Trending December 2023 # The Best Windows Settings To Optimize Your Blue Yeti Mic # Suggested January 2024 # Top 20 Popular

You are reading the article The Best Windows Settings To Optimize Your Blue Yeti Mic updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 The Best Windows Settings To Optimize Your Blue Yeti Mic

The Best Windows Settings to Optimize your Blue Yeti Mic Apply these easy tips to get maximum from Blue Yeti microphones




For flexibility and excellent useful features availability, the Blue Yeti microphones have become the best choice among most types of users, including streamers, Youtubers, podcasters, etc.

However, improper settings may lead to poor performance problems from a decent mic.

To get the best, you can enable noise reduction and audio enhancements and apply these best Windows settings for Blue Yeti mentioned in this article.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

If you want to know about the best Windows settings for Blue Yeti microphones, this article is for you. Here, you will get the best step-by-step instructions along with some crucial information.

What makes a microphone performs better on a Windows PC? Of course, quality plays a significant role. But, the configuration is the key. There are several high-quality mics available on the market. But, among them, the Blue Yeti is the most popular due to its excellent performance.

Blue Yeti features:

There is no magic behind the success of this USB microphone. The Blue Yeti mic has both pros and cons. It has the features that most users, streamers, and podcasters need. These are:

Multiple patterns: Unlike many other typical professional mics, Blue Yeti supports multiple pattern modes, including cardioid, stereo, omnidirectional and bidirectional modes. It gives a lot of flexibility to any type of user. 

Control: Volume, pattern selection, instant mute, sensitivity, etc., are easily controllable on this microphone.

Unique design: Yeti has a very positionable design that makes it easier to record comfortably. By using better mic stands, the BY can fit in an even better way.

Plug and play: This USB mic doesn’t need a special tool. You can plug on a PC or Mac and start using it.

If you get unexpected or stunning performance, from this mic, in most cases, it is because of the settings or configuration.

What are the factors that can impact microphone performance?

The following things have a direct impact on Blue Yeti’s performance:

Driver: Though you won’t need a separate driver for plug-and-play mics, sometimes, the problematic driver can affect the microphone performance.

System resources: The capability of PC hardware and other system resources also impact mic performance.

Software: You don’t need software to use a mic. But, there are various tools to enhance microphone performance. If the software has a problem, the opposite may happen.

Settings: This is the biggest factor that no one can deny. Faulty settings can bring down a decent microphone performance to the ground. A better setting can boost a typical mic’s performance.

How to apply the best Windows settings for Blue Yeti?

We have found the best settings that work great with the Blue Yeti microphone. Before applying it, we suggest you do the following things first:

Make sure Windows is up to date.

If you use audio software that runs in the background and can tweak your microphone and sound quality, disable it.

Adjust your gain and pattern mode using the selector knobs on your microphone.

Now, follow these steps to gain optimal Blue Yeti performance:

1. Adjust the volume

Expert tip:

2. Change input quality

From the Microphone settings, find Format in the Input settings section.

Change it to the highest quality.

You will find various studio quality options. Choose the one 16 Bit with 48000 Hz or anything better.

3. Disable AGC 4. Enable audio enhancement 5. Adjust voice mode

Go and download Logitech G HUB software.

Select the Blue Yeti microphone when it detects the mic automatically.

Enable Blue Voice.

If necessary, choose a preset or manually adjust it according to your need.

To get the best from this mic, from Equalizer, enable High-Pass and set it to 100 Hz or anything ideal for you.

Set Master Output Level to 95 or anything you prefer.

Adjust the Voice EQ according to your needs.

Enable Noise reduction from the Signal Cleanup tab.

Set noise reduction level to around 25.

You can modify the settings according to your own preferences. We are recommending what works well for most users.

If you don’t see the mic after opening this software, learn how to solve Logitech G Hub not detecting Blue Yet.

6. Enable NVIDIA Broadcast

On Logitech G Hub for Blue Yeti, go to the NVIDIA tab.

Enable NVIDIA Broadcast.

You can set Noise Removal to around 60.

These settings will work for most of you. Keep in mind that Blue Yeti has discontinued its software. So, the Logitech G Hub is the officially recommended one. So, we have featured it in our article.

If you are interested, you can check out these best wireless microphones.

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

You're reading The Best Windows Settings To Optimize Your Blue Yeti Mic

How To Adjust Your Autoplay Settings In Windows 10

Few features in Windows have as colored a history as AutoPlay. In its early days, the setting was infamous for passing viruses from errant USB drives to PCs. In more recent versions of Windows, AutoPlay is off by default to prevent malicious files from automatically executing on a PC.

AutoPlay is handy because it tells Windows to automatically carry out a specific action when you plug in some kind of removable media such as an SD card, a USB drive, or an external CD player. AutoPlay can be set to automatically import photos or videos, play any media, open File Explorer, or do nothing at all.

Even in the age of Windows 10, the best practice for AutoPlay is to leave it off or to have it ask you what to do every time you insert a device. If that doesn’t work for you, the next most benign step you can take is to set AutoPlay to open File Explorer. That way you can still see what’s on the USB stick, which is probably an action you would’ve taken anyway.

Here’s how it works in Windows 10. This example uses the Anniversary Update, but previous iterations offer similar settings.

This section may change depending on your machine’s configuration. On my laptop I have options to decide what to do with a USB removable drive (flash drive, external hard drive, etc.) and a memory card.

In our example, we’re setting each option to open the files in File Explorer for immediate viewing. To do that, select each drop-down menu and choose Open folder to view files (File Explorer). If you’d rather open File Explorer yourself, choose the Take no action option.

AutoPlay settings in the Control Panel in Windows 10 (Anniversary Update).

Next, set the View by option in the control panel to Large icons. Then select AutoPlay at the top of the window. From here you can tell Windows to do specific things based on the type of media and the files it has.

For example, you can tell a removable drive to automatically import photos but take no action for videos. There are numerous options you can set using Control Panel, but again it’s important to understand that using AutoPlay at all can be an easy way to end up with an infected PC.

Of course, there’s more to USB security than just disabling AutoPlay. Check out Stack Exchange for a short discussion about threats from external media beyond using AutoPlay. The most important thing to know is that you should never plug a USB device into your computer if you don’t trust it or don’t know where it came from.

Even if you do trust a USB device (such as one that you own), you still may not be able to treat it as safe, depending on where it’s been. If you used a personal USB drive at work and then brought it home to insert in your personal machine, watch out. You never know what kinds of horrible things are lurking in corporate networks, your local internet cafe, or even your friend’s house. 

The Best Settings To Use For Scrcpy

If you are using SCRCPY and would like to have a more efficient user experience with the best possible audio and video quality. This guide will take you through all the steps and changes you need to make in order to configure SCRCPY to run at peak quality and performance.

Related: Make sure you check out all of our SCRCPY Guides.

With SCRCPY 2.0 and higher it’s now possible to fine-tune everything to get the best possible audio, video and quality-of-life experience so follow along as we guide you through the best possible configuration you can use in SCRCPY. Keep in mind this is a little bit subjective but most people will find these configurations optimal. That said, it is also fully customisable so you can tweak things to work for your specific device/s.

One of the main features of SCRCPY that makes it so good is that you can pick and choose the commands you want to run at any given time. This means you can set SCRCPY to run on low-end machines, high-end machines, with high-screen resolutions, low-screen resolutions, with audio, without audio, etc. You can also create multiple shortcuts that open different configurations of SCRCPY. Check out our guide on using commands in SCRCPY and our guide on creating custom shortcuts (batch files) in SCRCPY.

In order to get the best possible settings for SCRCPY you’ll need to do the following.

Open Command Prompt on Windows, press the Windows key + R to open the Run tool. Type “cmd” and hit Enter.

Next, navigate to SCRCPY Directory by doing the following. Type “cd” followed by the path to the SCRCPY directory. For example, if SCRCPY is installed in the C drive on Windows, you can type “C:SCRCPYscrcpy-win64-v2.0”.

Once you have pointed Command Prompt to the correct location type one of the following commands.

Extreme Quality

scrcpy –turn-screen-off –disable-screensaver –show-touches –stay-awake –video-codec=h265 –video-bit-rate=16M –audio-bit-rate=256K –max-fps=144

Extreme quality with a more stable Video Codec

scrcpy –turn-screen-off –disable-screensaver –show-touches –stay-awake –video-codec=h264 –video-bit-rate=16M –audio-bit-rate=256K –max-fps=144

High Quality

scrcpy –turn-screen-off –disable-screensaver –show-touches –stay-awake –video-codec=h265 –video-bit-rate=16M –audio-bit-rate=256K –max-fps=144

High quality with a more stable Video Codec

scrcpy –turn-screen-off –disable-screensaver –show-touches –stay-awake –video-codec=h264 –video-bit-rate=16M –audio-bit-rate=128K –max-fps=6

This command will use the default H.264 Video Codec (more widely accepted on Android devices)

NOTE: With all of the above commands feel free to remove –show-touches from the command list if you don’t want to show touches on your screen. You can also add or remove any of the other commands as well if you like.

If everything works, you can now proceed to create a Custom Batch file shortcut that will allow you to open SCRCPY with these settings without having to open command prompt each and every time. You can even place the shortcut on your Desktop for quick access.

The Best Vpn Settings For Android

If you’re running a VPN on your Android phone, you’re likely doing so because you want your browsing data to be as private and secure as possible. As such you want a VPN with the best available settings. It can be difficult to know and understand which settings are really important, so we’ve rounded up a list of the best VPN settings for Android and explain what they do.

Encryption and VPN protocol

The two most important settings involved in keeping your VPN connection secure are the VPN protocol and the encryption algorithm.

The best VPN protocol you can use is OpenVPN, it is the standard VPN protocol because it supports the best available encryption and is a well-developed protocol. Two other VPN protocols that offer equivalent security levels but haven’t been as thoroughly analysed yet are Catapult Hydra and WireGuard. Where possible, you should avoid the VPN protocols PPTP and L2TP as they are both old and have weak security.

256-bit refers to the size of the encryption key and the number of possible values it can have. 256-bit can also be written as 2^256 or 2 multiplied by itself 256 times. If the total number of possible encryption keys was written out in full it would start with a 1 and have 77 zeroes after it, to put that number in perspective, scientists believe this is roughly equivalent to the number of atoms in the observable universe. Even if you had dedicated access to supercomputers for centuries, you’d still not be likely to break AES.

The WireGuard protocol uses a different cipher suite, ChaCha20 to perform its encryption. ChaCha20 is equivalent in strength to 256-bit AES while being even faster to process, however, it is also newer and less thoroughly researched.

One final encryption option is PFS or Perfect Forward Secrecy. PFS is a setting that regularly changes the encryption key being used. This means that if your encryption key was ever compromised, it would only be able to decrypt a small amount of data. There is no reason not to use PFS if it is available.

Kill switch

A VPN kill switch is used to cut the internet connection of your device if it detects that it has disconnected from the internet. This protects you from having all of your browsing data leak from your VPN if you don’t notice that it has disconnected.

A VPN kill switch can be useful for everyone but is especially useful for mobile devices that can regularly switch networks which increases the risk of VPN connection issues.

Leak prevention

A VPN kill switch prevents a general leak of data, however, there are a few protocols that have a history of leaking information that could be used to identify you or track your activity. The main culprits are IPv6, DNS, and WebRTC.

IPv6 is an update to the IPv4 address scheme used to uniquely address all devices on the internet. IPv4 has now essentially run out of available IP addresses, nearly all 4.3 billion IPv4 addresses have been assigned. As such it’s necessary to switch over to the new addressing scheme which has a much larger address space. IPv6 uptake however has been slow, and many services and even ISPs don’t support it.

DNS or Domain Name System is the protocol used to translate human-readable URLs to the IP address of the server. Disappointingly, VPNs have a history of allowing DNS requests to leak out of the VPN connection. DNS is a plaintext protocol, meaning it’s not encrypted. This means that even if you change your preferred DNS server, away from your ISP provided one, your ISP can still read and track what websites you’re browsing to via your DNS traffic.

How To Optimize Your Site To Collect The Most Email Addresses

Amazing, isn’t it? In spite of being pronounced dead more than once, email continues to drive the biggest growth for online stores and businesses alike.

Heck, it actually seems to be performing better and better every year.

The latest data published here on Smart Insights at the start of January proves that currently, email delivers approx. 30 times higher ROI than other channels. Plus, a staggering 95% of people rate it “important” or even “very important” to their organization.

Download Premium Resource – Email Marketing Audit

Benchmark to identify areas to improve in your email marketing.

Access the Email marketing audit

The catch? To generate similar results, you need to build a strong and vibrant list first.

And the problem isn’t how to capture those more emails.

It’s how to do it with so many visitors landing and exiting the site through different pages. And what goes with it, exhibiting a variety of intents for their visit.

In this post, I’ll show you how to overcome this. You’ll learn how to collect email addresses on different sections of your site:

The homepage,

About page,


Sitewide calls to action.

Intrigued? Let’s begin.

1. The Homepage

A blog aims to attract and convert potential customers who are early in the customer’s journey. Product pages focus on communicating the value of what you sell.

The homepage, however, has to do it all and more.

For one, it introduces visitors to your brand, positions you as an authority too, and finally, entices them to engage with you.

How to convert visitors on the home page?

Use a dedicated call to action, embedded on the page itself.

For example:

A dedicated call-to-action that takes the user to a dedicated sign-up page.

An entire form embedded within the homepage

Why embedded Call-to-actions works so well on the homepage?

For one, because it doesn’t interrupt the first-time visitor’s experience. The call to action doesn’t jump out at them or cut into their flow through the page.

Instead, it lets them go through the page naturally, at their page, and discover your offer as an integral section of the experience.

2. The About Page

It’s hard to imagine that the inconspicuous about page could actually be of any significance, isn’t it?

And yet, once landed on a company’s website, as many as 52% of visitors want to see its about page.

Now, I admit, just over half of visitors might not seem that impressive. However, I think we can safely assume that most of those people aren’t your current customers or casual browsers. In fact, they mostly comprise of people considering doing business with your company.

That’s exactly the reason why they turned to that page – to learn more about you and your brand.

And what goes with it, they present a great opportunity to convert to your email list.

Lead generation on the about page requires subtlety. Remember, your main goal for this page is to develop a personal connection with visitors, confirm your authority and convince them that you can help.

And needless to say, any aggressive lead generation strategy might overshadow those objectives.

Therefore, your best option is to use either a sidebar banner or a small popup showing in a less strategic location on the screen, – at the bottom or on a side.

Let’s go through them in more detail.

1. Sidebar banner

As the name suggests, this call to action resides in the sidebar column of the page, and typically contains a visual or contrasting color to attract a person’s attention.

Here’s one example of an About Page displaying sidebar banner. In this case, using a free course to entice more signups.

Luckily, the other call to action helps overcome this challenge perfectly.

2. Email Popup

I admit that popups have caused a bit of a stir among marketers. Some openly discount them while others praise their effectiveness.

Nonetheless, the fact remains that email popups are the highest converting call to action, ever.

For example, our customers typically collect 270% more emails with popups, and their average conversion rate exceeds 5%.

Exit popups, another email popup type, we’ll discuss later often convert at 7% or more.

In contrast, sidebar banners generate roughly 0.5% 1.5% conversion rate. Sliders and bars attract about 1% of signups.

Impressive, right?

Here are some examples of popups on the About page:

Why popups work so well?

For one, because they give you full control over when and for whom they display.

Most popup platforms allow you to specify timing and choose specific visitor-types to display the most relevant offer to them.

For example, you could show a more generic offer to first-time visitors, since you don’t know anything about their preferences yet.

At the same time, people who have seen your website before could see highly-relevant offer – a discount code or a specific lead magnet, greatly increasing their chances for conversion.

3. Blog

The blog is the foundation of the entire inbound methodology.

Every post you publish aims to attract relevant visitors that you could, in turn, convert into subscribers, and later, customers.

Couple that with the fact that between all your articles, blog receives the greatest number of visits, and you know why you should focus list building efforts on it.

To capture email signups from the blog, use the following calls to action:

1. Under the Post Banners

Have you noticed that most blog posts end with an offer, prompting you to sign up with your email to retrieve it?

Offers like these, for example:

Why under-the-post calls to action work?

Because they place your offer as a natural extension of the value your content has already provided.

A person who has just finished reading an insightful and helpful content from you might be naturally inclined to want more information. A banner, strategically placed at the end of the information provides them with an opportunity to get it.

2. Exit Popups

We’ve talked about email popups already. And this call to action is their variation that uses an exit-intent technology to identify when a person aims to leave the site and trigger a popup at that moment.

Here’s how this process works in practice:

The purpose of this popup type is to deter or prevent a person from leaving the site without engaging with your brand.

Exit popups typically feature relevant copy, targeting the person’s intent to leave. For example:

Source: PixelMe

Why do exit popups work?

The main reason is relevancy. By targeting a specific behavior, you can present exiting visitors with an enticing offer that engages them with your brand.

3. Inline content upgrade

Finally, you can also place calls to action inside your blog posts. In this case, these call-to-actions offer a specific lead magnet called a content upgrade.

Here’s how they look:

Why inline links to content upgrades work?

Inline links’ main power lies in the information they offer. The idea behind content upgrades is that they provide additional and exclusive material for the content a person is already reading.

Assuming it provides them with value, there’s huge chance that they’ll also want the additional information.

4. Sitewide

We’ve discussed converting visitors on every major section of a website. But what about converting all visitors, regardless of the page they’re on? Luckily there are calls to action that help with collecting emails site wide. And the most effective of them include popups, slide-ins, and bars.

1. Email Popups

We’ve talked about email popups already. And just like they help to convert visitors on the About page, you could also use them sitewide.

However, I always recommend that you use more than one popup to target different visitors with offers that are relevant to them.

2. Bars

Bars are permanent calls to action that reside either at the top or bottom of the screen, separately from the website. This means that they remain visible regardless of a page a person’s viewing.

For example, when viewing this site, you see this bar:

3. Slide-ins

Finally, slide-ins are similar to popups. The major difference between them is how they appear. And as the name suggests, they simply slide out from the side of the screen, presenting the marketing message in full. For example:

Why these calls to action work so well on the site?

To understand their effectiveness, we need to look at their common characteristic – each of those call-to-actions resides outside of the site and show up depending on a person’s behavior or interaction with the content.

As a result, they can deliver the most targeted message when visitors are the most susceptible to it.

Wrapping Up

Email continues to drive the biggest growth for online stores and businesses alike. However, to fully avail of its potential, you first need to ensure you’ve optimized every section of the site to collect the most email addresses.

Hopefully, after reading this guide, you have a good idea what calls to action to use and where.

Download our new Business Member Resource –Email Marketing and Marketing Automation Buyers Guide

This guide is for senior marketing managers and email marketing managers who are using, selecting or reviewing email marketing service providers and marketing automation platforms.

Access the Email marketing and marketing automation buyer’s guide

How To Clean Up And Optimize Your WordPress Database

Let’s take a look at one of the easiest ways to clean up and optimize your WordPress database.

1. Although there are quite a few plugins available for this, we’re going to use the WP Clean Up plugin. From your blog dashboard, go to “Add New Plugin” and search for WP Clean Up.

2. After you’ve installed and activated the plugin, you’ll find it’s settings under your Settings menu.

4. Go through each one and delete the items that you want to get rid of. Alternately, you can just use the “Delete All” button.

6. Once completed, if there was any optimization that could be done then you’ll know from the total KB number – it will be smaller.

You’ve just cleaned and optimized your WordPress database. Wasn’t that easy?

Charnita Fance

Charnita has been a Freelance Writer & Professional Blogger since 2008. As an early adopter she loves trying out new apps and services. As a Windows, Mac, Linux and iOS user, she has a great love for bleeding edge technology. You can connect with her on Facebook, Twitter, Google+, and LinkedIn.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Update the detailed information about The Best Windows Settings To Optimize Your Blue Yeti Mic on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!