State. In this state, the system will boot, but no third-party program will launch automatically at startup. Thus, you would be able to find out whether a third-party program is causing the issue or not.
If not, you can check through the default startup programs and disable the troublesome one.
7] Run System File CheckerThe issue in discussion is unexpected, yet a common problem. One of the reasons behind such an issue could be corrupt or missing system files. A SFC scan could help check for corrupt or missing files and replace them if necessary.
8] Run System RestoreIf everything else fails, you could try to restore the system to an earlier System Restore point when you know if it was working well. It is quite possible that recent changes to the system could have caused the issue and a System Restore could fix this problem. It should be noted that a System Restore works only if you created a restore point earlier. Thus, we suggest creating restore points from time to time.
Hope it helps!
How To Rename Or Delete Software Distribution Folder In Windows 11/10
The SoftwareDistribution folder in Windows operating system is a folder located in the Windows directory and used to temporarily store files that may be required to install Windows Update on your computer. It is thus required by Windows Update and maintained by WUAgent.
SoftwareDistribution folder locationThe Software Distribution folder in Windows 11/10/8/7 is situated in the following location in File Explorer:
C:WindowsSoftwareDistribution
On my computer is size is around 1 MB, but its size could vary.
Is it safe to delete SoftwareDistribution folderWhile you do not want to touch this folder under normal conditions, you may need to empty its contents should you find that your system’s Datastore and the Download folder have got de-synchronized, resulting in your Windows Updates not working properly.
It is generally speaking safe to delete the contents of the Software Distribution folder, once all files required by it have been used for installing Windows Update. Even if you delete files otherwise, they will get automatically downloaded. If you were to delete the folder itself, it will get automatically re-created and the required WU components downloaded automatically.
However, this data store also contains your Windows Update History files. If you delete them you will lose your Update history. Moreover, the next time you run Windows Update, it will result in a longer detection time.
If your Windows Update is not working properly or not working at all or if you find that the size of this folder has really grown large, then you can consider deleting the Software Distribution folder in Windows 11/10/8/7.
If it is just the size, then if you use Disk Cleanup Tool and opt to Clean up System Files on your System Drive, and then Windows Update components & Delivery Optimization files , you will find that the size of this folder will get substantially reduced. But if you are facing Windows Update issues, then you flushing this folder has been known to help fix several issues like Windows Update not working, Windows Updates fail to install, Failure configuring Windows updates, Windows Update stuck downloading updates, We couldn’t complete the updates, Windows 10 keeps installing the same update and so on.
Delete Software Distribution folderTo delete the contents of the Software Distribution folder, in Windows 11/10, from the WinX Menu, open Command Prompt (Admin). Type the following one after the other and hit Enter:
net stop
wuauserv
net stop bitsThis will stop the Windows Update Service and the Background Intelligent Transfer Service.
Now browse to the C:WindowsSoftwareDistribution folder and delete all the files and folders inside.
If the files are in use, and you are unable to delete some files, restart your device. After rebooting, run the above commands again. Now you will be able to delete the files from the mentioned Software Distribution folder.
After you have emptied this folder, you may restart your computer or you may type the following commands, one at a time in the CMD, and hit Enter to restart the Windows Update related Services.
net start
wuauserv
net start bitsNow that folder has been flushed, it will now get populated afresh.
Rename SoftwareDistribution folderIf you wish to rename the Software Distribution folder, open an elevated command prompt windows, type the following commands one after the other, and hit Enter:
net stop wuauserv net stop bits rename c:windowsSoftwareDistribution SoftwareDistribution.bak net start wuauserv net start bitsAlternatively, you may also boot Windows into Safe Mode, and rename SoftwareDistribution to chúng tôi or SoftwareDistribution.old.
Hope you find the post useful.
Want to learn more about the following folders?
Automatic Startup Repair Couldn’t Repair Your Pc In Windows 11/10
Automatic Startup Repair couldn’t repair your PC . Press “Advanced options” to try other options to repair your PC or “Shut Down” to turn off your PC. Log file: C:WindowsSystem32LogfilesSrtSrtTrail.txt
How to fix Startup Repair couldn’t repair your PCIf you get into this situation here are a few things you could try. Please go through the entire list first and then decide which of the suggestions may apply in your case and which of these you would like to try:
Rebuild BCD & Repair MBR
Run chkdsk
Run SFC and Use DISM Tool in Safe Mode
Disable Early launch anti-malware protection
Disable Automatic Startup Repair
Restore registry from RegBack directory
Reset This PC.
Before you begin checking this log file could give you an idea of the error cause:
C:WindowsSystem32LogfilesSrtSrtTrail.txt What is the chúng tôi file?SrtTrail.txt is a log file that logs down causes that may have caused Automatic Startup Repair to fail or cause a Blue SCreen Stop Error. It is located at C:WindowsSystem32LogfilesSrtSrtTrail.txt. chúng tôi does not cause Blue Screens – it is merely a log file that records issues for troubleshooting purposes.
SrtTrail.txt Windows 11/10 Fixbootrec.exe /rebuildbcd bootrec.exe /fixmbr bootrec.exe /fixboot
These commands will fix Boot Sector problems. After running these commands, check whether you can start normally or not.
2] Run chkdskChecking the Disk for errors might be a good idea. So again open the Command Prompt windows as explained above and run the following command and see if that helps:
chkdsk /r c:For your information, the command will scan and fix the problems of your C drive only.
3] Run SFC and DISM Tool in Safe ModeBoot Windows 10 in Safe Mode, open Command Prompt with administrator privilege, and first Run SFC
Then Run DISM to repair the System Image:
DISM /Online /Cleanup-Image /RestoreHealthThis command will use the Deployment Imaging and Servicing Management tool to scan for possible corruption. For your information, this command takes a while to run so do not close the window.
Related: The operating system version is incompatible with Startup Repair.
4] Disable Early launch anti-malware protectionOn the Startup Settings page, hit the Restart button.
You will on restart see this screen. You need to press the ‘8’ key on your keyboard to select Disable early launch anti-malware protection setting.
Your system will start that within moments.
Related: How to repair Windows 11 without losing data or programs
5] Disable Automatic Startup Repair bcdedit /set recoveryenabled NORestart your computer and see.
Related: Windows Automatic Startup Repair not working.
6] Restore registry from RegBack directorySometimes, a wrong registry value can create this problem. See if restoring the registry helps you. To do this open the Command Prompt from Advanced options, and execute the following command-
copy c:windowssystem32configRegBack* c:windowssystem32configYou will be asked whether you want to overwrite all files or partially. You should type All and hit the Enter button. Following that, you need to restart your computer and check whether the problem remains or not.
7] Reset this PCThis option in Windows 11/10 helps users get factory settings without removing any personal files. Use the Reset this PC option in Troubleshoot menu as the last option.
There are a few other things you could try, and these are related to your hardware actually.
Unplug and reconnect the hard drive
Reconnect RAM
Unplug all external devices.
How do I bypass automatic repair on Windows?To bypass automatic repair on Windows 11/10, open Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter. Then, restart your PC. The Automatic Startup Repair should be disabled and you might be able to access Windows 11/10 again.
What happens when Windows Startup Repair Fails?If Windows 11/10 Startup Repair Fails, then your next option is to try using your Windows 11/10 installation media to fix the boot. You will need to enter a set of commands in Command Prompt to find and resolve issues that might be preventing your computer from booting.
All the best!
Related read: Windows Automatic Startup Repair failed.
Internet Connection Is Limited In Windows 10/11
Internet connection is limited in Windows 10/11 [Full Guide]
2
Share
X
Network
problems
are notoriously unpleasant and the limited
Internet connection
in
Windows 10
doesn’t deliver any information on the problem.
The potential fixes for this mind-wrecking issue are the reset your Wi-Fi network or modem and be sure your drivers are updated.
If you follow this step-by-step guide you will learn how to solve this problem easily.
Network problems are common in Windows 10, and in this article, we’re going to show you how to solve one strange network problem, a problem with a limited internet connection in Windows 10.
So, if you’re facing this issue, I hope these solutions will help you.
How do I fix problems with limited connection in Windows 10?Limited Internet connection messages can cause problems and prevent you from accessing certain websites. Speaking of this message, users reported the following problems as well:
Limited access WiFi Windows 10 – This message can occur if you’re using a wireless connection. If that happens, make sure that your drivers are up to date.
Limited internet connection on laptop, WiFi, unidentified network, getting disconnected frequently, keeps dropping – There are various problems that can occur due to this message, and if you’re having any of them, be sure to try some of our solutions.
Limited internet access Ethernet, VPN – Sometimes this problem can occur while using an Ethernet connection or VPN. If this happens, be sure to check your network settings.
Limited internet access yellow triangle, LAN – This is a relatively common problem on many PCs, but in order to fix it, you just need to run a network troubleshooter.
1. Restart your modem or WiFi adapterThere are several ways to do it, but the easiest possible way is to use a dedicated professional solution like Outbyte Driver Updater.
It’s so easy to update your drivers automatically using this awesome solution that it only takes 3 steps:
⇒ Get Outbyte Driver Updater
3. Check your antivirus settingsHaving an antivirus is important, but sometimes certain issues can occur due to your antivirus. Many users reported that the Limited Internet connection message can be caused by your antivirus and in order to fix that you need to change your settings.
If the issue still persists, you’ll need to uninstall your antivirus completely and check if that solves the issue. If removing the antivirus solves the problem, you should consider switching to a different antivirus solution.
Before starting to tweak your old antivirus, we recommend switching to a security solution that doesn’t interfere with your system and it has a very low impact on its resources.
4. Reset the TCP connection 5. Run the Windows Networking TroubleshooterFollow the on-screen instructions.
If your troubleshooter doesn’t load or you encounter an error, check out this useful guide that will help you solve the problem.
6. Assign a manual IP addressNote: Keep in mind that these numbers might not work for you, so you’ll need to change your IP address according to the format of your Default gateway.
To find out what is the Default gateway on your PC, just check the network properties on your PC or on any other device that has Internet access.
Expert tip:
7. Change your DNS
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
Note: If you prefer OpenDNS you can use it instead of Google DNS. After switching your DNS, check if the problem is resolved. Keep in mind that this solution might slow down your network connection a bit.
If you are already using a custom DNS, select Obtain DNS server automatically option and save changes.
8. Reset your routerAccording to some users, sometimes, the Limited Internet connection message can appear due to your router’s configuration.
Several users reported that they fixed this problem simply by resetting their router to default, so you might want to try that.
To reset your router, you need to access your router’s configuration page and choose the reset options from there. However, you can also reset your router by pressing the hidden reset button on your router.
9. Reset BIOS to defaultFew users claim that they fixed this problem simply by resetting their BIOS to default. If you have a built-in network adapter, you might be able to configure it from BIOS.
Sometimes your BIOS settings might interfere with your network configuration, and in order to fix the problem, you need to reset your BIOS to default.
If you don’t know how to access your BIOS, here’s an excellent guide to help you with that.
10. Rollback your network driverOnce you uninstall the network driver, restart your PC and Windows will install the missing driver automatically.
If you successfully rolled back your driver and want to avoid similar issues in the future, you can block Windows 10 from auto-updating a certain driver with the help of this step-by-step guide.
Our Tech Troubleshooting section will provide solutions for any other problems with your PC. For any online solutions or information visit our Web & Cloud Hub.
Was this page helpful?
x
Update the detailed information about Where Is The Startup Folder In Windows 11/10 For All Users on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!