Trending December 2023 # Mapped Drive Not Showing? Here’s How To Fix It # Suggested January 2024 # Top 16 Popular

You are reading the article Mapped Drive Not Showing? Here’s How To Fix It updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Mapped Drive Not Showing? Here’s How To Fix It

Mapped Drives are great options to link a folder to a drive or share resources on a domain. However, in some scenarios, they may not show up. Most people have encountered this issue while using Group Policy Preferences or logon scripts to create mapped drives if UAC is enabled.

The reason for the issue is how the UAC treats your Administrators user group. If you use an elevated process to create the drive, your system only makes it available to full admin users. However, when UAC is enabled, your system treats the Admin user as a standard user only, unless you are using an elevated process.

The methods we mentioned earlier all use elevated processes to create the mapped drives, so they don’t show up in your explorer, which you can’t run as admin by default. Similarly, mapped drives you create from non-admin methods don’t show up in elevated processes.

There are also other few possible reasons for mapped drives not showing. In this article, we provide the solutions for all the causes of the issue.

Here are the main reasons for mapped drives not showing on your PC:

Design issue due to UAC providing standard access token instead of an administrator token to unelevated process.

Mapping drive with the same letter as a previous persistent one without removing its residual settings.

Multiple drive mapping policies that conflict with each other.

Policies that delete mapped drives running alongside policies that create them.

Improper Item-level targeting configuration.

SMB protocol disabled on your system.

First, make sure to run gpupdate /force on Command Prompt to force the group policy to apply. You can also run the gpresult /r command to check all active policies.

If you still encounter this issue, you can try out the following solutions:

Sometimes, the mapped drive doesn’t show on your File explorer. It happens in the following conditions:

You created the drive in admin mode, for example using a batch script as admin or using any app with elevated privilege.

You have enabled User Account Control (UAC).

As we mentioned earlier, this happens because UAC handles the Administrators as standard users on unelevated processes. So, you can’t see the mapped drive on File explorer.

You can temporarily resolve this issue by restarting Windows Explorer. To do so,

This method is also useful if you created the mapped drives using a standard access token (not elevated) and want to access it from elevated processes like CMD or some apps. However, keep in mind it can compromise the security of the user computers.

Regardless, here’s what you need to do:

Restart your PC and check if the mapped drives show up.

Another method you can apply is using the logon scripts while also including a postpone script provided by Microsoft.

The script runs a task scheduler after a certain amount of time has passed since the user logged in. The task scheduler runs on elevated mode so it creates the mapped drive for elevated processes.

However, even before the scheduler runs, the logon script is automatically triggered right after logging in which makes the mapped drive available to standard users.

Here’s the complete process for the method:

Open a text editor like notepad. You can enter notepad on Run to open this text editor.

Copy and Paste the following script provided by Microsoft:

‘ This sample launches the application as interactive user. ‘ A constant that specifies a registration trigger. const TriggerTypeRegistration = 7 ‘ A constant that specifies an executable action. const ActionTypeExecutable = 0 ‘ A constant that specifies the flag in RegisterTaskDefinition. const FlagTaskCreate = 2 ‘ A constant that specifies an executable action. const LogonTypeInteractive = 3 WScript.Quit End If strAppPath = WScript.Arguments(0) ‘******************************************************** ‘ Create the TaskService object. ‘******************************************************** Set service = CreateObject(“Schedule.Service”) call service.Connect() strTaskName = “Launch App As Interactive User” ‘******************************************************** ‘ Get a folder to create a task definition in. ‘******************************************************** Dim rootFolder Set rootFolder = service.GetFolder(“”) ‘Delete the task if already present On Error Resume Next call rootFolder.DeleteTask(strTaskName, 0) Err.Clear ‘******************************************************** ‘ Create the new task ‘******************************************************** Dim taskDefinition Set taskDefinition = service.NewTask(0) ‘******************************************************** ‘ Create a registration trigger. ‘******************************************************** Dim triggers Set triggers = taskDefinition.Triggers Dim trigger Set trigger = triggers.Create(TriggerTypeRegistration) ‘*********************************************************** ‘ Create the action for the task to execute. ‘*********************************************************** ‘ Add an action to the task. The action executes the app. Dim Action Set Action = taskDefinition.Actions.Create( ActionTypeExecutable ) Action.Path = strAppPath WScript.Echo “Task definition created. About to submit the task…” ‘*********************************************************** ‘ Register (create) the task. ‘*********************************************************** call rootFolder.RegisterTaskDefinition( _ strTaskName, taskDefinition, FlagTaskCreate, _ ,, LogonTypeInteractive) WScript.Echo “Task submitted.”

net use Z: /delete net use Z: "\serverAny Server"

The mapped drive also doesn’t show if you haven’t properly removed another drive with the same drive letter. It can happen if you persistently reserved the drive letter for one mapped drive and remove it improperly. So its residual settings still remain causing conflicts with the new mapped drive.

There are two ways to resolve this issue. You can either change the mapped drive to a separate drive letter or you can delete the residual settings of the previous mapping.

To change the drive letter,

To delete residual settings,

It is also possible that you created a logon script or policy to delete all mapped drives and forgot. Or you may have created more than one drive mapping policy that are overwriting each other.

So, you should go through all the policies for the GPO and remove such policies. The best way to set a group policy for mapping network drives is to tailor individual policies for separate OUs which combine all the mapped drive policies.

It’s better to use Item-level targetting on the drive mapping to set conditions and improve organization. You can use the AND, OR, IS, and IS NOT operators to set the conditions.

If you set a wrong operator, for instance, using AND instead of OR, the mapped drive won’t be available to all users or all of the mapped drive may not be available.

You need to check your Item-level targeting settings to resolve this issue. To do so,

You can also try creating a new policy, but not on the default domain. You should always create new GPOs and link them to the necessary targets while creating policies. Here’s how you can do so:

You can also try setting automatic DNS if you can’t see a mapped drive linking to a network resource. If the DNS servers or IP configuration of your system conflicts with the source computer, you may nor see the drive.

To do so,

Mapped drives use the Service Message Block (SMB) protocol, which is a network protocol that helps in file sharing. So you need to make sure to enable this protocol to prevent any issues with the mapped drives.

The latest Windows use SMB2 instead of the older SMB 1.0, so you need to check for it. Here’s how you can do so,

However, if you are using any Windows earlier than Windows 10 version 1709 or Windows Server version 1709, you need to enable SMB 1.0. To do so,

It is also possible that some buggy update is causing problems with your mapped drives. Microsoft will surely release the patches for such bugs, so you should install any updates as soon as they are available, especially cumulative updates.

If you started encountering this issue after a certain update and the previous solutions didn’t help, uninstall the latest update to roll back your system.

You're reading Mapped Drive Not Showing? Here’s How To Fix It

Seagate External Hard Drive Not Working? Here’s How To Fix It.

External hard drives are great portable storage devices with one huge downside. That is, sometimes the drive just does not show up. If you are on Windows 10 and have a Seagate external hard drive, you may already have faced this issue.

We say Windows 10 because it specifically does not support Seagate’s external hard drive. Besides this, there may also be many reasons your external hard drive is not working.

Today in this article, we have brought you a few solutions to fix the problem of Seagate’s external hard drive not working.

As also mentioned on Microsoft’s Official forum, Seagate’s external hard drive will not be not compatible with Windows 10 if you have recently upgraded from an earlier version of Windows. However, there can also be numerous reasons your PC does not detect a hard drive.

Hard drive not compatible with the current version of Windows

Damaged USB header on the motherboard

An issue with the USB port

Faulty hard drive cable

Physical damage to external hard drive

Outdated Windows

Outdated disk driver

Before jumping into the solutions, you need to know what’s wrong with your external hard drive. Here are a few things you can do to check whether the issue is software-related or with the hard drive.

Listen to audio cues when you insert the USB.

Search for any visible damages to the cable and the hard drive itself.

Check if the Seagate hard drive shows up on This PC.

Without further delay, let us get into the methods to fix an external hard drive.

If you have recently upgraded to Windows 10, it may not detect Seagate’s external hard drive right away. To solve this exact issue, Windows has a utility named Troubleshooter. Or more specifically, Hardware and Devices Troubleshooter.

Hardware and Device Troubleshooter checks and tries to solve any issues with the connected hardware.

Please follow these steps to run the Hardware and Device Troubleshooter.

Once the hardware and connection-related issue has been omitted, try out the next fix to troubleshoot the issue.

Since the problem generally arises due to compatibility issues, you can install the driver itself in compatibility mode to see if it solves the problem. First, download Paragon driver for your Seagate external hard drive

Once downloaded, please follow the steps mentioned below.

Another simple fix can be to assign a drive letter from Disk Management. If your computer detects the hard drive, but you cannot access it, It could be very likely that the OS has not assigned a drive letter to it.

To fix this, you simply need to assign a drive letter from Disk Management. Below are the steps mentioned to do so:

Any damages to the cables may also be stopping the external hard drive from being detected. So, if you see that the cables are broken, it is ideal that you change them right away.

However, if the USB port is not working, we have an article that may help you address the issue.

Windows OS has a special feature named USB Selective Suspend. This stops power supply to any unused USB port to save battery. Due to this, a USB port sometimes does not work although connected with a USB device.

We can try disabling USB selective suspend from Power options to see if it fixes the issue with Seagate or any other external hard drive.

Please follow these steps to disable USB Selective Suspend.

Now, try connecting the external drive to see if it fixed the issue.

When you connect an external hard drive to your computer, the OS determines which driver it should use to communicate with the device. Once connected, you can see a device on Device Manager.

If this new driver is outdated, you may face issues like the OS not detecting the device. Updating this driver will fix it if you encounter this issue.

If this does not fix the issue, try updating your USB drives. Since we connect external drives to the USB port itself, outdated USB drivers might be the reason behind an undetected external hard drive.

If updating these drivers does not work, you can try updating the chipset drivers. The chipset driver provides instruction that helps Windows properly communicate with the motherboard.

Along with this, it also makes sure that the motherboard is connected to all peripheral devices. Therefore, updating the chipset driver is very imperative.

To update the chipset driver:

Another reason Seagate’s external hard drive is not working might be that the USB connector that connects the USB port to your motherboard might be damaged.

Follow these steps mentioned below to check the motherboard’s USB connectors.

Remove the side panel from the motherboard.

Once removed, you can now access the motherboard.

Using the motherboard’s user manual, search for USB headers named USB1, USB2, JUSB1, JUSB2, etc., depending on your motherboard.

Now, remove the cable from the CPU’s USB port and check for bent pins. If you find any, try connecting the USB connector to another USB header on your motherboard.

Now, assemble everything and try using the external hard drive again to see if it fixes the issue.

Your Operating System and device need to communicate flawlessly, which is not possible if you have an outdated OS. This can cause issues such as Windows not detecting hardware or, in this case, external hard drives.

Please follow the steps mentioned below to update Windows to the latest version.

Try connecting the external hard disk once again to see if the updating of Windows fixed the issue.

If your PC stops detecting the external hard disk after a Windows update, it is recommended that you roll back Windows to the previous stable version.

Sometimes, when you have OneDrive linked to your Windows, it may stop hard drives from being detected. If this is the case for you, you can try disabling Microsoft’s OneDrive.

Please follow these steps to disable OneDrive.

If this method works as a fix for your issue, you may also want to view a detailed article on Removing or Disabling OneDrive for good.

If nothing works, you can try formatting Seagate external hard drive. However, formatting the drive will delete all its content permanently. This can be a huge risk since formatting may or may not work on fixing a drive.

If you are sure you do not have any useful data on your drive, you can try formatting it.

Here is how you can do so:

Most hard drives are preformatted to NTFS since it offers greater transfer speed. However, this file system is only supported on Windows and not macOS. The macOS does not support writing on NTFS File System

FAT and exFAT only support file sizes up to 4GB. Furthermore, exFAT is cross-compatible, meaning that both macOS and Windows support it.

If you are using an external hard drive on a MacBook, you might want to use the APFS file system.

If you are certain that you cannot fix an external Seagate hard drive, you might want to recover files and folders inside them. There are multiple third-party applications that you can find on the internet. These applications are quite known for their data recovery prowess.

Fix: Icloud Drive Not Showing Files On Mac • Mactips

FIX: iCloud Drive not showing files on Mac

709

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

readers this month.

Protect your Mac on all fronts with unrivalled antivirus technology! Intego is a veteran when it comes to Mac security, bringing you well-researched and tested security features to protect your Mac against malware and cyber threats. Here are the most important features:

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Cloud storage can be incredibly useful, but many users reported that iCloud Drive on Mac isn’t showing all the files. This can be a problem, especially if you use cloud storage frequently, but there’s a way to fix it.

What can I do if iCloud Drive on Mac isn’t showing all files? 1. Change iCloud Drive options

Check Keynote, Numbers, Pages, and Preview.

2. Just wait it out

Many users reported that iCloud Drive isn’t showing all files on Mac simply because the files aren’t synced. It’s worth mentioning that the synchronization process can take hours if you have a large number of files.

The only solution is just to wait for the process to finish. As we mentioned, this can take hours, sometimes even days, so it might be best to leave your Mac running overnight and check if that solves the problem.

3. Use the Terminal

Open the Terminal.

Run the following commands:

killall bird

cd ~/Library/Application Support

rm -rf CloudDocs

3. Restart your Mac.

Once your MacBook boots, the syncing process should start immediately. We have to mention that a syncing process can take a couple of hours, so be patient.

If you want, you can monitor the syncing process by using the brctl log -w command.

4. Change your cloud storage solution

iCloud is the default cloud storage platform for Apple devices but there are plenty of other solutions out there that can offer even better conditions.

For instance, we recommend pCloud, a service that it’s offering storage for both Windows and Mac devices so it’s a lot better if you have gadgets from both worlds at home.

You have two possible options, the Premium storage offers 500 GB and the Premium Plus guarantees 2 TB. Your files will be absolutely safe because each one is stored in 5 copies on different servers.

You can test the platform since pCloud offers trials but it’s also covered by a money-back guarantee policy.

⇒ Get pCloud

FAQ: Learn more about iCloud issues on Mac

Why is my iCloud not connecting to my Mac?

How do I connect iCloud to my Mac?

How do I reset my iCloud on my Mac?

Editor’s Note: This post was originally published in May 2023 and has been since revamped and updated for freshness, accuracy, and comprehensiveness.

Was this page helpful?

Network Bridge Not Working? Here’s How To Fix It

We use a network bridge when joining two different networks to make them work as a single one. But if you haven’t configured the settings well, this feature might not work for you.

When we use a virtual machine, it creates a new network adapter for itself. However, for some reason, you may lose internet access on your VM if the network bridge setting isn’t done right.

If you want to fix this issue, you’re at the right place. Here, we have discussed what a network bridge is and why it is so important. Also, this article gives an insight on how to resolve the problem within the virtual box settings.

What is Network Bridge?

Before diving into the main topic, let’s first understand what a Bridge is. Basically, it is a networking device that connects two or more networks into one. This way, you can extend your LAN to a slightly larger area.

Let’s suppose you have set up two different networks at your home or office. But, you want one computer (connected to the first network) to communicate with another computer (connected to the second network).

To do this, you can connect the two networks to a Bridge. This way, you’ll have a single LAN network with two segments working on different collision domains.

But, if you’re running a virtual machine, you require at least two network adapters. Then, configuring simple Windows settings can help you bridge these connections.

Should You Bridge Two or More Networks?

Firstly, bridging two or more networks can reduce network collisions.

Since the network bridge is mainly used to create segmentation, we can notice that the network traffic is significantly reduced.

Well, network bridging can help create separate collision domains for each segment. This means it can provide enough bandwidth to those computers connected to the network.

Also, if you’re looking to connect two distinct network segments, a network bridge is probably one of the best options.

Lastly, you may bridge two or more networks when you don’t have any more ports available on your router, and the Wi-Fi connection isn’t that reliable.

How to Fix Network Bridge Not Working in Virtual Machines

Most of us have faced network bridge issues while using virtual machines. Whether you use VMWare or Oracle VirtualBox, you can easily configure bridged network settings on them. Below are some general fixes you can try if the network bridge is not working in your VM.

Select Bridged Option From Network Adapter Settings

The first thing to check is whether you have chosen the right Network Connection. Well, you must select the Bridged option in Virtual Machine Settings for the network bridge to work fine.

Basically, you’ll find other options too – NAT, Host-Only, Generic, etc. But we can’t achieve a bridged network if any of these is chosen.

On VMWare Workstation 16 Player

Follow these general steps on VMWare Workstation to check whether your Network Connection is set to Bridged or not:

On Oracle VM VirtualBox Manager

Similar to VMWare, you can choose the Bridged option on Oracle VM VirtualBox Manager using the following process:

Make VMnet0 Auto-Bridge to Manual In Virtual Network Editor

If your Network Connection is set to Bridged, but your network bridge is still not working, you can try choosing the VMnet0 option. By default, VMnet0 is set to Auto-Bridge. Now, we must bridge it to the network adapter connecting us to the internet.

Well, it’s best to apply these changes using the vmnetcfg application. However, this .exe file is only available in the VMWare Workstation Pro. So, here’s how you can do it:

Use a New Network Adapter

If neither of the two techniques works for you, it might be because of the corrupted network adapters on your virtual machine. Thus, this section guides you on how to create a new adapter on both VMWare and VirtualBox.

On VMWare

For demonstration, we have used VMWare Workstation 16 Player:

On VirtualBox

Otherwise, you can choose a new adapter instead of the one you used earlier.

Reinstall Your Virtual Machine

Now, the final option is to reinstall your virtual machine. To do so, you can uninstall the program from the Control Panel:

After removing the application from your PC, download the latest virtual machine version. Then, make sure you choose the Bridged option as we discussed above.

How to Fix Network Bridge Not Working on Windows 11 Host PC

Some PCs might lose internet connection after the bridging is complete. Moreover, you can also notice this on the Network Bridge, where it shows ‘Unidentified Network’. If you face this issue, go through the following steps to resolve it:

Related Questions How Can I Manually Bridge Connections on Windows 11?

Well, Windows provides a feature that helps to bridge connections on Windows in just a few minutes. This section covers the manual method of creating a Network Bridge by bridging two different network adapters and fixing the internet connectivity issue.

Follow these general steps to get an idea of how to bridge two or more connections on Windows 11 manually:

Rainmeter Weather Not Working? Here’s How To Fix It

Rainmeter gives you the freedom to completely change how your desktop looks. It allows anyone to create skins, so you can find any specific one you want, or create your own. Among all the widgets and skins, the weather widget is useful and it even tells you if you should wear a jacket or not.

However, these weather skins can sometimes stop working. The weather won’t load or you get an error message. This is a common issue among Rainmeter users and it usually happens when chúng tôi changes its API key. Or, it can be an issue with the skin itself. Fortunately, you can fix it without any complications.

This article will help you learn why you’re facing this issue and how you can solve it.

There are several causes for this issue. Some of them are listed below.

Issue with Web Parser plugin

Reloading the weather too many times

Change in API of chúng tôi with internet connection

Anti-virus/router blocking rainmeter

The easiest fix you can try is restarting Rainmeter using the task manager. Restarting may not always work, so you can try the other fixes given below.

To know if the problem is with the skin, you can try other skins for the weather. Preferably, you need to find a skin capable of getting data from chúng tôi If the other skins work, you can remove the one with potential bugs and install a new one.

To remove a skin from Rainmeter, follow these steps.

To install a new skin from the internet, follow these steps.

There can be corrupted cache files in your Rainmeter settings. When the cache and the latest data do not match, the skins can misbehave. To clear the Rainmeter settings cache, you can follow these steps.

Open run by pressing Windows + R on your keyboard.

Type in “%APPDATA%” and press Enter.

Go to Rainmeter folder.

Delete the rainmeter.ini file.

Restart Rainmeter.

Your anti-virus may recognize Rainmeter as malicious software. So, you can turn off your Anti-virus to check if the Rainmeter weather works. To disable Windows Defender, you can follow these steps.

Open the start menu and search for Windows Security.

Open the Windows Security app and select Virus & threat protection.

Select Manage Settings.

Turn off Real-time protection.

The process may differ for third-party Antivirus software.

If your Antivirus software flags any Rainmeter skins, we recommend you stop using those skins. But, if you want to keep using them, you can exclude the Rainmeter folder from the virus scan so that the antivirus will stop blocking it. You can find the guide to excluding a folder on the antivirus support website.

If your router has the option to block apps and websites, you’ll need to ensure that Rainmeter is not blocked in any way. You can go to your Router’s login page and check it.

The process differs according to the manufacturer of your router, so you will have to find the guide for your specific model.

Reinstalling Rainmeter is the last option. When reinstalling, the chances of the issue remaining unsolved will be greater if you back up your skins. So, we recommend you install all the skins one by one after the reinstallation is completed.

To reinstall Rainmeter, follow these steps.

Images Not Loading On Iphone? Here’s How To Fix It

In rare situations, images on your iPhone may not load in certain apps like Messages, Safari, WhatsApp, or others. This guide shows you how to fix this issue and ensure images start showing properly.

General fixes for images not loading on iPhone

Images often may not load due to minor problems, and the following basic tips should take care of those.

Check your internet connectivity

Secondly, if you aren’t on Wi-Fi but cellular data, open the Settings app, then tap Cellular. Here, scroll down and ensure the app’s toggle is activated. If it’s off, that means the app can’t use cellular data, and thus it doesn’t load images due to not being connected to the internet.

Some apps and services may not work correctly with a VPN. So, if you’re using a VPN on your iPhone or router, turn it off.

Related: What to do when your iPhone or iPad can’t connect to Wi-Fi

Restart your iPhone

When images are not loading due to temporary issues, turning off your iPhone and turning it back on should help.

Restart your Wi-Fi router

If you are experiencing general issues with your Wi-Fi connection at home, an easy fix may be to restart the router. To do this, you can either press the power button or simply unplug the router. Either way, leave the router powered off for 30 seconds. Turn the router back on and wait for your device(s) to reconnect, then check to see if images load properly.

Related: A bug in iOS 15 makes saved Messages photos disappear after a backup

Ensure sufficient free space on iPhone

Images and videos may not load or download in several apps like WhatsApp and iMessage if you don’t have adequate free space. Plus, due to insufficient space, you might see an increase in the number of random app crashes.

To fix this, make sure you free up some local storage of your iPhone. The easiest way to do that is by deleting apps, photos, videos, and songs.

Must see: 40+ ways to save storage space on iPhone and iPad

Reset network settings (as the last option)

Resetting your iPhone’s network setting is another handy option that fixes network issues that may be preventing images from loading successfully. However, before you reset your iPhone’s network setting, make sure you follow the other methods listed here. If they don’t work out, go ahead and reset the network settings.

Fix images not working in iMessage

With iMessage, you can send and receive photos and videos. Plus, it has an #images iMessage app that lets you find and send GIFs to spice up conversations. Here’s how to fix the potential issues that may cause images and/or GIFs from loading properly in iMessage.

Ensure iMessage is enabled