Trending December 2023 # How To Restore Your Mac From A Time Machine Backup In Recovery Mode # Suggested January 2024 # Top 20 Popular

You are reading the article How To Restore Your Mac From A Time Machine Backup In Recovery Mode updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Restore Your Mac From A Time Machine Backup In Recovery Mode

Suppose a software update or an app you installed has corrupted system files and as a result your Mac refuses to start up properly, what do you do?

Those who have planned ahead and created a bootable USB install disk for El Capitan can do a clean install of macOS, and then restore their Mac from the most recent Time Machine backup.

But there’s a better way to deal with such situations. In this tutorial, we’ll educate you on booting into macOS’ Recovery Mode and using the built-in recovery tools to restore your Mac from a Time Machine backup.

Recovery Mode (and its online-based sibling, called Internet Recovery) contains all the tools you need to troubleshoot your Mac, repair disk errors, set a firmware password, restore the computer from a Time Machine backup and more.

Before restoring your Mac because of a problem with your startup disk, you should try to repair the disk with Disk Utility, or replace it, before following these instructions.

How to restore your Mac from a Time Machine backup in Recovery Mode

Make sure your Time Machine backup disk is connected and turned on. If you use a network-attached storage device or Time Capsule as the backup disk for Time Machine, make sure that both the backup disk and your Mac are on the same network.

1) In the Apple menu choose Restart, or power on your Mac.

2) As your Mac restarts, hold down the Command (⌘) – R combination after the startup chime plays and hold the keys until the Apple logo appears.

After a few minutes, the Mac OS X Utilities window should appear.

Tip: If you see macOS’ login window or the desktop, you didn’t press the keyboard combination early enough so restart your Mac and try again.

4) On the next screen, you will be prompted to select between restoring the computer from an external backup disk, a Time Capsule or a network backup disk. Depending on your configuration, do one of the following:

If you’re using a Time Capsule or network-attached storage, you may be prompted to enter the name and password you use to connect to the backup disk.

Tip: To restore your Mac to the state it was in before you installed the new version of macOS, choose the most recent backup that occurred before you installed the macOS update.

5) Select the date and time of the backup you want to restore and follow the instructions. Restoring the entire system can take some time make yourself a sandwich.

After your system has been restored and the Mac starts up, Time Machine will perform a full backup at the next scheduled backup time before incremental backups are resumed.

Using Recovery Mode to restore your Mac from a Time Machine backup will reinstall macOS and restore your personal files. To copy specific files, settings and macOS user accounts in your Time Machine backup to another Mac, use Migration Assistant.

RELATED: How to boot your Mac into Internet Recovery Mode

Is your Mac backed up?

If you have an external hard drive or use Apple’s Time Capsule, you’re wholeheartedly recommended to enable Time Machine in System Preferences. Should your Mac’s startup disk get damaged or is replaced, you will be able to recover your entire system from a Time Machine backup and continue right where you left off without skipping a beat.

Everything you can do in Recovery Mode

Both Recovery Mode and its online counterpart, Internet Recovery, provide the same set of recovery tools which let you accomplish the following maintenance tasks:

How To Backup And Restore?

Introduction to MariaDB Mysqldump

Web development, programming languages, Software testing & others

What is MariaDB Mysqldump?

When using mysqldump in MariaDB, it generates a flat-file format file that contains SQL statements. Execute these statements to restore the database to its state as it was when the backup was created. To use mysqldump, you need the necessary privileges to access the database and its entities, including tables and views.

Use mysqldump

We can use mysqldump on a particular database only provided you have the access privilege of SELECT command on the tables and views of the database that you want to dump and take a backup of. You can dump one or more than one databases simultaneously. You can make use of the following syntax for dumping the database to create a dump file for backup purposes in MariaDB –

For dumping one or more than one database present on the same server –

For dumping all databases present on the server –

For dumping one or more tables of a database, use the below mysqldump syntax –

Fire the above command on the MariaDB shell or command prompt. Let’s discuss in detail the terminologies used in the command above:

Database name – This represents the database name for which you want to take the backup.

sampleBackupFile – The name which you want your dump file to have. Note that it should have the extension of .sql only.

To obtain complete details about the options used in the above syntax, you can execute the following command on the command prompt:

Mysqldump -u root p -help that generates the output shown in the below image –

As you can observe from the above output, the list of the options used for specifying additional information that can be specified in mysqldump is huge; we can even go for exporting the same in a new file which can be done by making use of the below command on command prompt –

The file created with name temp looks as shown below after opening –

To restore the data that is backup by using the mysqldump command, we can make use of the restore command, whose syntax is as shown below –

MySQL name of database < name of backup file.sql

name of the database is the database you want your data to restore.

Name of the backup file – The file created using the mysqldump command.

How to Backup and Restore?

Let us now understand how we can implement backup and restore by using the mysqldump command with the help of one example. We have one database named educba, which contains the table named developers stored in it. This table has some records. To check the complete contents of the developer’s table, let us fire the select query on the developer’s table –

Select * from educba.developers;

Note that we have already executed the educba; command to ensure our current database is educba. We can see that the developer’s table contains the following rows as its contents –

Consider that we have to take the backup of the educba database having only one table developer in it. You can achieve this by utilizing the following mysqldump command:

When you execute the above command, it will generate the following output on the terminal and create a file named “backupOfEducba.sql”. This file will contain all the commands required for restoring the database:

After opening the chúng tôi file, you can observe the following contents in it –

Let us now see how we can restore the data on any other database with the help of the dump flat file generated from the mysqldump command and restore command. Create the database named educba in a new server. Fire restore command. Our statement will be as shown below –

mysql -u root -p <backupOfEducba.sql

The output of the execution of the following command is as shown below –

After that, we can confirm the existence of the same tables in the educba database that we have created in a new database.

Conclusion

MariaDB mysqldump command is used to backup existing databases or databases and restore them when needed in case of data loss due to unavoidable circumstances.

How To Turn On Stealth Mode In The Firewall On Your Mac

If your Mac is connected to the Internet or a network, there may be a number of attempts being made by others to see who is connected to the network. If you would like to remain invisible and would prefer that your Mac not be detected when a discovery attempt takes place, you can use an option located in the Firewall app on your Mac that makes it literally invisible on the network so any discovery attempts cannot find it.

The option that I am talking about is called Stealth Mode. It lets you make your Mac a little more secure by not letting it respond to any discovery attempts.

You do not need a third-party app as the feature is available right within the Firewall app. Here’s how you can use it.

Turning on Stealth Mode

7. Stealth Mode should now be enabled.

From now on your Mac will not respond to any discovery attempts that take place on the Internet or on your network, and those people pushing the attempts wI’ll not be able to find your Mac provided the Stealth Mode remains enabled.

For network troubleshooting or any other reason, if you wish to turn off Stealth Mode, you can do so by going into the Firewall Options and unchecking the checkbox that you selected in the previous steps.

Conclusion

Keeping your Mac safe is a top-most priority task, and if you are concerned about it, you can enable the above little feature that takes care of any attempts to find your Mac on the network you are connected to. All attempts to find your Mac will be in vain!

Mahesh Makvana

Mahesh Makvana is a freelance tech writer who’s written thousands of posts about various tech topics on various sites. He specializes in writing about Windows, Mac, iOS, and Android tech posts. He’s been into the field for last eight years and hasn’t spent a single day without tinkering around his devices.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Boot Into Sony Xperia Z2 Recovery Mode

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on Android devices is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you choose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The recovery installed on your device may not be touch-friendly. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your Xperia Z2 in recovery mode. The most handy (and hardware coded) method is about pressing a particular hardware button a couple of times while booting up your Xperia Z2. Others are software based, let’s have a look at them below.

NOTE

Sony Xperia devices don’t ship with a pre-installed recovery. So unless you’ve installed a custom recovery like CWM or TWRP on your device, you won’t be able to boot into recovery mode.

1) Boot into Xperia Z2 Recovery Mode Using

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed on this page.

Switch off your Xperia Z2 first

Switch it back on and the time when you see your phone’s LED notification light turn Pink! (or any other color) — start pressing either the Volume UP or Volume Down key a couple of times to make your phone boot into recovery mode

Once you’re in recovery mode. Use Volume buttons to navigate Up and Down between options and Power button to select an option in recovery.

[ad1]

2) Boot into Xperia Z2 Recovery Mode Using

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot into recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device.

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC.

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode only uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Xperia Z2 Recovery Mode Using

Quick Boot (Reboot) APP

Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

How To Boot Into Karbonn Titanium Octane Plus Recovery Mode

What is Recovery?

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.

There are multiple methods to boot your Karbonn Titanium Octane Plus in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Karbonn Titanium Octane Plus . Others are software based, let’s have a look them below:

1) Boot into Karbonn Titanium Octane Plus Recovery Mode Using

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

Power off your device and wait 4-5 seconds after lights go off.

└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.

[ad1]

2) Boot into Karbonn Titanium Octane Plus Recovery Mode Using

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Karbonn Titanium Octane Plus Recovery Mode Using

Quick Boot (Reboot) APP

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

How To Boot Into Samsung Galaxy Mega 6.3 Recovery Mode

A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.

There are multiple methods to boot your Galaxy Mega 6.3 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Galaxy Mega 6.3. Others are software based, let’s have a look them below:

1) Boot into Galaxy Mega 6.3 Recovery Mode Using

HARDWARE BUTTONS

This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.

└ This is completely optional. You can choose to keep the device switched On if you wish to

Press and hold ‘Volume Up + Home + Power’ buttons together and release them as soon as you see the Galaxy Mega 6.3 logo on your phone’s screen.

Your phone will boot into recovery mode. Use Volume buttons to navigate Up and Down between options and use Power button to select an option in recovery.

[ad1]

2) Boot into Galaxy Mega 6.3 Recovery Mode Using

ADB

[ad1]

ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.

And make sure you’ve proper drivers installed for your device. You can download driver from this page →

Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer

Prepare your phone

Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options

Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)

└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →

FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:

adb reboot recovery

If you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.

3) Boot into Galaxy Mega 6.3 Recovery Mode Using

Quick Boot (Reboot) APP

ROOT ACCESS REQUIRED

Open the app and grant Root Access

Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode

That’s all.

Update the detailed information about How To Restore Your Mac From A Time Machine Backup In Recovery Mode on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!