Trending March 2024 # How To Limit Battery Charge In Windows 11/10 # Suggested April 2024 # Top 10 Popular

You are reading the article How To Limit Battery Charge In Windows 11/10 updated in March 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Limit Battery Charge In Windows 11/10

In this article, we will see how to limit Battery Charge in Windows 11/10. Laptop batteries wear out before any other component does. The reason for this is overcharging. Overcharging occurs when you charge your battery after it is charged to its full capacity. In simple words, charging a battery beyond 100% is overcharging. In a Lithium-ion battery, overcharging causes thermal runaway and increases pressure which creates an unstable condition inside the battery. This decreases the lifespan of the battery. Lithium-ion batteries are most widely used in laptops. Overcharging in a laptop occurs when you forget to remove the charger after your laptop is fully charged. Overcharging can be avoided if you limit the battery charge after a certain percentage.

How to limit Battery Charge in Windows 11/10

To limit the Battery Charge in your Windows 11/10 computer, you can install some free Battery Limiter software. These Battery Limiter software do not cut off the charge when your battery crosses a particular charging level. Instead, they remind you to turn off the charger when your laptop battery crosses a certain charging level or percentage.

To help users increase the battery life of their laptops, some laptop manufacturers have included a feature to limit the battery charge in hardware. You can access these settings directly from your system BIOS. But, everyone is not tech-friendly. Hence, accessing the system BIOS settings without proper knowledge can lead to critical damage to the system. Therefore, some laptop brands have also developed apps that users can use to access the hardware level settings without entering the BIOS.

Here, we will see the process to limit battery charge in the laptops of the following brands.

HP

Lenovo

Dell

ASUS

Acer

Microsoft

Let’s see how to limit the battery charge in these laptops.

1] How to limit Battery Charge in HP laptops

You can limit battery charge up to a certain percentage on your HP laptop by configuring the BIOS settings. The steps to do so are as follows:

Shut down your computer.

Wait for a few seconds.

Power on your computer and immediately start pressing the Esc key until you see the Startup Menu.

Press the F10 function key to enter your system BIOS.

After entering the BIOS, select the System Configuration tab by using the arrow keys.

You will see the Battery Care Function option. Highlight it by using your arrow keys and press Enter to change its value.

By default, the Battery Care Function is set to 100%. You have to change it to 80%.

Save the changes and exit BIOS.

2] How to limit Battery Charge in Lenovo laptops

Lenovo laptop users can use the Lenovo Vantage app from Microsoft Store to limit Battery Charge. It lets you set different battery thresholds to start and stop charging. The steps to limit battery charge in Lenovo laptops via the Lenovo Vantage app are written below:

Install the Lenovo Vantage app from Microsoft Store.

Scroll down and navigate to the Battery Settings section.

Turn on the Battery Charge Threshold button.

After setting the percentage values, your laptop battery will start getting charged when the power goes below the value you entered in the former option and stop getting charged when the power exceeds the value you entered in the latter option.

3] How to set a battery charging limit in Dell laptops

Like Lenovo, Dell also has an official app that lets users limit the battery charge on their Dell laptops. You can install Dell Power Manager from Microsoft Store. After installing the Dell Power Manager, follow the steps written below to limit the battery charge on your Dell laptop:

Open the Dell Power Manager app.

Select Battery Information from the left side and then open your battery settings.

When the Battery Settings window appears, select Custom from the left side.

Move the sliders to set a limit to start and stop charging your laptop battery.

4] How to set a battery charging limit in ASUS laptops

ASUS also has an official app named MyASUS. It is available on Microsoft Store. When you open the app for the first time, you have to sign into the app using your ASUS Member account. After signing into the ASUS app, follow the instructions written below to set a charging limit for your battery.

Select the Customization category from the left side.

Select the Power & Performance tab.

Select the desired option under the Battery Health Charging section.

The Battery Health Charging section has the following three options:

Full Capacity Mode: It is the default setting for your ASUS laptop battery. When this setting is enabled, your laptop battery will be charged up to 100%.

Balanced Mode: If you select this setting, your laptop battery will stop charging when the power goes above 80% and resume charging when the power goes below 78%.

 Maximum Lifespan Mode: The Maximum Lifespan Mode stops charging your laptop battery when the power goes above 60% and resumes charging your laptop battery when the power goes below 58%.

If you do not find the Battery Health Charging option under the Power & Performance section, visit the official website of ASUS to check if your laptop model supports this feature or not.

5] How to limit Battery Charge in Acer laptops

You can set a charging limit for your Acer laptop battery via the Acer Care Center. Acer Care Center is an app developed by Acer. The steps to download the Acer Care Center app are as follows:

Visit Acer Drivers and Manuals page.

Search for your laptop by entering your model number or serial number.

The files will be downloaded in zip format. Extract the zip folder and run the exe file to install the app.

Go through the following instructions to set a maximum charging limit for your Acer laptop battery.

Launch Acer Care Center.

Select the Checkup category from the left side.

Turn the button on.

After performing the above steps, your laptop battery will stop getting charged when the power exceeds 80%. The Acer Care Center app does not have an option to set a custom value for the battery charge limit.

6] How to set the maximum charging limit for the battery in Microsoft Surface devices

Microsoft has introduced a Battery Limit feature in Surface devices. You can enable the Battery Limit feature in Surface devices from UEFI. After enabling this feature, your Surface device battery will be charged up to 50% of the total capacity.

Read: Laptop Battery Usage Tips & Optimization Guide for Windows 11/10.

How do you set a battery limit?

You can set a battery limit on your laptop by configuring the BIOS or UEFI settings. Some brands have developed an app that lets users set the battery charge limit without entering the system BIOS or UEFI. In this article, we have explained the method to set a battery limit on laptops of some popular brands.

How do I change charging settings in Windows 11?

In Windows 11, there is no such option that lets you set a charging limit to start and stop charging your laptop battery. If you want to change charging settings and set a charging limit for your laptop battery, you have to change the required settings in your system BIOS. or install the dedicated app developed by your laptop manufacturer.

I hope this helps.

Read next: How to fix Battery drain issues in Windows.

You're reading How To Limit Battery Charge In Windows 11/10

Windows 7 To Windows 10/11: In

Windows 7 to Windows 10/11: In-place upgrade vs. clean install

313

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Windows 7 is now very near to its January 14, 2023 end of support date. From then on, Microsoft will stop rolling out security patch updates for that platform. This leaves users wondering if they should upgrade from Windows 7 to 10.

Those users who choose to upgrade to Windows 10 can do so in two alternative ways.

You can upgrade to Windows 10 with an in-place upgrade. That is a more direct approach which preserves all files, software, and settings from the previous OS installation. Therefore, it’s more like installing Windows 10 over a previous OS as it migrates everything from the old platform to the replacement one.

Or you can opt for a clean install of Windows 10. That’s a less direct method which effectively wipes the hard drive clean and then installs Windows 10. Therefore, it removes all user files and installed software during the upgrade process.

For all the important info that you need about Windows 7 to 10 migration, check out this FAQ page that will answer all your questions.

It’s quicker and easier

A lot of users prefer to migrate to Windows 10 with the in-place upgrade method. An in-place upgrade is the more straightforward way to migrate from Windows 7 to 10.

You don’t need to flap around with setting up bootable installation media for a clean install. In addition, you might also need to configure the boot order with BIOS or UEFI settings to ensure the desktop or laptop boots from USB drive for a clean install.

It preserves settings, programs, and files

As an in-place upgrade will preserve your software and files, it’s not so essential to back up anything before upgrading. That will also save you more time. Furthermore, you won’t need to get any external storage device to back up the hard drive’s content to.

Want to transfer your installed programs from Windows 7 to Windows 10? Check out this handy guide for more info.

It provides a fresh start

However, some users might still prefer to upgrade to Windows 10 with the clean install method. A clean install can provide a completely fresh start.

You’ll get a completely new and fresh Windows 10 with a clean registry when you upgrade with a clean install. Upgrading with in-place upgrade will leave old registry entries and other junk from the previous platform intact.

It will remove incompatible software

Expert tip:

Thus, you won’t need to uninstall all the incompatible software yourself. You can selectively back up and restore all your most essential software and files, which will leave out potentially incompatible programs.

It provides more control over the upgrade process

The clean install method gives you more control over the upgrade process. You can make adjustments to drives and partitions when upgrading with installation media.

Users can also manually back up and restore the folders and files that they need to migrate to Windows 10 instead of migrating everything. So, upgrading with a clean install is more flexible.

Looking for Windows 7 to Windows 10 migration resources? Take a look at this article to find everything you need.

Check out the Media Creation Tool

However you choose to upgrade, Windows 10’s Media Creation Tool will come in handy. With that utility, you can carry out an in-place upgrade by selecting its Upgrade this PC now option.

Alternatively, you can select its Create installation media option to set up a bootable USB flash drive for a clean Windows 10 install.

If you need any additional information about the Media Creation Tool, don’t hesitate to check out this detailed guide and learn everything about it.

So, now it’s time to upgrade to Windows 10. If you don’t have sufficient external storage devices for a clean install, then you’ll have to opt for the in-grade upgrade method.

However, some users who do have enough external storage for both the installation media and system backup might prefer the clean install method that will remove a lot of clutter.

RELATED ARTICLES TO CHECK OUT: 

Was this page helpful?

x

Start a conversation

How To Open Component Services In Windows 11/10

There are multiple ways to open Windows Component Services in Windows 11/10, and here we have listed almost all the methods. For example, you can use Command Prompt, Taskbar search box, File Explorer, Control Panel, etc., to open this utility on Windows computers.

How to open Component Services in Windows 11/10

To open Component Services in Windows 11, follow any one of these methods:

Using Run prompt

Using Taskbar search box

Using Control Panel via Windows Tools

Using Windows Terminal

Using File Explorer

To learn more about these methods, keep reading.

1] Using Run prompt

Whether you want to open the Component Services or any other utility on your Windows computer, the Run prompt is always there. Using the Run prompt to open the Component Services is probably the easiest method so far included in this list. As it includes a keyboard shortcut, you can open the in-built utility within moments. In order to open the Component Services in Windows 11/10 PC using the Run prompt, you need to display the Run prompt first.

To open Component Services in Windows 11/10, press the Win+R keyboard shortcut to open Run, and then, you can enter this command dcomcnfg or  chúng tôi . and hit Enter button.

2] Using Taskbar search box

Component services

dcomcnfg

dcomcnfg.exe

3] Using Control Panel via Windows Tools

Although the Component Services utility is a part of the Control Panel, you cannot find the direct option to open it on your PC. That is because it is hidden inside Windows Tools. On the other hand, Windows Tools is built with several administrative tools such as Character Map, Component Services, Disk Cleanup, Event Viewer, etc. Therefore, if you open Windows Tools, you will be able to open the Component Services as well.

To open Component Services via Windows Tools, follow these steps:

Search for control panel in the Taskbar search box.

In case you cannot find the Windows Tools menu after opening the Control Panel, change the view to Large icons.

4] Using Windows Terminal

Windows Terminal is mainly used to access Command Prompt and Windows PowerShell. In other words, you can use these two utilities to open the Component Services as well. That said, if you do not want to open the Windows Terminal, you can also use the standalone Command Prompt and Windows PowerShell as well.

To open Component Services using Windows Terminal, follow these steps:

Press Win+X to open the WinX menu.

Select Terminal option.

Enter this command: dcomcnfg

No matter whether Terminal opens Windows PowerShell or Command Prompt instance, the command remains the same.

Read: How to open Windows Tools in Windows 11

5] Using File Explorer

It is the last method you can use open Component Services on your Windows 11 computer. However, there are two ways to open the File Explorer to open Component Services. First, you can search for the app. Second, you can navigate to a specific path to find the utility.

Using search method:

Using folder navigation:

In this case, open File Explorer and navigate to this path:

C:WindowsSystem32

How to find Component Services?

As stated earlier, there are multiple ways to find Component Services in Windows 11, and all the methods are mentioned above. For example, you can use the Taskbar search box to find it directly. Alternatively, you can use the dcomcnfg command in the Windows Terminal. Apart from that, you can use the same command in the Run prompt as well.

Read: How to hide or disable Administrative Tools in Windows.

How To Rename A Printer In Windows 11/10

This post will show you how to rename a printer in Windows 11/10. By default, whenever you install a printer, Windows 11/10 automatically set its name based on printer series, model number, and manufacturer.

If you ever feel the need to change the printer name, then it can be done using built-in options available in Windows 11/10. This post covers all those options with step-by-step instructions to rename a printer including the built-in virtual printer known as Microsoft Print to PDF. You can change the name of a Printer in Windows 11/10 using Settings, Control Panel, PowerShell, or Command Prompt.

How to rename a Printer in Windows 11/10

In this post, we have shown you four ways you can change the name of the printer in Windows 11/10:

Using the Settings app

Control Panel

Windows PowerShell

Command Prompt

1] Rename a Printer using the Settings app

Here are the steps for Windows 11 users:

Press Win+I hotkey to open the Settings app

Select a printer

In the Printer Properties window, go to the General tab

Again, go to the General tab

Add printer name in the field available just next to the printer icon

That’s it! Now when you will access Printers & scanners page or the Devices and Printers section, you will see the new name of that particular printer. In the same way, you can use the above steps to change the name of other added printers.

Here are the steps for Windows 10 users.

The settings app contains a separate page for Printers & scanners. You can access that page and then proceed further to rename a printer.

To Rename a Printer using the Settings app:

Open the Settings app using Win+I shortcut key

Access the Devices menu

Select the Printers & scanners page.

On the right-hand side, you will see the list of available printers and scanners.

Select a printer of your choice and then press the Manage button.

Under Manage your device section, use the Printer properties option.

This will open the Properties window of that printer with General tab.

There you will see the name field.

Now you can enter any name you prefer and Apply and save the changes using OK button.

2] Rename Printer name using the Control Panel in Windows 11/10

To Rename a Printer using the Control Panel:

Type control panel in Windows Search box and press Enter.

Under Control Panel, change View by mode to Small icons or Large icons.

Select the Devices and Printers option.

All the installed printers will be visible to you.

The Printer Properties box will open with General tab. In the name field, enter the desired name, and save it.

Your printer’s name will be changed successfully.

3] Change the name of a Printer using PowerShell in Windows 11/10

Windows PowerShell lets you rename a printer using two simple commands.

First of all, you need to open an elevated PowerShell.

Now, get the list of installed printers using the following command:

The name of all printers will be visible to you. Copy or remember the name of the printer you want to rename.

Now, you need to run a command that will contain the new name and the old/current name of your printer, just like the second command highlighted in the image above. The command is:

Rename-printer -NewName “New Name of Printer” -Name “Current or Old Name of Printer”

This will change the name of that printer immediately.

4] Change Printer name using Command Prompt in Windows 11/10

Command Prompt also helps you rename a printer with two simple commands. In the first command, you can see the names of all available printers. And, the second command uses a VBS script to rename a printer.

In the first step, you have to run the Command Prompt as an administrator.

After that, open the list of printers using this command:

wmic printer list brief

Now you know the printer name that you want to rename. Move to the second step.

Execute the following command to rename your printer:

Cscript C:WindowsSystem32Printing_Admin_Scriptsen-USprncnfg.vbs -z “New Name of Printer” -x -p “Current Name of Printer”

Just add a new name and existing name of your printer in the command and it will rename that printer.

This is how you can rename a printer in Windows 11/10.

All the options and steps are pretty simple. Use any option you like and change the default printer name to the custom name of your choice.

How do I rename my printer?

Whether you want to rename your printer in Windows 11 or Windows 10 computer, both the Windows OS has some built-in options to rename a printer. Among those options, the Settings app option is pretty easy. And, we have also covered all the steps in this post to rename a printer using the Settings app for Windows 11/10.

If you want, you can also use other options like CMD, Control Panel, and Windows PowerShell to rename a printer. All these options are also covered above in this post.

How do I rename a printer on the print server?

Now read: How to rename a Bluetooth device.

How To Fixerrors On Windows 10/11

How to fix chúng tôi errors on Windows 10/11

635

Share

X

This

windows system32 winload efi error code 0xc00000f

usually occurs when users launch an app after installing the latest Windows updates.

Fixing the chúng tôi

error

code requires you to boot from the

Windows 10

Installation Media disk and follow the steps from our guide below in the order they are described.

Although they are a bit scary, there are no system errors that we can’t solve. Just find the right solution for you in our System Errors section. 

If you have a Windows 10 error, you’re not alone. We are right by your side with our Windows 10 errors hub.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Sometimes, Windows 10 users may get the error message The application has failed to start because its side-by-side configuration is incorrect.

Please see the application event log or use the command-line chúng tôi tool for more detail.

Users also reported other similar errors caused by the same problem and luckily have the same solution:

– required file is missing or contains errors winload efi

This error usually occurs when users launch an app after installing the latest Windows updates. So, basically when you have these sorts of issues, you might want to try a system refresh or a system restore.

The only issue is that when users try to perform a system restore or refresh, they get the winload.efi file error.

Fixing the chúng tôi error code requires you to boot from the Windows 10 Installation Media disk and follow the steps listed below in the order they are described.

Also, if you do not have an installation media disk for Windows 10, follow the last method listed in this article to get your system up and running.

How can I fix Windows 10 chúng tôi errors? 1. Refresh your PC

Insert the 10 Installation Media disk into the device.

Reboot the operating system with your Installation Media CD or DVD inside the device.

After the reboot, you will get to a screen where it asks to press any key to boot from the CD or DVD.

Press any button on the keyboard.

You should now have in front of you a window where you need to select the correct time and keyboard type.

Press the Next button after you set the time and keyboard type.

You should now have in front of you the Choose an option screen.

Select the Troubleshoot feature you have on that menu.

From the Troubleshoot menu, select the Refresh your PC option.

Follow the on-screen instructions to complete the System Refresh.

Reboot your operating system.

Check again if you still get the winload.efi error.

2. Run System Restore

Note: Before attempting this step, please create a backup copy of your files and folders.

Start Windows 10 normally.

Move the mouse cursor over to the upper right side of the screen.

From the menu that appears, select the Search feature

In the search dialog box, enter control panel without the quotes.

After the search has finished, select the Control Panel icon (it should be the first result).

In the Control Panel search box situated in the upper side of the window, enter Recovery.

Press the Enter key on the keyboard.

After the search has finished, select the Open System Restore feature.

Follow the on-screen instructions to finish the System Restore and bring back your operating system to a previous point in time when you did not have the chúng tôi error message.

3. Create your own Windows 10 Installation Media

If you do not have a Windows 10 Installation Media disk, follow the steps below.

4. Disable Secure Boot

Expert tip:

For more information on how to disable this feature, go to your device manufacturer’s website. The UEFI UI is different for every computer mode.

Once you have located and disabled the UEFI setting, exit the user interface, and restart your computer.

5. Check your disk for errors

Disk errors and faulty files may also trigger the winload.efi error code. The quickest and safest way to fix this problem is by checking for disk for errors. Here are the steps to follow:

If you do not use the /f parameter, chkdsk displays a message informing your that the file needs to be fixed, but it does not fix any errors.

To repair physical issues, run the /r parameter as well.

6. Disable antivirus/ firewall protection

If nothing worked, try disabling antivirus and firewall protection to see if this workaround can fix your problem.

Don’t forget to turn your antivirus and firewall back on as soon as you launched the problematic app.

There you have a few methods to fix your chúng tôi error code in Windows 10.

Still experiencing troubles? Fix them with this tool:

SPONSORED

Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?

x

Start a conversation

How To Open File With No Extension In Windows 11/10

Every file that we have saved on our computers has a particular extension. The file extension is added at the end of the filename followed by a dot (.). It tells the operating systems about the structure of the file so that the OS could select the right software or application to open that file. You might have seen some files on your computer that do not have any file extension or file type. How do you open such types of files? In this article, we will see how to open a file with no extension in Windows 11/10.

When it comes to opening a file on a Windows OS, there are three ways that a user can try:

Select the file you want to open and hit Enter.

To open a file, you should have the right program installed on your system. For example, if you want to open an Excel file, you should have a program that supports the excel file, like Microsoft Excel, Apache Open Office, Libre Office, etc. If you want to open a PDF file, you should have a PDF reader or a web browser to open the PDF file.

What if you come across a file with no extension? In this case, none of the above three methods work to open that file. To open the files with no extensions, first, you have to identify their extension or type. After identifying their extension, install the right program on your computer to open that file.

If you view the properties of the file with an unknown extension, you will see File as its file extension.

How to open a file with no extension in Windows 11/10

There are some free file identifier tools that let you know the extensions of the unknown file types. We have listed some of these tools below.

FILExt

File Identifier from Toolsley

CheckFileType Online

Detect File Type

Online TrID File Identifier

Let’s see how to use these free file identifier tools.

1] FILExt

Read: Free Universal File Viewer software for Windows.

2] File Identifier from Toolsley

3] CheckFileType Online

CheckFileType Online is one more free file identifier tool on this list that lets you find the file extension. Using this tool is simple. To use this tool, follow the below instructions:

Visit CheckFileType Online official website, chúng tôi .

Read: Files and folders suddenly disappeared in Windows.

4] Detect File Type

The Detect File Type tool is available on chúng tôi .

5] Online TrID File Identifier

Online TrID File Identifier is available on chúng tôi . This free tool is also available as a standalone installer. You can download it and install it on your system.

These are some of the free online file identifier tools that will help you identify the file type or extension. After knowing the file extension, you can easily download and install the appropriate software or search for the online tools to open that file.

This site allows users to drag and drop a file onto the site’s home page to identify the file’s type. chúng tôi not only identifies a file’s type, but tells a user what programs they can use to open the file.

Read: You have been denied permission to access this folder.

How do I enable file extensions in Windows 11?

To show file extensions in Windows 11, you just have to change the view mode in File Explorer. The steps are as follows:

Open the File Explorer.

After selecting the Details view, you will be able to see the file extensions in the Type column.

If you do not want to change the view mode in File Explorer, you can enable the file extension by following the below-listed steps:

Open File Explorer.

Select the View tab and uncheck the Hide extensions for unknown file types option.

After that, Windows 11 will show the file extensions in every view mode you select.

How do I enable file extensions in Windows 10?

The methods to enable file extensions in Windows 10 are the same as in Windows 11 but the steps are a bit different in both of these operating systems. You either have to change the View mode or turn off the Hide file extensions option.

Another way to enable the file extensions is turning off the Hide file extensions in Folder Options. The steps are as follows:

Open the File Explorer.

Now, select the View tab and uncheck the Hide extensions for unknown file types option.

I hope this helps.

Read next: How to create a file without Extension in Windows.

Update the detailed information about How To Limit Battery Charge In Windows 11/10 on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!