Trending December 2023 # How To Unlock Your Iphone With A Face Mask On # Suggested January 2024 # Top 13 Popular

You are reading the article How To Unlock Your Iphone With A Face Mask On updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Unlock Your Iphone With A Face Mask On

Hopefully, we don’t have to tell you about the importance of wearing a face mask, especially now in a post-COVID world. These pandemic-induced circumstances have changed the way we interact with our devices. Apple has already responded to those changes with some useful new features, one of them designed to accommodate face masks. Let’s talk about how to unlock your iPhone while wearing a face mask.

How to Unlock without Apple Watch

Previously, unlocking your iPhone without taking off your mask was possible only if you had an Apple Watch. Thankfully, there’s now also a solution for those who don’t own an Apple smartwatch. However, it’s available to you only if you have an iPhone 12 or newer and use iOS 15.4 or later.

Launch the Settings app on your iPhone.

Scroll down and select “Face ID & Passcode.” Type in your passcode when asked for it.

Toggle on “Face ID with a Mask.”

On the next screen, you will get an option to use (or not use) Face ID with a face mask. Tap on “Use Face ID with a Mask.”

Your iPhone will scan your face again, and after that, you will get a confirmation message saying that your Face ID is now set up. Tap on “Done.”

Now you can unlock your iPhone using your Face ID, even with a mask on.

You can use your Apple Watch to unlock your iPhone with a face mask on, thanks to the “Unlock with Apple Watch” feature. Of course, you’ll need to meet the following requirements:

iPhone with Face ID and iOS 14.5 or newer

Apple Watch Series 3 or newer with watchOS 7.4 or newer

You’ll be surprised with how easy it is to enable your iPhone to scan your face while wearing a mask. This procedure will take only a moment of your time, as you’ll see in these quick steps:

Launch the Settings app on your iPhone.

Scroll down and select “Face ID & Passcode.”

Type in your passcode when asked for it.

Scroll down until you see the section labeled “Unlock with Apple Watch” and find your Apple Watch that is connected to your account. Ensure that it is enabled, with the toggle set to ON.

Your iPhone will ask you to confirm that you want to enable this feature, giving you a short introduction of how your iPhone will behave while you’re wearing a face mask. Tap “Turn On.” It may take a bit of time (around 30 seconds in our case) for this feature to activate.

Use this option while wearing a face mask and your Apple Watch. Also, your smartwatch should be unlocked, so enter your password if it isn’t.

Raise your iPhone just like you would do to unlock it. Your phone will now scan your face and identify that you’re wearing a face mask.

As soon as you glance at your phone, it will unlock. You can now slide up from the bottom of its screen to start using it. Your Apple Watch will show a quick alert, letting you know it has unlocked your iPhone.

Keep in mind that “Unlock with Apple Watch” doesn’t use Face ID to identify you. That means you can only use it to unlock your iPhone. In other words, you can’t use it to verify your identity, use Apple Pay, or access password-protected apps.

Yes! Face masks were enough of an obstacle to using Apple Face ID, and adding glasses to the mix only complicates things. However, it’s easy to get past this:

Of course, the “Add Glasses” option appears as soon as you set up Face ID; you don’t need to enable the face mask setting to use this feature.

Yes. You have the option to add up to four different pairs of glasses at the same time.

Even though Apple claims that the color of your mask won’t have any effect on the accuracy of Face ID, many users have reported that sometimes they face trouble logging in while wearing a different mask. The only way to know for sure is to experiment with multiple masks to see which one works best for you.

Image credit: Monstera on Pexels

Ojash Yadav

Ojash has been writing about tech back since Symbian-based Nokia was the closest thing to a smartphone. He spends most of his time writing, researching, or ranting about Bitcoin. Ojash also contributes to other popular sites like MakeUseOf, SlashGear, and MacBookJournal.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading How To Unlock Your Iphone With A Face Mask On

Can’t Unlock Iphone With Apple Watch? 7 Quick Fixes

Plenty of people on Apple forums have complained about the unlock with Apple Watch feature not working on their iPhone. Typically, you have to swipe up your iPhone’s Lock Screen while wearing an Apple Watch and a mask to unlock it. But if you’re facing problems using this feature, try these quick fixes listed below.

However, ensure you are meeting the basic requirements before you dive into the fixes.

Note: This feature is only for unlocking your iPhone. If you’re trying to authenticate a transaction using your Apple Watch, it won’t let you do so.

If your setup does not match the below requirements, the feature won’t work for you.

Make sure your iPhone has a Face ID sensor. This includes all iPhones with the notch, iPhone X, and above.

It is only available on iPhones running iOS 14.5 and above, so make sure your iPhone is up to date.

Make sure you have an Apple Watch Series 3 or above running watchOS 7.4 or later.

Ensure that your Apple Watch is passcode-protected and unlocked when trying to unlock your iPhone.

You must wear a face mask covering nearly 50% of your face’s area for this feature to work.

Ensure that your Apple Watch and iPhone are in range and connected.

Despite meeting the requirements, if you are unable to use the feature, jump to our fixes.

1. Make sure all the settings are correct

2. Turn off/on Bluetooth and Wi-Fi

For the feature to work correctly, make sure Wi-Fi and Bluetooth on both Apple Watch and iPhone are enabled.

To turn off Wi-Fi on your iPhone, head over to Settings → Wi-Fi → Toggle off Wi-Fi. Similarly, go to Settings → Bluetooth → Toggle off Bluetooth.

On Apple Watch, go to Settings → Toggle off both Wi-Fi and Bluetooth.

Remember to turn them on after you disable them. Otherwise, the feature won’t work.

3. Reset Face ID on iPhone

Sometimes, the problem might be with the Face ID sensor on your iPhone. In this case, try resetting the Face ID on your iPhone.

4. Restart iPhone and Apple Watch

It’s recommended that you restart your iPhone at regular intervals, such as every couple of days, to keep it running smoothly. In this case, it might just help you to make this feature work.

5. Re-connect Apple Watch and iPhone

In some cases, re-pairing your Apple Watch with your iPhone may solve the problem.

To unpair the Apple Watch, go to the Watch app on iPhone → My Watch → Tap the ‘i’ button → Unpair. To re-pair, just bring your Watch near the iPhone, and the pairing screen to connect them should pop up.

6. Reset iPhone Network Settings

If the problem persists, I recommend resetting your iPhone’s network settings. To do so, go to Settings → General → Reset → Reset Network Settings and enter your device passcode to confirm the action.

7. Reset Apple Watch and pair it with your iPhone

If none of the above fixes work, a complete reset of the Apple Watch might be required. It will reset all the settings to default. Here’s how you can easily reset your Apple Watch and re-pair it to your iPhone.

Author Profile

How To Lock Or Unlock Your Apple Watch

From credit card information for contactless payments to photos and messages, smartwatches store a lot of potentially private data. Find out how to lock and unlock your Apple Watch to keep your device secure.

Read more: Everything you need to know about Apple Watches

Keep your wearable secure. Apple Watch users are prompted to create a passcode when setting up the device. This can be any four to ten digit number and does not have to be the same passcode as that of your iPhone.

Automatic lock settings

Your Apple Watch will lock automatically when you are not wearing it. You can adjust this default setting by changing your wrist detection preferences.

On your Apple Watch, open the Settings app.

Scroll down to and tap Passcode.

Tap the green toggle next to Wrist Detection. You will be prompted to enter your passcode.

Read through the information about disabling this feature, then tap Turn Off to confirm.

Once you turn off Wrist Detection, the watch will no longer automatically lock or unlock. This will also disable additional features such as heart rate tracking and notifications. The watch also won’t automatically make an emergency call if a fall is detected.

Manually locking your device

If you choose to disable Wrist Detection, you will still have the option to manually lock your Apple Watch.

Swipe up from your watch face to open the control panel.

Tap the lock icon.

How to unlock your Apple Watch with your iPhone

You can also set the wearable to unlock automatically when you unlock your paired phone. The iPhone just needs to be within Bluetooth range of your Apple Watch. While you can disable this feature from the wrist, you can only enable it from the Watch app on your iPhone.

On your paired iPhone, open the Watch app and tap My Watch.

Scroll down to and tap Passcode. If your watch is locked, you will be prompted to unlock it.

Tap the toggle next to Unlock with iPhone. You may be prompted to enter your Apple Watch passcode again.

How to change your Apple Watch passcode

On your Apple Watch, open the Settings app.

Scroll down to and tap Passcode.

Tap Change Passcode and follow the onscreen prompts.

You will need to enter your current passcode and cannot reuse the same one again.

If you want to skip the extra security, it is possible to turn off the passcode lock on your Apple Watch from your phone or the device itself. However, if you disable your passcode, you will not be able to use Apple Pay on your Apple Watch.

From your watch

On your Apple Watch, open the Settings app.

Scroll down to and tap Passcode.

Tap Turn Passcode off.

Tap Turn Off to confirm.

From your iPhone

On your paired iPhone, open the Watch app and tap My Watch.

Scroll down to and tap Passcode.

Tap Turn Passcode Off.

Tap Turn Off Passcode Lock to confirm.

What to do if you forgot your Apple Watch passcode

Kaitlyn Cimino / Android Authority

If you can’t remember your passcode, it’s not the end of the world. You can either unpair or reset your Apple Watch. This will erase your watch settings and current passcode. When you repair the device, you can simply set a new one. You can also restore your backed-up data during the pairing process.

Read more: Common Apple Watch problems and solutions

FAQs

To water lock your Apple Watch swipe up on your Apple Watch face to access the control panel, then tap the water drop.

Easily Root Your Karbonn A21 With Unlock Root Tool

WARNING!

Warranty may be void of your device if you follow the procedures given on this page.

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

GUIDE: ROOT KARBONN A21 WITH UNLOCK ROOT TOOL

Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

STEP 0: CHECK DEVICE MODEL NO.

To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be A21!

Please know that this page is meant only for Karbonn A21. Please DO NOT try the procedures given here on any other device of Karbonn or any other company. You have been Warned!

STEP 1: BACKUP YOUR DEVICE

Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

For help on Backup and Restore, check out our exclusive page on that linked right below.

► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

STEP 2: INSTALL LATEST DRIVER

You must have proper and working driver installed on your windows computer to be able to successfully root your Karbonn A21.

In case you’re not sure, follow the links below for a definitive guides for installing driver for your Karbonn device on your computer.

► INSTALL DRIVERS ON ANY PHONE USING PDANET

STEP 3: INSTALLATION INSTRUCTIONS

Download the files given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

Download the latest version of Unlock Root from the official website here.

Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after rooting with this tool, which might delete internal sd card too, your files will remain safe on PC.

└ Note: Antivirus installed on your PC may cause some problems while rooting. So temporarily disable the Antivirus protection on your PC.

Turn on USB Debugging on your Karbonn A21.

Enable developer options: Go to your device’ Settings » select About device » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Open device’ Settings » select Developer options » Tick the “USB debugging” checkbox. (under Debugging section)

Connect your Karbonn A21 to PC. Your PC should detect your device.If your PC doesn’t detect your device, here are some troubleshooting tips:

Make sure you have installed driver for Karbonn A21 as said above in ‘Before you begin..’ section.

If you have already installed driver, then uninstall them and reinstall back.

Connect using a different USB port on your PC.

Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

Reboot your phone and PC and then try again.

└ Note: Ignore the messages like your phone is already rooted if you got any.

During the rooting process it may ask your permission to install some additional apps on your phone. Make your choice and continue.

After the reboot, you will find the SuperUser app in the app drawer. Congrats your device is rooted!

FEEDBACK US!

It was easy to root your Karbonn A21, right? Let us know how you are plan to utilize root privileges on your Karbonn A21.

Your suggestions and queries, if any, are most welcomed!

Does Your Favorite Mask Actually Work? Researchers Now Have A Way To Tell.

Until 2023, if your job or health didn’t require it, it’s likely that you never thought about wearing a protective face covering. Now, as the airborne coronavirus remains a threat in most of the world, how to wear a mask and which one is best are at the top of many people’s minds. According to a study out last week in Science Advances, there could be an easy way to test how superior a mask is. The study deployed an easy-to-replicate testing apparatus that the researchers hope could be copied by mask-makers to test their masks’ effectiveness.

Their proof-of-concept results suggest that some masks may be superior to others. In the limited study, fleece gaiters, folded bandanas, and knitted masks all offered little protection from spreading airborne droplets that could contain the novel virus while simple, multi-layer cloth masks could be more effective. These results align with previous suggestions by the CDC and others. However, the results were limited and based on a very small sample size. And, as the researchers note, the main goal was to study the effectiveness and ease-of-use of their testing apparatus.

“The general message is [that] we strongly encourage people to wear a mask,” says study author Martin Fischer, a professor of chemistry at Duke University who studies molecular imaging. “The mask doesn’t have to be perfect…but we’d like people to wear a mask that actually works.”

To figure out which popular mask options could be the most effective, the researchers turned to lasers. They set up a dark box and sent a laser beam through it. Inside the box, a thin sheet of light forced the laser to change directions, or refract. On one end of the box a person stood with a mask on and spoke into the box. When a respiratory droplet flew through the sheet of light, the laser would scatter the light. On the other end, a cell phone camera was set up to record the whole experiment.

This was a simple way to visualize how many droplets were reaching the light sheet, Fischer says. And he was surprised to see how many were doing so, even when the speakers in their experiment were masked. “These particles are just too small to see by eye,” he says. “And this technique is just a very easy visualization tool.”

Researchers tested 14 popular types of face coverings with their proof-of-concept device. Martin Fischer, Duke University.

The droplets that passed through the mask are much smaller than what a person might produce when they cough or sneeze and can travel much farther in the air. There is a growing body of evidence that these so-called aerosolized droplets play a significant role in COVID-19 transmission.

“The strength of using laser light scattering is that you can see with your own eyes that everyone sprays saliva droplets when they speak,” says Christina Bax, a research fellow and fourth-year medical student at the University of Pennsylvania who was not involved in the research. “[It’s exciting] to see that their team was able to use the laser light scattering method to test face masks and to show the efficacy of numerous types of masks.”

Unsurprisingly, when they tested fitted N95 masks with the apparatus, only 0.1 percent of droplets made it through the masks. Fischer notes that those masks are still being prioritized for healthcare workers for that reason.

Among the N95 alternatives that regular people are turning to for their everyday use, they found that multi-layer cotton masks and disposable surgical masks were more effective than bandanas and fleece gaiters, which runners often wear. In total, they tested 14 kinds of masks.

One surprising result was in regards to masks with valves. They found these masks to be about as effective as many two-layer homemade masks. According to Fischer, some researchers had previously thought that these masks would be highly ineffective because the valve on them is designed to make them more comfortable for the wearer and to allow their breath to escape the tight-fitting mask. In other words, they protect you from the outside world, not the other way around. The likely reason for the masks’s unexpected effectiveness in this experiment is that the valve doesn’t open unless you breath hard, Fischer says, which means that if someone is speaking softly it may not be opening. In that case, it’s really effective. But if the valve is opening, such as if someone is talking loudly, walking fast or running, it’s ineffective because the valve is open.

Another surprise to Fischer was that fleece gaiters might offer little protection because the droplets that pass through them are divided into smaller, more numerous aerosols in the process.

It’s important to note that all of these findings are preliminary. The ultimate goal of the study was to analyze the testing apparatus itself, so it’s not possible to draw any ultimate conclusions on the effectiveness of the different masks. Rather, the researchers hope their relatively simple setup can be duplicated by mask-makers looking to test out how effective their product is. “This setup is really easy to assemble. The parts you could probably get for $200,” Fischer says. But he also cautions against trying it is a home setting, because of the laser. “It’s a cheap laser, but you could easily damage your eyes, because it’s very powerful.”

There’s still a lot to know about how masks practically work to prevent COVID-19 transmission, but this study contains some important information that may ultimately help mask-makers and mask-wearers alike.

Installing Themes On Your Iphone Without A Jailbreak

Theming your iPhone, iPod touch, or iPad has been a long time primary reason of jailbreaking. Unfortunately, as the wait for a new jailbreak becomes ever so longer in between iOS releases, the jailbreak scene is becoming less reliable for getting the features you want on the latest version of iOS.

For those who are tired of waiting, iSkin is a new platform that can be used directly from your Safari web browser to install themes on your iOS device without a jailbreak, and we’ll show you how it’s used in this tutorial.

It might sound too good to be true, and in some ways it is, but it’s now possible to have themed app icons on your Home Screen without having a jailbreak. This method works on iPhone, iPod touch, and iPad running iOS 7 and later.

So why did I say it might be a little too good to be true? Well for starters, yes it’s going to add themed app icons to your Home Screen without a jailbreak. But… that’s exactly what it does. It adds themed app icons to your Home Screen; it doesn’t replace your existing ones.

So basically, iSkin is going to add shortcuts to your Home Screen. These shortcuts can be used to launch the respective app or web clip link with a simple tap on the corresponding shortcut. This means you’ll want to add all your stock iOS icons into some kind of folder to hide them afterwards once you’ve downloaded a themed pack of app shortcuts.

Once you’re sure you want to proceed, you can follow these steps to select a theme you want to install:

1) Visit the iSkin web page in Safari on the iOS device you wish to theme.

2) Scroll down and tap on the Browse all themes button to reveal a list of themes to pick from:

3) Pick a theme you want to install. We’ll be using the Midnight theme by citydog123 for our example.

4) Now you’ll want to tap on the Application icons button. This section lets you select what apps you want to theme on your Home screen.

5) Tap on every one of the app icons that you want to theme to select them, and make sure to give each app the name that you want it to have from the text fields that appear at the right of every app icon.

6) When you’re happy with the selection you’ve made and the names you’ve created, scroll all the way down and tap on the Install icons button.

7) A prompt box will tell you to wait a few seconds while the installation takes place, and then you’ll be asked to install a configuration profile.

9) If you have a passcode, enter it and then tap on the blue Install button once again. Then, tap on the red Install button to confirm.

10) Once installed, tap on the blue Done button and you’ll be returned to Safari.

11) Once back in Safari, it’ll only take moments before the theme pack is installed on your Home screen. You’ll know things are going good if a green box is displayed that says Installation in progress… in it.

12) Wait a moment and then go to your Home screen and scroll to the last page. You’ll see all your new themed app icons:

That’s all there is to it! Now you can move these themed app icons anywhere you want them and put all your original app icons into a folder somewhere so they don’t distract you.

There are some things you need to know about using iSkin. We’ll talk about those below.

Third-pary configuration profiles

iSkin is going to want to install a configuration profile, which is untrusted. Obviously, you do this at your own risk. We tried it and everything seems to be alright, but some people are much more wary than I am about installing configuration profiles because they’ve got much more personal information on their devices than I do.

You can delete individual themed apps

If you accidentally add a themed app icon to your Home screen that you don’t want, or you choose to remove a theme, you can easily delete the themed app icons from your Home screen by entering jiggle mode and tapping on the X button that appears on the icon.

The shortcuts are web clip links

Because the shortcuts are web clip links, each time you launch an app you are actually launching a Safari link that then links to either the corresponding app. iOS 9 doesn’t like this that much, and it activates the breadcrumbs links in the Status Bar.

For some apps, like the Calculator app, a web interface is launched instead of the Calculator app, which is kind of odd and undesirable.

For some, this may be an annoying thing to have to get used to. Personally, it’s a make-or-break situation for me (I prefer my jailbreak, thanks!), but it’s still going to be a potential option for those that want to theme their devices without a jailbreak.

Wallpapers and more are included

In addition to app icons for your Home screen, some theme packs include wallpapers to go with them. Downloading wallpapers are optional, and you can keep your own wallpaper if you would like to.

Unfortunately, because of limitations set by Apple, you can’t theme UI elements like Notification Center, Control Center, and more.

Some themes are premium-only

Most of the themes are easy to download without creating an iSkin account, but some of them are premium and you’ll be asked to make a free iSkin account.

More themes are always being added

Developers work hard on these themes, and more are constantly being added as time goes by. You can also contribute if you’re a theme maker by following the directions provided on the iSkin website.

iSkin isn’t a perfect theming platform, but nevertheless, the ability to add themed app icons to your Home screen without a jailbreak is something that some people are going to really enjoy.