Trending February 2024 # Troubleshooting Xbox One Error 0X800704Cf # Suggested March 2024 # Top 5 Popular

You are reading the article Troubleshooting Xbox One Error 0X800704Cf updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Troubleshooting Xbox One Error 0X800704Cf

Error code 0x800704cf indicates there’s a network problem that’s preventing you from signing in to your Xbox account. The same error may occur when the console can’t launch your favorite games due to network issues.

‘You’ll need the Internet for this. It doesn’t look like you’re connected to the Internet. Please check your connection and try again. 0x800704cf’.

How to Fix Xbox One Error 0x800704cf Check the Service Status

Since this error usually appears when there’s a general network problem, start by checking the Xbox Service Status.

If there’s a known issue that could be triggering error 0x800704cf, it should be on the list. If this the case, wait until Microsoft has fixed the problem.

Try Again

The error could also be triggered by temporary server issues caused by an unusually high number of requests. In other words, the Xbox servers are overwhelmed. Wait five or 10 minutes. These issues usually disappear after a few minutes.

Restart or Unplug Your Modem

If the issue persists, it’s time to check your network. Restart your modem and check if this quick workaround did the trick.

Try unplugging the modem if you haven’t done that in weeks. Unplug the power cable and leave your modem unplugged for three minutes. Then power it back up and check if the error code 0x800704cf is still there.

If you suspect the error is caused by low bandwidth problems, disconnect all the other devices using the network.

Clear Local Xbox 360 Storage

Navigate to Settings.

Select System.

Go to Storage.

Then select Clear local Xbox 360 storage.

Restart your console and check again.

Clear the MAC Address

You can also try to change the MAC address of your console.

Navigate to Settings.

Go to General settings.

Select Network Settings.

Then go to Advanced Settings.

Locate and select Alternate MAC Address.

Clear the current MAC Address.

Restart your console and reconnect to your network. The console should start updating now if there’s a new version available.

Which brings us to the next solution.

Update Your Console

If you’re running an outdated system version, don’t be surprised if your console becomes a bit glitchy.

Go to Profile & system.

Select Settings.

Then go to System.

Select Updates to check for updates.

Go to the Troubleshooting Screen

If the console is not updating correctly, do this:

Take out the power cable and leave your Xbox console unplugged for 3 or 4 minutes.

Then hold the Sync button on the controller and press the Eject button.

While holding down these buttons, press the ON button on the console.

Wait until you hear a second ON sound. You can then release the Sync and Eject buttons.

You should see the troubleshooting screen now.

Select Continue and update your console.

Launch a Game Without Signing In

Other users suggested this quick workaround worked for them:

Sign out and reconnect the console to your network.

Select a random game and launch it.

You will be prompted to sign in once you reach the game’s login screen.

Select your profile, and try to sign in. There should be no error this time around.

Reset Your IP and DNS

Refreshing your IP and DNS may help. Here’s what you need to do:

Navigate to Settings.

Go to General.

Select Network Settings.

Then, go to Advanced Settings.

Select IP Settings.

Set the IP settings to Automatic.

Repeat the same steps for the DNS settings to get a new DNS.

Check the connection.

Reset Your Console

Resetting your console without deleting your games and app may help you to get rid of this error.

Open the guide and go to System.

Then select Settings.

Go to System → Console info.

Locate the Reset console option.

Select it and keep your games and apps.

After the process is complete, you can power cycle your console.

Let us know which solution worked for you.

You're reading Troubleshooting Xbox One Error 0X800704Cf

Fix Xbox One Error Code 0X97E10Bca

If you’re an Xbox One owner who has come across an error code, 0x97e10bca, then there is no need to worry because we know what is causing it, but most importantly, we know how to fix it.

What causes Xbox One Error Code 0x97e10bca?

Now, from what we have gathered so far, the error code tends to show itself when applications conflict with each other. We should note that this error can also show itself due to conflicting Xbox One settings. Also, when this error is active, users will find it impossible to access certain Xbox Live services. Not only that, some games and applications will fail to work as expected.

It is possible this problem began due to a recent update, but at this time, we cannot say for sure. Furthermore, no one from the Xbox team has spoken of the error on the official forums; therefore, we must assume it is not affecting most users of the platform.

How to fix the Xbox Error Code 0x97e10bca

Follow the simple instructions below if you want to solve the 0x97e10bca error in Xbox One:

Turn off, then turn on the Xbox One console

Uninstall apps recently installed

Switch your internet connection type and restart your router

Factory reset your Xbox One

1] Turn off, then turn on the Xbox One console

In many cases, a simple reboot of your Xbox One is capable of fixing a lot of problems. It is very much a possibility that restarting your console could solve 0x97e10bca once and for all or temporarily.

When the confirmation box appears, select the Yes option. Right away, the system should slowly go into off mode.

From there, please unplug the power cord and wait for around a single minute. Finally, plug the power cord back into the correct socket, then restart the device by hitting the Xbox button on the controller or the power button on the console itself.

If everything goes well, then error code 0x97e10bca should no longer be a problem, at least for now.

2] Uninstall apps recently installed

As we have stated above, the error code may be caused by conflicting applications installed on your Xbox One video game system. We understand this is rare, which is a good thing, but it becomes a significant problem for those affected when it happens.

The conflict occurs if the version of the application is not compatible with the current version of the Xbox operating system. Additionally, conflict can also arise if the app was downloaded from third-party sources.

Finally, check if the issue persists. If everything is working as it should, then reinstall the game or application right away.

3] Switch your internet connection type and restart your router

The way you’re connected to the internet may be the primary cause. For example, if you are connected to the internet via a wired connection, we suggest switching to Wi-Fi in a bid to set things right. The same goes if the problem is happening over Wi-Fi. Simply switch over to a wired connection.

Another thing you could do is restart your wireless router. Unplug the device for up to 1 minute, then plug it back into the socket and hit the power button to boot.

4] Factory reset your Xbox One

Should all options above fail, your best bet is to factory reset the device.

To get this done, hit the Xbox button located on the controller to fire up the Settings area.

Reset and keep my games & apps: Choose this one if you want to keep all your video games and applications.

Reset and remove everything: Go down this route if you have no problem is wiping your entire hard drive of all its contents.

Sit back and wait for a few minutes as the Xbox One performs the factory reset procedure.

Fix: Xbox One “Something Went Wrong” Error

Fix: Xbox One “Something went wrong” Error [Expert Guide] Use the solutions provided to solve this “something went wrong” error






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Your Xbox One allows you to access all sorts of content online, but sometimes certain errors can occur. Users reported Something went wrong error on their Xbox One, and today we’re going to explain to you how to fix this error.

Xbox One error “Something went wrong”, how to fix it? 1. Redeem your code at a later time

Many users tend to use prepaid codes on their Xbox One in order to purchase online content, but sometimes certain errors can occur while doing so. If that happens it means that there’s a temporary issue with Xbox service, and in order to fix this problem you should wait for an hour or two and try to redeem the code again. In order to redeem a prepaid code Xbox Live services need to be running, but if one service isn’t running you’ll encounter this problem. To check the status of Xbox Live services simply visit Xbox website. If there’s a problem with Xbox Live services you can only wait until Microsoft resolves the issue.

In addition, you need to be positive that you’re trying to redeem a prepaid code for an Xbox game or app. If you’re trying to redeem a code for a Windows game or app, you won’t be able to complete the process on your Xbox One.

2. Check your region settings

According to users, Something went wrong error message can appear while redeeming prepaid codes if your region isn’t properly set. To fix this problem you might have to change your region settings on Xbox One by following these steps:

Changing the region on Xbox One is simple, but there are few limitations that you should know about. Firstly, you can change your region once every three months, so keep that in mind. In addition, you won’t be able to change your region if your account is suspended or if you have a balance due on your Xbox subscription. Keep in mind that certain services might not be available if you change your region, so choose your new region carefully. In addition, the money on your Microsoft account won’t be moved when you change the region, so be sure to spend it before you decide to change your region.

3. Check your billing information

If you’re getting Something went wrong error message it might be because your billing information isn’t correct. This can occur if your credit card is expired or if you moved recently, so be sure to check the billing information by following these steps:

You can also change your billing information from your browser. This is a faster solution for some users, and in order to do it you need to follow these steps:

Log in to your Microsoft account with any web browser.

Go to Payment & billing section and choose Billing info.

Select Edit profile and follow the instructions on the screen.

After the billing information is reviewed and updated, try to redeem the code again.

4. Redeem the code on the Xbox website

Something went wrong error message can appear when you try to redeem a code on your Xbox One, but a few users reported that they managed to redeem their code simply by using Xbox website. There’s an option to redeem codes on the Xbox website, so if you can’t redeem the code on your console due to this error, be sure to try redeeming it on the Xbox website.

5. Disable the Instant-on feature

You can fix this error on your Xbox One simply by disabling Instant-on feature. This feature works as a sleep mode for your Xbox and it allows you to quickly put your Xbox One in standby mode. This is a great feature, but it has its flaws, and sometimes this feature can lead to certain errors. To fix Something went wrong error you need to disable Instant-on feature by following these steps:

Go to Settings and navigate to Power & startup.

In Power Option section select Power mode and press the A button on the controller.

Select Energy-saving option.

After selecting Energy-saving option your Xbox One will turn off completely when you press the power button. This means that it will use less power when it’s turned off, but it will also start a bit slower when you turn it on. After disabling Instant-on feature, check if the error is resolved.

6. Sign out and sign back into your account

According to users, you might be able to fix Something went wrong error message simply by signing out of your account and signing back in. To do that, follow these steps:

Press the Xbox button on your controller to go back to Home screen.

Highlight your account picture in the top left corner.

Select your account, press the A button on the controller and choose Sign Out option.

After signing out you just need to log back in again and check if the problem is resolved.

Xbox One “Something went wrong” when trying to play a game 1. Restart the router

According to users, you might be able to fix this error message simply by restarting your router / modem. To do that, you need to follow these steps:

Press the power button on your modem to turn it off.

After the modem turns off wait for 30 seconds or more.

Press the power button again to turn it on.

Wait until the modem starts completely and check if the problem is resolved.

If you use both modem and wireless router, you’ll have to restart both devices in order to fix this problem.

2. Reinstall the game

Sometimes Something went wrong error message can appear if your installation is corrupted, and one way to fix the problem is to reinstall the problematic game. To do that, follow these steps:

Go to the My Games & Apps section.

Highlight the game that you want to remove and press the Menu button on the controller.

Select Manage Game option from the menu.

You should now see relevant game information such as the storage space that it takes and its saved games.

Choose the Uninstall option and wait until the game is removed from your system.

After the game is deleted, you need to install it again by doing the following:

Open Games & Apps section.

Scroll all the way right and you’ll see Ready to install list. This list consists of games that you own but you don’t have currently installed on your console.

To install a game, simply select it and wait for it to install. Keep in mind that installation process can take a while depending on your Internet connection.

Expert tip:

After the game is reinstalled, try to start it again and check if the problem is resolved.

3. Clear the cache

Xbox One stores all sorts of temporary files in its cache, but sometimes those files can get corrupted and cause this and many other errors to occur. The simplest way to deal with corrupted cache is to clear it by following these steps:

Press and hold the power button on your console to turn it off.

After the console turns off, unplug the power cable.

While the power cable is unplugged keep pressing the power button to drain the battery completely.

Now reconnect the power cable and wait until the light on power brick changes from white to orange.

Press the power button again to turn on your console.

After the console turns on the cache will be cleared and the problem will hopefully be resolved. Some users are also suggesting to start your game without signing in to your Xbox account. After the game starts, you’ll be asked to sign in to your Xbox account, so be sure to do that.

4. Restore your Xbox to factory settings

If you’re getting Something went wrong error message when you try to play a game on your Xbox One, you might be able to fix the problem by performing a factory reset. Sometimes certain game files can get corrupted, and the only way to fix the problem is to perform a factory reset. Keep in mind that factory reset might delete all your installed games and apps, therefore be sure to back them up. To restore your Xbox One to factory settings, follow these steps:

Since the download process can take a while, we strongly suggest that you move all your installed games to external hard drive before performing the factory reset.

5. Check the status of your subscriptions

Certain games require subscriptions in order to work properly, and if your subscription is expired you’ll need to renew it. To do that, follow these steps:

Log in to your Microsoft account with any web browser.

Navigate to Services & subscriptions section.

Find the subscription that is expired and select the Renew option. If this option isn’t available, you’ll have to buy the subscription again.

After your subscription is renewed, the error should be completely resolved.

6. Try restarting the game

Few users reported that they managed to fix this problem simply by restarting the game. To do that you need to follow these steps:

Press the Xbox button on your controller to return to the Home screen.

Highlight the game title and press the Menu button on the controller.

Select Quit from the menu.

Wait for 10 seconds or more and then try to launch the game again.

Sometimes there might be an issue with online update that prevents you from installing certain updates. When that happens you’ll see Something went wrong error message on the screen. To fix this error you can try installing the update offline by following these steps:

Connect NTFS USB flash drive to your PC. Keep in mind that USB flash drive needs to be empty in order to install offline update.

Download the offline system update.

The file will be stored in a zip archive so be sure to extract it.

Locate $SystemUpdate file that you extracted and move it to the root directory of the USB flash drive.

After moving the update file to the USB flash drive you need to install it by following these steps:

If possible, disconnect the network cable from your console. Alternatively, you can turn off your modem.

Turn off your console by holding the power button on the front.

Unplug the power cable and reconnect it after 30 seconds.

Press and hold the Bind button on the left side and Eject button and press the Xbox button on the console.

Hold Bind and Eject buttons for 15 seconds.

If you performed the process properly, you’ll hear two power-up sounds. Release the Bind and Eject buttons.

Connect the USB flash drive to your console.

Select Offline system update option from the menu and press the A button to start the process.

Wait until the update process completes.

After the update is installed, the problem should be completely resolved.

2. Select the Turn off Xbox option

If you’re getting Something went wrong error message after trying to install the update, be sure to try using the Turn off Xbox option. After that simply turn on your console and the issue should be resolved. Few users reported that this method worked for them, so be sure to try it out.

3. Go offline and back online

If you receive this error message after installing a new update, you might be able to fix it by going offline and back online. Few users reported that this method helped them fix the problem, so be sure to give it a try.

Fix – Xbox One “Something went wrong” startup 1. Reset your console to factory defaults

Users reported that this error occurs when they start their console, and if you have the same issue, you might want to reset your console to factory defaults. Resetting your Xbox One to factory defaults will delete all your files from your console so you’ll have to download them again. Your saved games will remain if they are synced with Xbox Live. To reset Xbox One, do the following:

On the Troubleshoot screen choose the Reset this Xbox option and press the A button.

Choose Keep games and apps option.

This option will restore your Xbox to factory defaults without affecting your games and apps. Unfortunately, this option doesn’t always work, so sometimes you might have to use Remove everything option and remove all downloaded apps and games from your system.

After resetting your Xbox One to factory defaults this error should be completely resolved.

Fix – Xbox One error “Something went wrong” party chat 1. Make sure that your NAT is set to Open

In order to use party chat on Xbox One your NAT needs to be set to Open. There are many ways to do that, but it’s usually achieved by forwarding your ports or by using DMZ or UPnP feature. We already explained in detail how to do that in “Your network is behind a port-restricted NAT” article, so be sure to check it out.

Something went wrong Xbox One error can create many problems for you, but we hope that you managed to fix it after using one of our solutions.

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


How To Fix Xbox Error Xbos3008

How to fix Xbox error XBOS3008 [6 Easy Steps]




This error will prevent you from using prepaid codes on Xbox Live called error XBOS3008.

Xbox error XBOS3008 can be fixed by first checking whether Xbox Live services are operational.

Inactive subscriptions to Xbox Live can also cause the error code XBOS3008.

Most Xbox errors can be solved by clearing your Xbox cache and then restarting the device.

In order to purchase certain content on Xbox Live, you can use a prepaid code on your Xbox. Unfortunately, certain errors can occur while redeeming a prepaid code, and users reported error XBOS3008, so let’s see how to fix it.

How do I fix Xbox error XBOS3008? 1. Check the status of Xbox Live services

In order to redeem codes and make purchases on Xbox Live, all Xbox Live services need to run properly. You can check the status of Xbox Live services simply by visiting Xbox website.

If one of the services isn’t properly running, you might not be able to purchase anything and you’ll encounter XBOS3008 error. Unfortunately, you can’t do anything to fix this problem, and you’ll have to wait until Microsoft fixes the issue.

2. Check the status of your Xbox Live subscription

You should know that prepaid codes can’t be used or activated if your Xbox subscription is suspended or if it has a balance due.

If your subscription is suspended, you’ll need to update your payment information in order to fix this problem.

To do that, follow these steps:

Log in to your Microsoft account using any web browser.

After that, navigate to Services & subscriptions page.

Select the blue question mark under Status and select Pay now link.

If you want, you can also update the payment information on Xbox One. To do that, do the following:

Locate the suspended subscription and select it.

In the Payment and billing section select Pay now option.

Choose how you want to pay and follow the instructions on the screen.

3. Check if you’re using an Xbox Live Gold trial subscription

Xbox Live Gold trial subscriptions will allow you to play games online, but there are certain limitations that you should know about. For example, if you have an Xbox Live Gold trial subscription, you can’t redeem a prepaid code to extend the subscription period.

However, you’ll be able to redeem the code after your current subscription expires. In addition, using an Xbox Live Gold trial subscription will prevent you from accessing Games with Gold.

Another limitation of a trial Xbox Live Gold subscription is that you can’t stack prepaid codes. This means that you can’t start another trial period before your current trial period expires.

You can still use prepaid codes to receive a separate Xbox Live Gold trial subscription, but as we already mentioned, you won’t be able to stack prepaid codes.

4. Delete and re-download your profile

Expert tip:

Press the Guide button on your controller.

Go to Settings and select System Settings.

Select your Gamertag that you want to delete.

Select Delete.

Select Delete Profile Only. (This deletes the profile but leaves saved games and achievements.)

5. Clear the system cache

Clearing the system cache is a general solution that can mainly help with any problem. So, we’re going to try it, as well.

Here’s what you need to do:

Press the Guide button on your controller.

Go to Settings and select System Settings.

Select Storage or Memory.

Highlight any storage device, and then press Y  on your controller.

Select Clear System Cache.

Confirm the action.

Restart your console

6. Power cycle your console

If other solutions don’t work, you might want to perform a factory reset. This option will usually delete all files from your console and reset it to the original state. This means that you’ll delete all your accounts, saved games, settings, and files.

If you want to keep your files, we strongly suggest that you back them up to a USB flash drive before starting the reset process.

To reset your Xbox to factory settings, do the following:

Open the guide by scrolling left on the Home screen.

Select Settings and go to All Settings.

Select Reset console.

You should see two options available: Reset and keep my games & apps and Reset and remove everything.

We suggest that you use the first option since this option will only reset your console and delete potentially corrupted data without deleting games and other large files.

If that option doesn’t work and the problem still persists, be sure to use Reset and remove everything option.

This option will delete all downloaded games, saved games, accounts, and applications, therefore if you want to preserve some of your files, we suggest that you back them up before using this option.

Xbox error XBOS3008 will prevent you from using prepaid codes on Xbox Live, but we hope that you fixed this error by using one of our solutions.

You can either restart from the option available on-screen – Restart this Xbox or press and hold the Xbox button for nearly 10 seconds to turn off the console.

This error code might mean that the update had some issue during installation, and the only way out of it is to update it offline.

Was this page helpful?


Start a conversation

15 Best Gaming Headsets For Xbox One

1. Razer Kraken X

The headphone features the 7.1 surround sound technology that delivers positional audio. And with the bendable noise-canceling microphone, it reduces ambient noise so that you can chat with your buddies without any distraction.

Connection type: Analog 3.5 mm

Buy from Amazon ($89.99)

2. HyperX Cloud Stinger Core

Connection type: Analog 3.5 mm

Buy from Amazon ($37.57)

The headphones feature high-quality drivers that sound pretty decent for playing games or chatting with friends on your Xbox One.

Buy from Amazon ($24.99)

4. Corsair HS50

Buy from Amazon ($49.99)

5. EKSA E900

Buy from Amazon ($45.99)

6. HyperX Cloud Alpha

The HyperX Cloud Alpha makes use of the company’s Dual Chamber technology, delivering crisp highs and deep bass that add up to an amazing listening experience. On top of that, the headphones feature a detachable cable, which is something I feel should be a standard feature in all wired headphones.

Connection type: Analog 3.5 mm

Buy from Amazon ($99.99)

7. Sennheiser GSP 300

The microphone on the GSP 300 is mounted onto a rather large boom arm which can be raised when not in use. Raising the microphone out of the way instantly mutes it, which is a nice touch. The Sennheiser GSP 300 also features intuitive volume controls on the right ear cup, which makes on-the-fly adjustments a breeze.

The only downside of the Sennheiser GSP 300 is that it’s a bit too large and heavy, which means that it won’t be as comfortable to wear for long hours, unlike several other headphones on this list.

Connection type: Analog 3.5 mm

Buy from Amazon ($97.75)

8. Turtle Beach Elite Atlas

The Turtle Beach Elite Atlas also features a detachable noise-cancelling mic with support for the company’s TruSpeak technology for better audio reception. The headphones are also a great choice for gamers who wear glasses as they feature a ProSpecs Glasses Relief System that allows users to create a small channel in the earcups for the glasses to fit through.

Connection type: Analog 3.5 mm

Buy from Amazon ($99.95)

9. SteelSeries Arctis 7

Audio reproduction, both from the drivers and the mic, is top notch and I’m sure you won’t face any problems on that front. The Arctis 7 features a Discord-certified ClearCast microphone which captures studio quality audio and features background noise cancellation.

The headphones make use of a 2.4 GHz wireless connection, which ensures stable, lossless wireless audio with low latency and no interference. In terms of battery life, the Arctis 7 is rated to last up to 24 hours on a single charge, which means that you won’t need to charge often.

Connection type: USB / Wireless

10. Razer Nari ultimate

One of the coolest features that you get with the Nari Ultimate is its haptic fedback, which means that the headphones vibrate in time with the audio. This really makes the headphones stand out as you can literally feel the in-game audio.

Much like the Arctis 7, the Razer Nari Ultimate makes use of a 2.4 GHz wireless connection, with little to no latency and a stable connection. The only shortcoming of the Nari Ultimate is its mic, which is retractable but doesn’t perform as well as the one on the Arctis 7.

Buy from Amazon ($179.99)

11. Razer Thresher

With the help of quick control buttons, you can fine-tune audio without putting your gaming on a halt. Another feature worth taking note of is the 7.1 surround sound that provides immersive sound quality.

Connection type: Analog 3.5 mm / Wireless

Buy from Amazon ($140.44)

12. Logitech G933 Artemis Spectrum

The headphones are rated for up to 12 hours of battery life, which isn’t a whole lot when compared to some other headphones on this list, but it’s good enough for any casual gamer. Additionally, the G933 Artemis Spectrum features completely customizable RGB lighting, swappable backlit custom tages and 3 programmable G-keys for executing macro commands.

Connection type: Analog 3.5 mm / USB / Wireless

Buy from Amazon ($169.99)

13. Astro A50

In terms of design, the Astro A50s are comparable to some of the other premium headphones on this list, featuring a comfortable headband and soft, breathable cushions which will allow you to use the headphones for long hours. The microphone on the A50 is also quite good and it is capable of reproducing your voice quite accurately while filtering out the background noise.

Connection type: USB / Optical Audio cable

Buy from Amazon ($214.99)

14. Victrix Pro AF ANC

The Victrix Pro AF ANC has a very gamery design aesthetic with a black and purple color scheme that looks fantastic. The active noise cancellation technology make it a perfect pair for eSports enthusiasts as it drowns out 70 percent of the background noise, allowing you to focus on your game.

Connection type: Analog 3.5 mm

Buy from Amazon ($299.99)

15. LucidSound LS35X

The headphones come with a wireless connectivity option, but you can also use it with its 3.5 mm analog connection or an optical connection. The design of the headphone is remarkably comfortable and it doesn’t clamp down on your head with too much force, which is great for long hours of use. However, because of the loose fit, the headphones don’t do a great job of isolating background noise, so they aren’t an ideal option for noise environments.

Connection type: Analog 3.5 mm / Optical cable / Wireless

Buy from Amazon ($147.99)

How To Set Up Port Forwarding For Xbox Series And Xbox One?

You can set up port forwarding for Xbox Series and Xbox One to open up your multiplayer experience. We’re guiding you step by step through the process.

This is a beginner’s guide, but it would be best for you to have some prior technical knowledge. Also, we do not recommend port forwarding the Xbox if you don’t need to. So, the initial step is verifying you actually need to do it.

To finish the introduction, we should say the tutorial works equally for Xbox Series and Xbox One.

But if you want a quick answer…

What Ports to Open for Xbox Series X?

Perhaps you already know the steps for port forwarding the Xbox, the PlayStation, a Windows PC, or other devices. It’s similñar for either option.

So, if you want to do it quickly, here’re the ports you can use for an Xbox port forwarding rule: 

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 3544 (UDP)

Port 80 (TCP)

Port 500 (UDP)

Port 4500 (UDP)

Port 88 (UDP)

These are the ports you’d choose when adding a virtual server, port forwarding rules, or similar for your Xbox.

If you don’t know what we’re talking about, follow the complete tutorial.

How to Set Up Port Forwarding for Xbox?

The Xbox port forwarding tutorial has five general steps:

Understanding NAT Type: The NAT Type configuration comes with the router. “Port forwarding” a device through the router’s admin page allows you to change the Type. 

Adding a static IP to your Xbox: You need a static IP, an address that won’t change, to use on your port forwarding rules. 

Accessing your router or gateway admin page: Port forwarding the Xbox requires accessing the router or gateway admin page. In case you don’t know how to do it, we’re showing you how.

Enabling UPnP on the router: The Universal Plug and Play feature is required to open up the ports. Specifically, it allows network devices to create port forwarding rules. 

Opening a port on your router: You redirect a specific device to specific ports. In this case, the Xbox console will use particular Microsoft network ports. It allows your console to communicate with the Xbox’s network servers. 

Understanding NAT Type

Network Address Translation (NAT) is how a router or gateway translates public IPs into private IPs and vice-versa.

For example, it takes the private IP address of your Xbox and sends it as a public IP to the network so others can share it with you.

There’re three NAT categories, which are innate to the router/gateway and your internet service provider. The category determines how your devices can interact with other devices on other networks: 

NAT TypeOpenModerateStrict




For instance, if your NAT Type is Open, you’ll be able to play and share with any other Xbox, regardless of their NAT Type. But if your NAT is Strict, you’d only be able to communicate with Open configurations. That’s why it’s a limiting feature.

Port forwarding generally changes NAT Type to Open, as it’s the default configuration for Microsoft’s ports. It’s the option we recommend, as it can communicate with Open and Moderate settings, but not Strict.

Testing Your NAT Type Configuration

Let’s check your Xbox’s NAT Type configuration. Port forwarding the Xbox will change the NAT Type, but you don’t always need to change it.

Turn on your Xbox

Press the Xbox button to open the guide

Go to Profile & system

Go to Settings

Go to General

Select Network Settings

Under Current Network Status, check your NAT Type. You can also select Test NAT Type on the right to verify.

If the result is NAT Type 1 (Open) or NAT Type 2 (Moderate), you don’t need to do anything. If the result is NAT Type 3 (Strict), proceed with the tutorial.

The latter is a limiting option that will damage online features such as game chats, online gaming, and streaming. 

Lastly, you’d see a related error on the Network screen: “Double NAT detected.” Ensure you’re not getting it before going through the following process.

Adding a Static IP to Your Xbox

Either via WiFi or ethernet cable, the gateway, modem, or router will assign a dynamic IP address to the console and any other device every time they log in.

Dynamic addresses change every time, so they don’t repeat each other. However, we need to add a static IP, as we need the specific number to use when we add port forwarding rules.

Here’s how to add a static IP address on your Xbox One or Xbox Series.

If the connection doesn’t work, ensure that you only changed the last number on the IP. You can set back the IP in automatic mode, write it down again, and try again.

But then, add 50 to the last digit rather than 100. You can add any number between 50 to 100 until it works. Typically, though, it will work the first time.

In any case, a static IP may improve your Xbox’s connection quality and download speeds.

Accessing Your Router or Gateway Admin Page

If your network has a custom name and password, you or someone else in your household has already accessed the router’s admin page.

You can change the network’s default name and password from the page and configure other sensitive options.

If you have already accessed it, you can skip this section. If you haven’t, but your network uses a custom password and name (rather than the default name and password), you have two options:

Ask the person who created the password for the admin password.

Reset the router or gateway. You can use a pin to push and hold the reset button for about 10 seconds. It’s typically on a small hole in the rear or sides of the device.

If the network uses default settings (like the brand’s name plus a long and convoluted password), here’s what you do:

If you push the device’s reset button, it will reset the device to default, which means you can access it with the default admin and password you’d find on the back of the router.

Regardless, once you navigate to the site, you’ll find a page like this one. You can press login to access the router.

Enabling UPnP on the Router

Every router brand has a different interface, options, and features for its admin page. It means I can’t guide you exactly on what you need to do or where to find the options you want.

However, every router has UPnP, as well as port forwarding rules. However, you may find the latter with a different name.

However, you’d find the option on a very similar menu like this one:

Opening a Port on Your Router

The last step is the Xbox port forwarding itself. It’s also known as adding virtual servers or port forwarding rules. As you’d expect, it works within the router’s admin page.

Essentially, it changes the NAT Type configuration by allowing your console to bypass the router’s firewall. As a result, it will communicate with the Xbox server ports successfully. 

The option is near the UPnP settings. You’d find it as:

Port Forwarding

Virtual Servers

Port Forwarding Rules

Virtual Server Rules


Advanced Applications

Apps & Gaming

Port Range Forwarding

NAT Forwarding

Port Triggering

Let’s see exactly how to do it. Remember, my tutorial follows my specific brand, but you’ll find very similar options: 

These are the ones Microsoft recommends. You must choose the same number for both. Also, because some are UPD and others are TCP, we recommend leaving the Protocol as “All” to avoid issues.

Lastly, remember to Save after you type the information.

Afterward, you can exit the router’s admin page. You’re done with the tutorial.

What’s Next?

You can go back to your Xbox’s network settings and check your NAT Type, as I explained above. You successfully set up port forwarding for Xbox if it’s Open or Moderate rather than Strict.

Otherwise, erase the port forwarding rule / virtual server you added, and place a new one with another port. You can also change the Protocol to something that fits your selection for the new trial.

Update the detailed information about Troubleshooting Xbox One Error 0X800704Cf on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!