You are reading the article What Is Fast Startup In Windows And How To Enable Or Disable It updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 What Is Fast Startup In Windows And How To Enable Or Disable It
One of the newer additions to modern versions of Windows is Fast Startup. This feature claims to speed up your boot time, so you spend less time waiting for your computer to boot and more time using it. Windows machines typically have this feature enabled by default, so users may already be experiencing fast boot times without realizing it. While it may sound like a great feature, there are a few cases where you may want to consider disabling Fast Startup.
Tip: wondering whether the best course of action is putting your laptop to sleep or shutting it down? We answer the question.What Does Windows Fast Startup Do
To understand why someone may want to enable or disable Fast Startup, we have to first understand what is going on under the hood when it’s enabled. What causes the boot time to speed up?
When Fast Startup is enabled, the computer doesn’t perform a cold shutdown. Instead, it stores system files in a hibernation file before turning itself off. When you reboot the PC, it accesses the hibernation file and resumes your session from the data contained there. The PC doesn’t have to reload everything from scratch, resulting in a faster overall boot time.
Overall, this works as a hybrid of a cold shutdown and hibernation. Because it requires Windows’s hibernation capability, Fast Startup can only be enabled if hibernation is turned on.Why Disable Fast Startup?
A faster boot time sounds like a great feature to have, so why would you want to disable it?
Some device drivers may greatly dislike being put into hibernation. As a result, they may cause strange things to occur, such as making the device act funny or even crashing the computer. Because your computer isn’t shutting down fully, these devices are being brought in and out of hibernation and causing issues.
It’s worth noting, however, that if you restart the PC with Fast Startup enabled, it will perform a cold shutdown anyway before booting back up again. This is helpful if you want to give your system a proper shutdown, such as when you’re updating software.
Tip: did you put your Windows PC in sleep mode, but it keeps waking up? Learn how to prevent that.Should Fast Startup Always Be Disabled?
No! Fast Startup can cause issues, but it doesn’t need to be disabled if you don’t have any problems with it. If you’ve used a Windows machine for a while without experiencing any issues, you can keep it enabled and enjoy the extra time shaved off your boot process. Just keep in mind that if you want to access the hard drive from outside Windows (such as when running an SFC scan), you won’t be able to.
If you’re noticing issues, such as driver BSODs or devices not working as they should, try disabling Fast Startup and see whether it can help. This is especially true if you notice these problems vanish after you restart the PC and trigger a proper shutdown. If you absolutely want to dual-boot or access your hard drive outside of the Windows environment, you should disable Fast Startup.How to Enable or Disable Fast Startup
Before you enable Fast Startup, you need to ensure that hibernation is enabled, as Fast Startup will not work without it.Enable Hibernation
- Enable Fast Startup via Control Panel
Now that you’ve confirmed that hibernation is enabled, you can enable Fast Startup from the same settings page used above.
Good to know: check out this list of handy registry hacks to optimize your Windows experience.Enable Fast Startup from the Registry Editor
If you want to enable Fast Startup using the Registry Editor, follow the steps below:
Search for and open Registry Editor from the Windows Search bar.
Navigate to the following location:
- Disable Fast Startup Using Command Prompt
If you don’t want to use Windows Settings or the Registry Editor to enable or disable Fast Startup, you can use the Command Prompt.
In the Command Prompt window, type the following command: powercfg -h off. Press Enter.
This will disable hibernation and, consequently, Fast Startup.
Good to know: ever wonder what the differences are between Command Prompt and PowerShell? We detail them for you.Frequently Asked Questions Does Fast Startup drain battery?
Yes, Windows consumes more battery on some laptops if Fast Startup is enabled. Typically, the feature should work only to speed up your boot time, but in some instances, users face battery drainage if this feature is turned on. You can disable it and check whether the battery life of your laptop improves as a result. If it doesn’t, you can safely turn it back on.Does Fast Startup interfere with Windows updates?
When Fast Startup is enabled, your computer doesn’t perform a regular cold shutdown, which is often required to apply Windows updates. This can make your system outdated over time and vulnerable to security threats. Hence, if you want to ensure Windows updates are always installed automatically, disable Fast Startup. Alternatively, restart your computer to apply the latest updates.Is Fast Startup bad for an SSD?
Although Fast Startup will not affect the health of your SSD, it will do very little to improve boot time, as SSDs are already significantly faster than older hard drives. Therefore, disabling Fast Startup on a modern SATA or NVMe SSD can be a sensible choice, especially if you want to dual-boot or save storage space by disabling hibernation.
Image credit: Freepik. All screenshots by Tanveer Singh.
Tanveer hunts far and wide for PC Hardware, Windows, and Gaming ideas to write about. An MBA in Marketing and the owner of a PC building business, he has written extensively on Technology, Gaming, and Marketing. When not scouring the web, he can be found binging on The Office, running for his life in GTFO, or wrecking karts in Smash Karts.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
You're reading What Is Fast Startup In Windows And How To Enable Or Disable It
What is AcroTray, and how do I Fix, Disable, or Remove it? Using the Task Manager is the fastest way to disable the service
The chúng tôi process is one associated with the Adobe Acrobat
This guide answers most user questions about AcroTray, like what it does and whether it is functional.
We’ve also included tips on identifying and disabling it from running.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
readers this month.
Let us explore AcroTray with you in this article.
Adobe Acrobat is the leading PDF software for opening Portable Document Format files. It’s used in several industries, including educational documentation, information technology, business, and administrative support.
Some Adobe Acrobat users might be familiar with AcroTray. It is an Acrobat EXE file that some users notice on Task Manager’s Startup or Processes tabs.
In this article, we will share insights into this tool, showing you how to fix common issues as well as remove them.What does AcroTray exe mean?
Some users might wonder what exactly AcroTray is. Adobe Acrobat Tray Icon is Adobe’s extension (or helper application) for converting documents to PDF files.
This helper application enables users to print PDFs directly from MS Office applications. It also keeps track of Acrobat updates.Is AcroTray EXE safe?
The actual AcroTray EXE is a legitimate Adobe Acrobat file and process. However, as it’s an EXE file, some malware programmers disguise their virus script as AcroTray EXE files.
If you haven’t installed Acrobat and noticed an chúng tôi process in Task Manager, you’ve probably discovered an AcroTray virus.Do I need Adobe AcroTray at startup?
As mentioned, PDF document conversion is the primary function of the helper service. So, users who often convert documents to PDF format need AcroTray to start with Windows.Is it OK to disable AcroTray?
Disabling the helper service could generate some document conversion issues. However, it’s somewhat extra to have a background helper application for users who don’t need to convert documents to PDF format.
Furthermore, AcroTray can slow down your system startup and consume RAM. Thus, some good reasons exist to disable AcroTray, and users who don’t need that helper application should consider disabling it.How do you stop AcroTray? 1. Using the Task Manager
Following the above steps will terminate the AcroTray process. However, AcroTray will automatically start on many users’ PCs during system startup.2. Using Services.msc 3. Using the Autoruns utility
The popular free software from Microsoft, Autoruns, provides a sophisticated view of the applications configured to execute as soon as the machine powers up.Is Acrotray necessary?
The Acrotray service is not essential, but it is convenient if you need to perform functions like converting files to PDF.
The AcroTray (Adobe Acrobat Tray Icon) background process is a helper service and is only usually necessary when working on Adobe products.
You can halt the process when you do not need it, prevent AcroTray from running, or stop AcroTray from loading.
There you have it. You can always use any solutions to disable or stop the service when you do not need it.
Disabling it may be the right step, especially since it might still be an extra process for many users, even though it serves a critical Adobe Acrobat function.
Lastly, an easy way to disable it is to uninstall Adobe Acrobat, which users can replace with numerous PDF software alternatives.
Was this page helpful?
Start a conversation
Since the time NTFS was devised and formulated in the Windows OS, data storage requirements have drastically changed. There was a dire need for a next-generation file system which could work well and take care of the issues which were present in NTFS. That’s when Microsoft called the shots and developed ReFS (Resilient File System) back in 2012 – and was introduced in Windows 8.1 and Windows Server 2012. ReFS was designed to maximize the data availability and reliability even if the concerned storage devices experienced a hardware failure.
Ever since storage devices came into play, the requirement of storage space has increased exponentially. Even multi-terabytes of storage devices are common these days. Hence, a need for persistently reliable structure kept cropping up simultaneously. ReFS has an architecture that is designed to work well with extremely large data sets without any performance impact. In this guide, we will see how to enable or disable the ReFS File System in Windows 11/10 and try to format a drive using it, but before that let’s have a look at some key features of this stately file system.
In this article, we will talk about the features of the Resilient File System and see how to enable or disable the ReFS File System in Windows Server operating system, and try to format the drive using this file system.Features of Resilient File System
Data Availability: ReFS File System proliferates data availability by showing resiliency to data corruption or failures. Automatic data integrity checks help keep ReFS online, and you hardly suffer any volume downtime.
Tensile Scalability: Requirements for the increased amount and size of the data keep surging up with the changing technology. ReFS puts forth the ability to challenge extremely large data sets and work well with them without any performance issues.
Acute Error Correction: ReFS File System comes coupled with an automatic data integrity scanner known as Scrubber which periodically scans the data volume, identifies the potential corrupt sectors, and processes them for repair.Which file system does Windows 11/10 use?
If it is a standard default installation, the OS uses the NTFS structures. With a failed Windows 11/10 operating system with Storage Space enabled, it is the ReFS + NTFS file systems.Enable ReFS File System on Windows 11/10
Now that you know that ReFS came into existence to cope up with the limitations of the NTFS File System let’s take a look at how you can enable it on your Windows 11/10 system and use it to format an external drive.
Before proceeding with the changes, please make sure to create a system restore point. If any issue comes up in future, then you can use this restore point to roll back the changes.
1. Press Windows Key + R on your keyboard to launch Run prompt. Type chúng tôi and hit Enter to open Registry Editor.
2. Navigate to the below path on the left side pane of Registry Editor.HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlFileSystem
3. Create a DWORD and name it RefsDisableLastAccessUpdate. Set its value as 1 to enable it.
4. Up next, navigate to the below path in left side pane.HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlMiniNT
Now under this key, create a new DWORD and name it as AllowRefsFormatOverNonmirrorVolume and set its value as 1 to enable it.
6. Sign out and sign in again to make the changes effective. Now you can plug in an external device and choose ReFS file system to format it. Also, you can open the Properties leaf of any drive to see what File System it is associated with.What is Resilient File System or ReFS?
Resilient File System or ReFS is a file system like NTFS, exFAT, etc. However, it is capable of working with large datasets without impacting the performance in any way. When NTFS and other formats fail to execute required high-end tasks fluently, ReFS does the job effortlessly.How do I enable ReFS file system?
You can read more about ReFS or Resilient File System on Technet.
Microphone Boost Missing in Windows 11: How to Enable It Not all the microphones can use the Microphone Boost feature
If Microphone Boost is missing in Windows 11 on your PC, the driver for your microphone might need updating, or you might need to reconnect the device.
Updating sound device drivers can sometimes restore the Microphone Boost option in Windows 11.
Some users have restored the missing mic booster feature by reconnecting their microphones.
INSTALL BY CLICKING THE DOWNLOAD FILE
Fix Windows 11 OS errors with Fortect:
This tool repairs common computer errors by replacing the problematic system files with the initial working versions. It also keeps you away from system errors, BSoDs, and repairs damages made by malware and viruses. Fix PC issues and remove viruses damage now in 3 easy steps:
Download and Install Fortect on your PC
Launch the tool and Start scanning to find broken files that are causing the problems
Fortect has been downloaded by
readers this month.
The Microphone Boost setting in Windows 11 enables users to increase mic volume. That’s a handy feature for users who utilize their microphones with apps like Discord and Skype.
However, some of our readers have reported the Microphone Boost option to be missing on their PCs. If that feature is missing in Microphone Properties on your PC, you might be able to restore it as outlined below.Does your mic/sound card support Microphone Boost?
Note that it’s not necessarily entirely unusual for the Microphone Boost option to be missing on the Level tab. That feature isn’t available for all microphones and sound cards.
So, it might be the case you need to add a new PCI sound card or microphone to your PC to enable that feature. However, there can also be other reasons for a missing Microphone Boost setting, such as:
Outdated microphone driver
The microphone is connected to the wrong port
If you’re sure Microphone Boost should be available on your PC, there are a few ways you might be able to re-enable it. Try applying the following Windows 11 methods for enabling missing Microphone Boost.How can I fix a missing Microphone Boost setting in Windows 11?
Before getting into more complicated tweaking, let’s make sure that we check the following steps:
If you’re using an external microphone, make sure you’ve plugged it into the right port on your PC. Or try plugging a USB microphone into a different USB slot.
Select the correct microphone in the Input device settings from the Audio options.
If these methods didn’t fix the problem, follow the solutions below to correct it.1. Check the microphone you utilize is set as a default device 2. Open the troubleshooter for recording audio
You can update your microphone’s driver with one of the methods in WR’s guide to updating drivers in Windows 11.
Another dependable solution that you can use to update your microphone’s driver is a dedicated tool designed to perform this automatically.
Outbyte Driver Updater is the best choice because it helps you run a complete scan to find outdated, missing, or malfunctioning drivers and update them with new versions immediately after.
If you’re looking for the easiest way to update your drivers, Outbyte Driver Updater is the best tool.
Free Trial Download now4. Reinstall the sound card’s driver
Those resolutions can restore a missing Microsoft Boost setting on supported hardware. If they don’t work, then it’s probably the case that the feature doesn’t support your sound card.
We also recommend reading our guide on what to do if the microphone is not working in Windows 11.
Still experiencing issues?
Was this page helpful?
Start a conversation
The Concept of “Average Check”
In fact, it is the amount by which a customer buys goods or services from you at a time. You can determine the average check of the whole business, and you can use a separate group of goods, branches, or departments of the enterprise. Of course, this requires appropriate financial accounting.How to Calculate?
The average check per day = earnings per day/number of checks per day.
You can also calculate the average check for a week or a month. However, a one-time calculation does not give an understanding of the state of affairs, it is necessary to analyze the dynamics of the average check. By tracking how this figure changes over the months, you will see seasonality and other factors that affect sales.Why Do You Need This Indicator?
The average check shows the state of your business. Both on its own and with other indicators, it provides answers to many questions, including:
how solvent your client is;
do you have a sufficient range of goods;
whether the system and sales managers work well;
whether the action you are conducting is effective;
the period of high and low sales season;
from what amount customers should be given discounts or bonuses;
which group of goods or services do customers buy the most.
Here are the top 5 effective ways to increase the average check:
cross-selling + up-selling;
implementation of a loyalty program;
determination of the threshold for free delivery of goods;
formation of sets of goods or services (bundles);
introduction of discount coupons for a limited time.
Cross-selling and Up-selling
It is better to combine these two methods into one category.
Up-selling is an offer to the buyer of a more expensive, refined, the premium analog of a product or service. For example, a more modern model, a well-known brand, a new trendy service, or a dish made of organic products. This method is appropriate if you have a range of goods or services with a wide range of prices.
Cross-selling involves cross-selling when the customer is offered related products and services during the purchase. This method is suitable for any business: online and offline applies to both goods and services. Of course, the range should include these related products.
Most businesses use cross-sell technology. You buy a product, and you are immediately offered to buy something auxiliary to it. A classic example: the phone offers a case, headphones, protective glass, and a power bank. In this case, we do not sell something that a person does not need but help him protect his new phone, conveniently listen to music, and charge it on the go. This is the most organic way to increase the average check.
Artix Linux is a fast and easy to use Arch Linux-based distribution. It started as a version of Arch Linux without SystemD around 2023. Since then, it has grown to be a distribution that aims to create an Arch Linux environment that promotes package simplicity and security.Why Use Artix Linux?
One of the main selling points of Artix is that it maintains a version of Arch Linux without SystemD. Similar to Devuan, this means that Artix does not include software and kernel configurations that are associated with the SystemD init system. This, in turn, reduces the amount of programs that you install and run in your computer.
Another selling point for Artix is that it treats alternative init systems as first-class citizens. This means that, unlike Arch, Artix provides you with the choice of picking the init system that you want for your computer.
This can be especially useful if you want to optimize a system for a specific use-case. For example, you can install Artix with runit if the system does not need complex process management.
With that, Artix gives you the ability to explore and experiment with different kinds of init systems for your machines. Further, Artix allows you to take control of what you want to use your computer for. Its nonreliance on SystemD enables it to be highly flexible, simple and secure.Obtaining Artix Linux
You can obtain a copy of Artix from the distribution’s download page. From there, you can choose between three different installers with varying degrees of customization:
The base installer is similar to the default Arch Linux installer. It is a live ISO that you can write to a disk to boot into a basic Artix environment. From there, you need to perform the whole installation manually. This is useful if you want to either install Artix from scratch or create a basic server installation.
The graphical installer is similar to a regular Linux install CD. This provides an intuitive interface to create a basic installation of Artix. Not only that, the graphical installer also includes a barebones desktop environment. This is useful if you want a quick and easy way to use Artix.
The community installer is a whole desktop installation of Artix. This provides a complete desktop experience which includes additional applications such as office programs and basic desktop tools. This is useful if you want to either have an Artix system that works out of the box or you intend on installing Artix to multiple machines.Choosing the Init System for You
From there, one important thing to note is that an Artix installer will only contain a single init system. This will be the init system that the installer will boot from and it will also be the one that it will install in your machine.
Knowing that, Artix supports five different init systems that you can install:
In my case, I want my install to be an XFCE environment with runit. To do that, I can press the XFCE icon in Artix’s download page and select the “artix-xfce-runit” version.
From there, you can now create a USB installer for your Artix disk by using a tool such as balenaEtcher.Booting into the Artix Live Disk
Once done, you can then boot into the Artix installer disk through your computer’s BIOS menu. In most cases, you can access this by pressing F2 or F10 when you start up your computer.
Doing that will load a custom GRUB menu where you can change some of the settings of the live disk:
The tz option tells the Artix installer to set the timezone of the live disk to the region that you want. By default, it uses the UTC timezone to determine the time.
The keytable option, meanwhile, sets the keymap of the live disk. By default, the Artix installer uses the standard American keymap. As such if you are using anything other than that, you need to set this option to your local keymap.
On the other hand, the lang option sets the overall language of the live disk. At the moment, Artix supports 15 different languages for its distribution. One important thing to note is that this will only affect the language of your live disk.
From there, you can now boot into the live disk by selecting “From CD/DVD/ISO: artixx86_64”.Installing Artix Linux
From there, the Artix Linux installer will check for your system’s configuration and determine whether you can install it or not. Once done, it will display a splash screen that will ask you for your preferred system language.
After that, the installer will ask for the region that you are installing Artix in. The installer will then use this to determine your timezone as well as the date and number formats that the system will use.
From there, the installer will ask for the keyboard map that you want to use for your machine. If you have a different keyboard map for the live disk, you will need to provide the same keyboard map here.Disk Partitioning for Artix Linux
Once done, the installer will then ask for your preferred disk partition method. In that, there are three ways to setup a disk for Artix:
The “Replace Partition” option only shows up if you have a different distribution present in the hard disk. In this, the installer will attempt to remove the old distribution and use its partition layout to bootstrap Artix. This can be useful if you have a custom partition layout that you want to preserve for Artix.
The “Erase Disk” option will clear the entire disk, including its partition layout, to install a wholly new Artix Linux install. Further, this option also allows you to set a swap partition optimized for Artix.
Lastly, the “Manual Partitioning” option will allow you to create custom partition layouts for your Artix system. This can be especially useful if you want to create separate partitions for system directories.
By default, the installer will not select a swap partition for your system. However, it is good practice to at least have a basic swap partition. In here, I will select “Swap (with hibernate)” to give the system enough swap space to allow it to sleep when I am not using it.
From there, the installer will then ask for additional options such as disk encryption and separate bootloader partitions. In most cases, you can leave those options to their default settings.User Information
Once done, the installer will ask for your user information.
From there, you can also set the password for your administrator account. This will be the password that you will use to access your root user. In that, Artix allows you to use the same password for the user and root user.
However, it is good practice to have two different passwords for those two accounts. This will ensure that if anyone cracks your user password that they will not be able to do significant damage to your system.
Once done, you can press Next to view a summary of your installation settings. From here, you can still go back and make any necessary changes to your installation. Once you press Next, however, Artix will start the installation process with your preferences.
From this point on, the Artix installer will automatically install the distribution to your disk. At most, this process will take around 10 to 15 minutes.Final Steps
Congratulations! You know have a basic installation of Artix Linux. Aside from that, you also now have a basic idea of the different init systems that you can use for your system.
If all this talk made you curious about what you can do with your new Linux system, you can check out some of the best email clients for Linux.Frequently Asked Questions 1. The installer went into sleep and now it is asking for a password. Did my installation fail?
No! Since the live disk is a complete Linux environment, it can sleep and lock itself if you leave it unattended. You can log back in to the live disk by entering artix as your username and password.2. Is it possible to install Artix alongside other distributions?
Yes! It is possible to install Artix alongside other distributions. In order to do that, you need to use Artix’s manual partitioning to create an unallocated space after Artix. From there, you can then use that space to install a different distribution.
One important thing to note, is that if you intend on dual booting Artix with Windows you need to make sure that Windows is installed first. This is because Windows needs to be in the first sectors of a disk in order to work properly.3. Is it possible to change an init system after installation?
Ideally, yes. However, doing this will run the risk of making your system unusable. This is because the init system is an integral part of a machine’s boot process. This ultimately means that any mistake while configuring a new init system can make your machine unbootable.
Despite that, if you still want to change your current init system you need to make sure that your system is backed up. Further, you also need to make sure that you have read the documentation for that init system. This includes Artix’s wiki page about that init system and its official manual.
For example if you want to install runit on a non-runit Artix system, the wiki page for runit will highlight the steps on doing it.
Image credit: Unsplash
Ramces is a technology writer that lived with computers all his life. A prolific reader and a student of Anthropology, he is an eccentric character that writes articles about Linux and anything *nix.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Update the detailed information about What Is Fast Startup In Windows And How To Enable Or Disable It on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!