You are reading the article How To Troubleshoot Office Activation Problems And Errors updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Troubleshoot Office Activation Problems And Errors
All paid products from Microsoft go through the Activation process. While most of the time it works, sometimes there is a problem. In this guide, we are looking at some common solutions to troubleshoot Office activation. It covers Office 365, Office 2023 and Office 2023 and Office 2013. We will look at the following:
Check Office subscription status or an active license
Make sure to use the right account
Use Microsoft Office Activation Troubleshooters
Use a valid key, and where to find the key in your account.
Troubleshoot subscription notice.
Switching Office 365 subscription plan
Installing Office for two different countries
Office HUP account
Troubleshooting Office activation issues 1] Make sure you have an active subscription or an active licenseMake sure you have an active subscription. When your subscription expires, Office products will have reduced functionality. You should also get an error message asking to renew the subscription. Go to chúng tôi and check subscription status under orders.
2] Use the same account to activate Office with which you made the purchaseYou may have multiple Microsoft account. You might have accidentally used a different account to buy Office subscription, and have a using other to activate it. Make sure to use the right account to activate the subscription. In case you have accidentally renewed subscription with some other account, use that for Office to enable it.
3] Microsoft Office Activation Troubleshooters for Office 2023 & Office 365Read our in-depth guide on how you can use the Office Activation Troubleshooter to fix usual problems around activation.
4] Use the right Key, and here is how you can find it
Next, go to Online Microsoft Store and sign-in with that account.
You can use this to activate Office. In case you bought Office 365 or any other online version, all you need is active subscription and sign-in with it.
Read: How to uninstall Microsoft Office Product Key.
5] A subscription notice appears when I open an Office 365 applicationHere is a list of a subscription notice you can get. It usually appears in red or yellow. The common reasons behind it are either your subscription has expired, or payment has failed on renewal, or an update is required. The last one appears when subscription type changes.
The messages will have enough information to help you understand the exact problem.
Renew your subscription or Subscription expired
Product Deactivated
Couldn’t Verify Subscription
ACCOUNT NOTICE or UPDATE REQUIRED: Your Office 365 subscription has a pending change
ACCOUNT NOTICE. We’ve run into a problem with your Office 365 subscription and need your help to fix it.
Unlicensed Product or a different activation error.
If your computer is part of an enterprise, ask your IT admin to troubleshoot Office activation.
7] “Account Notice” appears in Office after switching Office 365 plansMany a time consumers change their Office plans. You might have moved from Office 365 Professional to Home or vice versa. It is possible that you might have to install the version of Office that comes with your new plan. Sometimes it takes 1-3 days or even more for the client to realize it.
Depending on the message, you will be given the option to sign-in or update the application.
8] Error when installing Office for two different countriesThis error occurs when using Office 2013. When you change region or country, you need to buy a separate copy for each of them. The best way is to use two different accounts. Switch when you need to switch the country or region.
When it comes to Office 2023, you need to install a LAP or Language accessory pack for Office 2023. Once installed, you can switch the settings. However, you cannot run two instances of Word or Excel or anything else in two different languages. Once the language is installed, you can configure your active Office language.
Steps to change Language accessory pack for Office 2023
Select the language in which you want to edit the document. You can add multiple languages, and set one as default.
The default language is used for editing and proofing
Restart all Office programs for changes to take effect.
Microsoft HUP benefitWe hope these tips help you troubleshoot Office activation problems.
You're reading How To Troubleshoot Office Activation Problems And Errors
How To Use Windbg To Troubleshoot Blue Screen Stop Errors
A Blue Screen error occurs on the Windows system after a system crash. The blue screen pops up unexpectedly, forcing you to restart the system in the middle of your work. The error is an unpremeditated sign and is quite frustrating when you find it hard to debug the problem. Fortunately, there are many handy tools like the Windows Debugger Tool (Windbg), which allows you to read the error report for troubleshooting and solve the BSOD error.
Causes of BSOD errorThe BSOD error is displayed when your operating system reaches a threshold limit where the system is vulnerable and can no longer function safely. BSOD usually occurs for several reasons like faulty drivers, corrupted Windows registries, overheating, misconfigured device drivers, corrupted files, outdated drivers, overclocking, bad software and other system hardware issues.
Fixing BSOD errorThe Blue Screen error, also called a Stop Error causes your Windows system to stop completely, and you may have to reboot the system to continue to operate.
However, before the reboot, it is recommended that the users note the error code displayed on the blue screen. That being said, the BSOD error pops up mostly when your system is unable to recover the kernel-level error. The error message usually displays a whole load of crash information with driver data associated with the error and other information with their possible fixes.
What is Windows Debugger Tool (Windbg) New features of WinDbgSimpler and less intimidating
WinDbg is often found quite intimidating, but the new version is said to be less intimidating with a better and simple interface. The tool is specifically re-designed for beginners to help them understand.
Earlier, it was a bit difficult for the new users to get convenient with the toolbar or menu. But, the new version has a Ribbon that includes which currently is plain, but will soon be getting the specific contexts while you are debugging.
The new File Menu is simpler, and users can easily select the options before they start with the debugging session. The attached dialog is also made simpler and more organized now. You can also launch some background tasks or your Store App without setting up with PLMDebug.exe.
Improvements and ModernizationsAfter quite a while, WinDbg has some quality improvements and modernization which include a darker theme, some window improvements, and the recent targets.
Dropping the glaring brightness, WinDbg now comes with a dark theme which is preferred by most of users. The new version of WinDbg now will remember all your settings and the recent debugging sessions instead of having your IP and KDNET on a sticky note on your monitor. All your recent sessions will now be logged in the File Menu as your recent target list.
Microsoft has now made the windows more synchronous and also lets the users cancel the loading by running another command. There are various other window improvements listed too.
Data modelData model up until now was accessible only through the dx command and JavaScript, but with the WinDbg preview, the data model is more extensible, powering the locals and watch windows. JavaScript extensions and NatVis will now be reflected in those windows.
WinDbg preview comes with a new window termed as a modal window which will help you with your own modules window with @$scurssion.Modules. It will also show up the results of any model query in a table or a hierarchy view.
The WinDbg comes with a built-in scripting environment where you can write and execute your NatVis and JavaScript directly from the debugger.
While the new features and improvements are announced by Microsoft via their blog, the WinDbg is still a preview version and comes with some restrictions. Only the devices running Windows 11/10 can install it via Windows Store.
The workspace of the new WinDbg Preview has changed a lot and is quite different and better from the previous version, but since it is a preview version, there might be some bugs and errors, too, which will be taken care of.
How to use Windbg Installing WindbgDownload the standalone Windows 10 SDK here.
Run the installer and choose the default installation path.
Accept the license and select the feature Debugging tools for Windows to install the debugger.
Using Windbg to debug a Blue Screen errorGo to Start and type WinDbg (x86).
WinDbg will now analyze the file and Wait till the Debuggee not connected disappears at the bottom of the window.
Once you identify the problematic driver, you can choose to either update or reinstall the problematic driver from the manufacturer’s web page in order the fix the problem.
Hope this helps!
This has to be done each time you open WinDbg – unless you save the Workspace for later use.
Read: A debugger has been found running in your system.
Kms Activation Errors. Fix This Problem In 4 Easy Methods
KMS activation errors. Fix this problem in 4 easy methods
871
Share
X
The first step is to tweak the SoftwareProtectionPlatform settings, then restart your computer for the changes to take effect.
If there is no KMS server available, you can use the MAK key instead. Another method would be to configure a KMS host server.
Unfortunately, activation errors still happen but if you experience one, go straight to our Activation errors section to learn what to do.
If you still have the old Windows 7 installed and you have problems that need solutions, you can count on finding on in our Windows 7 fix hub.
The latest Windows 7 updates, including KB4480970, brought quite a long list of bugs.
Here are some of the most frequent issues reported by users: network drive doesn’t work, SMBv2 sharing often stops working, database format is not recognized, and so on.
If you’re interested, you can read this report to learn more about these issues.
Users who complained about KMS errors also pointed out the following issues:
KMS activation error 0x80070002
Windows 10 kms activation error 0xc004f074
Windows 7 activate error this product is incapable of kms activation
Office 2010 kms activation error 0x80072f8f
Apart from the bugs listed in our previous report, recent user reports confirmed KMS activation errors are on the rise as well. As a result, we compiled this list of potential solutions to fix these errors.
How can I fix Windows 7 KMS activation errors? Method 1: Tweak SoftwareProtectionPlatform settings
net stop sppsvc
del %windir%system327B296FB0-376B-497e-B012-9C450E1B7327-5P-0.C7483456-A289-439d-8115-601632D005A0 /ah
del %windir%system327B296FB0-376B-497e-B012-9C450E1B7327-5P-1.C7483456-A289-439d-8115-601632D005A0 /ah
del %windir%ServiceProfilesNetworkServiceAppDataRoamingMicrosoftSoftwareProtectionPlatformtokens.dat
del %windir%ServiceProfilesNetworkServiceAppDataRoamingMicrosoftSoftwareProtectionPlatformcachecache.dat
net start sppsvc
lmgr /ipk 33PXH-7Y6KF-2VJC9-XBBR8-HVTHH
Note: Use a key that’s compatible with your environment. The example above is a key for Win7 Enterprise. For more information on the keys to use, go to Microsoft’s support page.
slmgr /ato
Method 2: Use a MAK product keyIf there is no KMS server available, you can use the MAK key instead.
Launch Command prompt as an administrator and enter this command:
slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx (enter your MAK product key after ipk)
Hit Enter and wait for the command to take effect.
Method 3: Configure a KMS host serverKMS activation errors often occur because there is no valid KMS server for your clients to activate against. In this case, you need to install and activate a KMS server.
Once you’ve set up a computer to host the KMS software, you can go ahead and publish the Domain Name System (DNS) settings.
For detailed information on the steps to follow, you can check out the following Microsoft support pages:
Method 4: Create a KMS SRV record in MS DNS serverHere’s what you can do if your client cannot locate a KMS host on the network:
Verify that your KMS host is installed and has been activated with a KMS key registered in DNS.
Verify the registry to make sure the KMS host server is registering with DNS.
For a step-by-step guide, go to Microsoft’s support page.
Additionally, you can also assign a KMS server manually. If this action didn’t help, you can automatically publish KMS in multiple DNS domains.
Now, if you’re one of these specific error codes: 0xC004C001, 0xC004C003, 0xC004C008, 0xC004B100, 0xC004C020, 0xC004C021, 0xC004F009, 0xC004F00F, 0xC004F014, 0xC004F02C, 0xC004F035, 0xC004F038, 0xC004F039, 0xC004F041, 0xC004F042, 0xC004F050, 0xC004F051, 0xC004F064, 0xC004F065 , 0xC004F06C, 0x80070005, 0x8007232A, 0x8007232B, 0x800706BA, 0x8007251D, 0xC004F074, 0x8004FE21, 0x80092328 or 0x8007007b, you can use the solutions listed in this troubleshooting guide from Microsoft.
How do I fix kms error 0xC004F074?
Error code 0xC004F074 means that the Key Management Service (KMS) could not be contacted during the activation procedure. The solution is to run an SFC scan.
How long does KMS activation last?
The KMS activation validity interval is 180 days. KMS clients must renew their activation by connecting to the KMS host at least once every 180 days to remain activated.
Was this page helpful?
x
Start a conversation
Siri Not Working On Iphone Or Ipad? How To Fix Siri & Troubleshoot Problems
Siri usually works great on iPhone and iPad, but sometimes Siri stops working or Siri may not work as intended. If you experience problems with Siri, this guide will walk you through troubleshooting Siri so that you can fix Siri to work on your iPhone or iPad again.
We’ll cover several effective troubleshooting tricks to fix common problems with Siri.
How to Fix Siri Not Working on iPhone, iPadThe first things you should do if Siri is not working is to check the following:
Be sure the iPhone or iPad has an active internet connection through wi-fi and/or a cellular connection
Make sure nothing is obstructing the microphone on the iPhone or iPad (for example, some cases may cover the microphone)
Be sure that Siri is enabled in Settings
Be sure you are speaking clearly and concisely in a language Siri recognizes
Most Siri problems come down to an issue with the devices wi-fi or internet connection, which is why that should be the first thing to check, along with making sure the microphone is not covered and that the service is actually enabled. If you still experience trouble with Siri, or if Siri continues to not work, the following tips should be followed to troubleshoot.
Fix Siri by Rebooting the iPhone, iPad, iPod touchForcibly restarting the iPhone or iPad is often enough to fix an inexplicable Siri problem.
For most iPhone and iPad models, hold down the Home button and Power button as described here
For iPhone 7 and newer, hold down Down Volume and Power button as described here
You can also issue a soft restart by turning the iOS device off and back on again.
When the iPhone or iPad boots back up again, try to use Siri as usual, it should work.
Fix Siri Problems by Toggling Siri Off & On AgainHere is how you can toggle Siri off and on again, which resolves many of the simple issues with the service:
Open the “Settings” app on iPhone or iPad and go to “Siri”
Turn the setting next to “Siri” OFF by hitting the toggle switch
Confirm that you want to turn Siri off by tapping “Turn Off Siri”
Wait a few moments, then toggle the Siri switch back ON to re-enable Siri in iOS
Hold down the Home button to activate Siri and ask a question to confirm the feature is working as intended
Often just toggling the feature back on is sufficient to get Siri working again. Sometimes users find the feature was turned off too, which is a bit unusual but obviously if Siri is disabled then Siri can’t be used.
If Siri says “Siri Not Available” or “I’m sorry, I can’t complete your request right now” or similar…Siri Not Available and similar error messages usually indicate that Siri has a problem with the internet connection. Be sure you are connected to wi-fi or an active cellular data plan, and then try again later.
Very rarely, Siri may not be working because of a problem with an Apple Siri Server that is unrelated to the iPhone or iPad itself, but that is uncommon. If that is the case, Siri should start working again shortly on its own.
Other Siri Troubleshooting Basics
Does the iPhone support Siri? Obviously this guide only applies to iPhone and iPad devices that support Siri, if you have an ancient model device it will not have the Siri feature at all
Siri requires internet access to use, the iPhone or iPad must be on wi-fi or have an active cellular connection to use Siri
Siri must be enabled for the feature to be usable
Siri must have a functioning Home button for the feature to be activated (aside from Hey Siri, which is voice activated)
If Siri is working but Hey Siri is not working, be sure to enable Hey Siri separately in Siri settings
Related
Sidecar Not Working? How To Troubleshoot
Apple’s new macOS operating system (Catalina) let you use your iPad as a second screen for your Mac if your Mac and iPad models support this feature called Sidecar. You can also use this feature wired or wirelessly. Sidecar also lets you use your Apple Pencil.
This article reports common Sidecar problems and explains what to do when Sidecar is not working properly.
Basics and Requirements
MacBook Pro – 2023 or later
MacBook – 2023 or later
MacBook Air – 2023 or later
iMac- in 2023 or later
iMac Pro
Mac mini – 2023 or later
Mac Pro – in 2023 or later
You also need to have a compatible iPad running iOS 13 or later. The following iPad models are compatible:
iPad Pro: all models
iPad (6th generation) or later
iPad mini (5th generation)
iPad Air (3rd generation)
On your Mac and iPad, you must sign in to iCloud using the same Apple ID. Here is how:
On your Mac and iPad, Wi-Fi must be turned on. Here is how:
On both devices, make sure that Bluetooth is enabled. Here is how:
Handoff must be turned on your iPad and Mac. To turn on Handoff,
Your iPad and your Mac must be close to each other.
Make sure that your iPad’s and Mac’s software is up to date. Check for updates:
How to update your iPad
How to update your Mac
Two-factor authentication must be enabled.
Sidecar Problems TroubleshootingSo you reviewed everything above, and you’re still having some issues using Sidecar as expected.
Please try each step one at a time until you resolve your issue.
Try moving your iPad closer to Mac and try again.
If you are using a VPN service either on your Mac or iPad, try disabling it and then try again.
Restart your iPad and your Mac.
Force restart your iPad. You can do that by pressing and quickly releasing the Volume Up and then Volume down buttons and then press and hold the power button until you see the Apple logo.
Turn off Handoff on both devices and turn it back on. Here is how:
Reset Network Settings on your iPad. Please note that this will erase your network settings such as your Wi-Fi passwords. Here is how:
Tap Reset Network Settings
On your Mac, turn off Wi-Fi and wait a few seconds and then turn it back on.
Sing out of your iCloud account and then sign back in.
See also: macOS: “WiFi: No Hardware Installed Error”, Fix
Common Error Messages: Unable to Connect to “X’s iPad. The iCloud account does not use two-factor authentication.As the error message implies, you need to turn on two-factor authentication in Settings. Here is how:
Sidecar works but Apple Pencil does not
Is your Apple Pencil unresponsive? it is possible that your Apple Pencil is not being recognized when using it with Sidecar. We wrote an article on troubleshooting Apple Pencil. Please read that.
Unable to play videos in the TV app on your Mac when you’re using the Sidecar featureQuit the TV app and reopen it again.
Poor colors when using SidecarTry turning off True Tone on your Mac. Here is how:
Uncheck the True Tone checkbox.
iPad does not show up in the AirPlay list or there is no Sidecar setting
Make sure that your iPad and your Mac devices are compatible with the Sidebar feature. See the list above.
The device Timed Out.
If you are having issues, you may want to contact Apple.
8 Common Http Errors And How To Fix Them
If you have been a regular Internet user, you will encounter websites with errors. Most of these errors come with an error code that is hard to understand for the average web user. That’s where this guide comes in as we help break down common HTTP errors and what you can do when you encounter them. Let’s dive right in!
What are HTTP Error Codes?Before diving into specific cases, it’s helpful to have a little background on what these codes are and why you receive them. In a non-technical way, HTTP codes are a message that is being sent to a website’s server and back to the browser to indicate whether a request has or can be fulfilled.
There are generally five levels:
1xx: Informational (what is happening when a browser or server request has been sent)
2xx: Success (things are working as intended)
3xx: Redirect (the requested page has moved to a new URL)
4xx: This is a client error that indicates something is wrong with the way your browser, be it Chrome, Firefox, Safari, etc. has asked the website server to see a page
5xx: This server error indicates that something is wrong on the server-side and how it tried to send the website to the browser
With that quick and easy read on what an HTTP error code is, let’s take a look at some of the more common ones you will experience. Keep in mind that these codes are not for anyone with technical knowledge, website managers, etc. How to fix these codes is very much in line with what a typical browsing experience would look like.
What are Some Common Fixes?Before diving into more specific error codes, it’s important to know some of the common steps that you can take to fix any website error you encounter. While not true for all error codes, for the most part, your first act should be to try and refresh the page. It’s entirely possible that something happened while the page was trying to load and a refresh will resolve. Another common fix is to double-check the website address. It is possible that you typed the website URL incorrectly, leaving out or adding an additional number, letter or symbol.
If you have tried both a page refresh and double-checked everything is spelled correctly, clearing your cache is the next best step. Doing so is incredibly easy and it won’t affect your browsing experience. Every browser can have its cache cleared and it takes mere seconds to do so.
1. HTTP Error 401 – Unauthorized (Authorization Required)In an instance where you see this HTTP error code, it likely means that the page you are trying to visit requires a user ID and password. If it’s a page you’ve already logged into and still see the error, it means the user credentials you entered are not valid.
The fix might just require returning back to the main page of the website, locating the login screen, and re-entering your valid credentials. Separately, as is the case with a common fix, try reloading the page, deleting the cache and/or close and reopen the browser and then attempting to log in again. If you are absolutely sure your credentials work and the issue isn’t on your end, reach out to the website administrator for assistance.
2. HTTP Error 403 – ForbiddenWhen you land on a page with this error, it basically means you are on a page you don’t have the authorization to view. There are a variety of reasons you can and will encounter this message but the overall takeaway is “this page is not for you”.
3. HTTP Error 404 – Page Not FoundResolving this issue is as easy as checking that you have entered the URL correctly. Alternatively, try a Google search for the website and see if the page has recently moved. Another possible solution is to move up one directory level in the URL to see if the issue is resolved. For example, if you are going to chúng tôi and you see the 404 error, try again with chúng tôi and see if the error resolves itself.
4. HTTP Error 408 – Request TimeoutWhile not as common, a 408 error means that the website took longer to load than the server was willing to wait. Because of that, the 408 error was provided to the browser. In many cases, the cause is something as basic as typing or loading an incorrect URL. This error is different from a 504 error as that is server specific while 408 is also impacted by the user client.
If and when you see this error, start by checking if the URL is correctly typed. Make sure to watch out for domain name spelling, backslash placement, etc. Does the URL have any particular character strings? Make sure those too are correctly spelled/inserted. Try and search the site via Google, Bing, DuckDuckGo and see if you can find the website this way.
5. HTTP Error 500 – Internal Server ErrorIt’s important to note that errors in the 5xx range are generally based on an issue from the website and/or its server. In other words, the issue isn’t a spelling error with the url. If you see this message, it’s likely that the website encountered some type of unexpected error trying to reach a server.
As indicated above, resolving this error resolves more around the webmaster resolving errors with a server, website code, database, etc. Given that, for the general web user, you have to wait for a fix. It could also be due to high traffic so keep refreshing the page periodically.
6. HTTP Error 502 – Bad GatewayWhen you see a 502 Bad Gateway error, that’s a good indication the issue is server-based and not specific toward your setup. That means no matter which device or operating system you use to try and visit a website, the same error will appear. Generally, this error appears when two servers are not talking to one another. However, in some cases, a 502 error can appear because your browser of choice thinks there is an issue.
To troubleshoot, start by trying to refresh the page. If that fails, the next best option is to try a different browser or a different device. This will help nail down where the problem exists and if something is happening on the user end and not just server-side. Separately, try and reboot your computer to see if that also provides a quick fix. Some online sleuths have nailed down browser extensions as a potential 502 error cause. Because of that, if all else fails, try and disable browser extensions one by one to see if a fix is found.
If you are a website owner and are seeing the 502 error for your website, check out the steps here to fix it.
7. HTTP Error 503 – Service Unavailable (Service Temporarily Unavailable)Whenever you see this message appear as you try to visit a website, you can attribute the cause to meaning that the server is not available at the moment. In most cases, the server might be too busy and suffering under heavy traffic or it could mean routine maintenance is being performed.
Given that the issue is not user-based, you can try to fix it by refreshing the site. As these issues are (likely) temporary, trying the page again a few minutes later is the best way to get on the webpage. Additionally, you can try to restart your modem/router as well as your computer, smartphone, tablet, etc. and see if the same 503 error persists.
8. HTTP Error 504 – Gateway TimeoutShould you see HTTP Error 504, that’s an indicator that the website you are attempting to visit is timing out. Said a different way, the website and its server are not properly communicating so this error appears.
As with the cases above, refresh the site to see if the problem fixes itself quickly. If not, you can try troubleshooting by resetting/starting your router/modem, make sure your DNS settings are set up correctly, etc. If all else fails, contacting the website administrator is likely the next best step.
Frequently Asked Questions 1. Can any of these error pages be customized?Yes! Many website administrators customize their 404 and 5xx series pages with fun or delightful images or messages. As website crashes can impact SEO, utilizing these pages can help make sure the user knows these HTTP errors are temporary and that they should visit again. These pages can be an invaluable tool for website administrators as Google penalizes a website every time it cannot be visited.
2. What about non HTTP error codes?Errors like “Network Connection Refused” or “Unable to Locate Host” is just as common as these numerical errors. The former is something you’ll see if a website is under heavy traffic or undergoing maintenance. Fear not as these issues resolve quickly and you can try and visit the site soon. The latter error is likely the result of the same issue but can also extend to the website not properly talking to its server(s). Check the URL (in both cases) and try again.
3. Should I be concerned if I see these while browsing the web?You shouldn’t be. This article should give you enough understanding so that anytime you see these errors, you know the steps to resolve them. That might include waiting for a fix but even then, that’s helpful to know so you can remember to visit a website again.
David Joz
David is a freelance tech writer with over 15 years of experience in the tech industry. He loves all things Nintendo.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Update the detailed information about How To Troubleshoot Office Activation Problems And Errors on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!