Trending March 2024 # How To Get Water Out Of Charging Port? # Suggested April 2024 # Top 4 Popular

You are reading the article How To Get Water Out Of Charging Port? updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Get Water Out Of Charging Port?

Did you accidentally spill water on your phone or drop it in water? Happens to a lot of us. These days, water-resistant devices are more popular than ever, but they’re still not immune to water damage. Especially if the charging port is moist, any device can malfunction. 

Even if you’re unaware of how water got into your charging port, most smartphones give you a liquid-detection alert. Luckily, there are some easy ways to get your phone or tablet dry as quickly as possible. So, let’s quickly jump into how to get water out of the charging port on all devices. 

Charging your phone when the port is still wet can lead to unwanted consequences. Hardware components, like the pins and the cables, can get damaged. As a result, your charging cable or the port may stop working.

Additionally, you might also get electric shocks while trying to charge your phone.

However, if you accidentally charged your phone and are worried, you can check the IP rating of your phone.

Ingress Protection denotes how effective your phone is in terms of water resistance and dust particles.

There are two numbers in the rating, for instance, IP68. The first number represents the level of protection against solid particles, and the second number refers to liquid. The more the numbers, the better the protection.

So, the ideal IP rating is IP68, as it refers to full protection against both dust particles and liquid. If your phone is either iPhone 12 or Samsung Galaxy S21, you can rest assured as both phones have IP68. Nevertheless, such phones cannot continue functioning properly while being immersed in water for an average of more than 30 minutes.

If you just dropped your phone in water or somehow got the port wet, firstly don’t panic. There are ways you can save your phone from serious damage quickly. Carefully follow these steps: 

Important Note: Always wear gloves while dealing with issues around the charging ports, cables, and plugs. Do not use any sharp objects to apply pressure into the port. This is to ensure you don’t get any electric shocks or accidentally damage the charging port.

Firstly, shut down your phone and give it a gentle tap to get the excess water out. We can now proceed to further solutions.

First, you’ll need to get rid of the moisture. You can do this by taking a tiny piece of soft cotton cloth. Now, gently try to clean the charging port by rubbing the cloth inwards.

Then, you can let your phone dry on its own for up to half an hour or more. Be sure to not apply a lot of pressure as it can push the water inside the port. 

One most effective method is to let the phone dry naturally. Usually, the water inside the port will evaporate in a few hours. While you’re doing this, make sure you’re keeping the phone upright. Also, it’s best to place your phone in an area where it’s well-ventilated. 

If your phone is not charging with a cable despite using the methods above, try using a wireless charger. However, we recommend making sure the phone and the wireless charger are dry before charging. 

If the above solutions didn’t work and you believe the charging port is damaged, you can try contacting customer care service. For Samsung users, you can contact their Support page, or you may even visit their walk-in service center. If you have an iPhone, you can contact the Apple Support page. 

You may even take your phone to a local repair center if your phone is not turning on after trying the fixes above. 

It’s natural to panic and take quick measures when trying to save your phone from water damage. But not all tricks work the same. Let’s look at some of the don’ts while trying to dry your phone.

It’s common to believe it’s a good idea to let your phone evaporate in the sun. However, prolonged sun exposure can cause permanent damage to your phone. Your phone’s battery can overheat, and the hardware components, like the miniature circuit board, can get damaged. Additionally, your phone’s screen might also crack due to the high temperature. 

Placing your phone inside dry rice overnight is an old method to dry your phone. However, it doesn’t always work properly. Tiny dirt particles in the rice or even the rice grains can get inside the charging port. Instead, you can use other methods above or place silica gel sachets near the charging port. 

Using cotton swabs to get rid of excess moisture from your phone may seem ideal, but it’s not. Rubbing the swab in the port can get the tiny cotton dust particles inside. The swab may also push the water further inside. 

If you use a paper towel inside a wet charging port, the towel will also get wet, and it can get inside the port. It’ll be difficult to take out wet tissue particles from the port. So, it’s best not to use this method. 

Using a vacuum hose might get some water out, but the air pressure can interfere with the internal components inside your phone. Additionally, a vacuum hose can’t get rid of other liquid dirt from the port. 

A hairdryer blows the air directly inside the charging port of your phone. This will push the water further inside, which can cause more harm than good. You can instead just use it diagonally at the lowest speed and in a cold air setting. 

If you’re unsure what to do, you might feel like letting your phone sit for extended periods of time, like a few days. However, this can lead to a problem called Corrosion. It is the slow damage to electronic components due to environmental changes. It might take up to a few weeks to notice symptoms of corrosion on your phone. 

Shaking the phone will not get rid of the moisture. Instead, it might push the water further inside the charging port. This can cause more damage, and it might take more time to dry your phone. 

Any sharp objects, like a toothpick, can cause more damage inside the charging port. So, it’s best not to use toothpicks even if you wrap cotton around them. 

As mentioned above, if you notice symptoms of corrosion on your phone, it signifies that it’s too late to apply simple solutions. Since corrosion causes permanent damage, it might be difficult or costly to fix your phone. 

If you’re no longer getting moisture or liquid detection alerts on your phone, you can figure that your phone is completely dry. Additionally, if you’re not noticing any minor glitches, your phone is completely dry. 

If you can confirm that your phone is completely dry, but you are still getting liquid detection alerts, here’s how you can fix it. 

You can also simply turn off the moisture notification from your settings. Here’s what you’ll need to do: 

Power Cycling is like a hard reset option. It’s a method of shutting down and restarting the phone’s hardware. You can do this by simply switching off your phone, waiting at least one minute, and then powering it on. 

You can always fix minor bugs, like false alerts on your phone, by updating the OS. Simply check and install any available software updates. 

There’s a chance you might get false alerts if there’s water in your charging cable or if it’s damaged. So, just switching to another charging cable might prevent your phone from giving you such alerts. 

If you’re still getting moisture alerts even after power cycling, you can restart your phone on Safe Mode. 

On Android

Shut down your phone and let it be for a few seconds. 

Hold the power button again for 2-3 seconds. You’ll get a pop-up option to confirm rebooting in Safe Mode. 

Tap on OK. 

On iPhone

Turn off your iPhone. 

Turn on your iPhone and when it’s lighting up, hold down the Volume Down button until you see the Apple logo. 

When the phone is booted, it goes in Safe mode. 

If there are still dirt particles or rust inside the port, you might get false moisture alerts. You can use flashlight to look into the port.

If most solutions aren’t working, you can try performing a full factory reset on your phone. However, please note that this will clear all your data. So, it’s best to make sure you have backed up all your data. Since this step can be risky, please try this method at the end. 

On Android

Please note that the settings may differ depending on your current Android version. 

On iPhone 

If the above solutions are not working, you can try replacing the charging port. You can do this at a local electronics repair shop. 

If your phone is now dry and working fine but there’s no sound, there might be a problem with the speakers. Check if there’s water in the speaker area. You might also not hear any sound if it’s connected to another device via Bluetooth. 

You can also check the volume level and whether it’s in Do Not Disturb mode. Alternatively, try rebooting your phone. If nothing is working, you can get your phone repaired at a local electronics shop. 

Firstly, turn off your phone and take it indoors where it’s warm. Then, with a clean, soft towel, get rid of the excess snow. You can then try the methods above to remove moisture and dry your phone. Alternatively, you can also take it to a local electronics shop. 

If none of the solutions are working and your phone doesn’t seem to turn on at all, it’s best to call for help. A dead phone after such accidents signifies that there’s been serious damage. You can take your phone to any local repair shop or contact the respective Support page of your phone’s brand. 

You're reading How To Get Water Out Of Charging Port?

How To Get Water Out Of Your Iphone

Our smartphones go everywhere with us, and lots of the places we go are wet! If you have water in your iPhone, you can do a few things to rectify the situation.

Liquid exposure isn’t the immediate death sentence it used to be, but it can still wreck your phone. Here’s what to do when things get splashy.

Table of Contents

Water Resistant Doesn’t Mean Waterproof

Before we get into how to deal with water in your iPhone, let’s clarify what your iPhone is designed for regarding water resistance. The first iPhone to get an IP (Ingress Protection) rating was the iPhone 7. That doesn’t mean that older iPhones didn’t have some measure of water resistance; it’s just that they were not tested and certified. Apple makes no promises about models older than the iPhone 7.

Some manufacturers add additional resistances under the rating, the time duration can be much longer, and depths are generally up to 9.8ft. If your iPhone has an IP68 rating, look up the specific resistance specifications for that model.

The water resistance rating applies to a new iPhone in perfect condition. Wear and tear on the device can compromise its IP rating. If your phone’s been dropped a few times, bent a little in your pocket, and has small cracks anywhere, that may give water a way inside.

Not All Liquids Are Equal

Apart from your phone being water resistant rather than waterproof, the type of “water” also matters. When the certification tests are done, it’s with water that’s quite pure. That’s not the case with rain water, swimming pool water, salt water, or that puddle of mud your phone falls into when you get out of your car. Plus, some liquids are not water, such as cleaning agents or other chemicals, that can quickly cause corrosion.

These real-world liquids your iPhone might encounter can compromise the water seals in your phone when pure water would not.

Water In the Lightning Port

A typical example of water in your iPhone happens when you get an error message that tells you water has been detected in the Lightning port. This disables charging to prevent a short circuit through the Lightning connector that can damage your phone’s internal components.

You can follow our complete guide for more details, but the short version is that you shake out any excess liquid in the port. Then put the phone upright somewhere with low humidity and good airflow at room temperature. Wait a few hours for the port to dry naturally, then try connecting the charger again. Do not attempt to dry the port by inserting anything into it.

What to Do With a Wet iPhone

If your iPhone has been splashed with water but hasn’t been immersed in it, it will probably be okay unless its water seals have been compromised.

If you have a water-resistant iPhone, you may want to rinse it gently with clean tap water or, ideally, distilled water free from impurities. However, since most people don’t keep bottles of distilled water around, tap water is your next best choice. This helps remove corrosive liquids or other impurities, such as salt or minerals.

If you have an iPhone that’s not water resistant, a damp cloth is a good alternative, or perhaps even preferred for a water-resistant model if you don’t want to take any chances.

Once you are satisfied that your iPhone is free from pollutants, use a soft, absorbent, dry, lint-free cloth to try it as well as you can. A paper towel can also work, but some coarse ones could scratch your phone. Do not try to force the cloth into the charging port; see the above section about Lightning port liquid for more details.

You may be wondering if you should turn off your iPhone. The idea is that turning off the phone prevents short circuits if the liquid comes in contact with a conductive trace. If the liquid has intruded into the phone deeply enough to cause a short circuit, turning it off won’t make much difference.

You should not open the SIM tray until the phone is completely dry! Once confident, open the SIM tray to check for any liquid inside. You’ll also find the liquid damage indicator, which we’ll explain below under “Checking for Water Damage.”

What to Do With an Immersed iPhone

If your iPhone wasn’t merely splashed but went for an impromptu swim, there are some differences in how you should handle things.

First, get the phone out of the water as quickly as possible, especially if the water is deep. The time the phone can resist water ingress drops rapidly in deep water.

Once you have retrieved your phone from the depths, shake it firmly (but carefully) to expel the excess liquid. Rinse it as described above if the liquid it fell into has impurities. From there, proceed as you would with a splashed phone.

The Uncooked Rice Myth

With a phone exposed to water, a key goal is to get the water out. However, there are plenty of myths about how to do this, and the most infamous one might be putting your phone in a bowl of uncooked rice.

The thing is, it just doesn’t work, and the dust and starch from dry rice can damage components. Plain old air is much better at removing water from your phone. It may take longer than usual if you live somewhere with high atmospheric humidity, but air will remove all the water eventually, except if there’s water somewhere airtight. However, if it was airtight, it was probably watertight as well!

You might have some luck putting your phone in a sealed container and silica gel packets, which capture water droplets from the air and reduce the humidity, but it’s not a magic bullet.

You should also avoid using heat sources such as a hair dryer to speed up the process. This can damage the phone in several ways. It can melt the adhesive that holds the phone together, cause the battery to overheat and fail, or damage components that are not designed to withstand those temperatures. It’s best to be patient.

Checking for Water Damage

From the iPhone 7 and later, iPhones include an LCI or Liquid Contact Indicator. This is a little strip or dot of material that changes color permanently when it comes in contact with liquid. There may be several of these inside a phone; this is how Apple and other phone makers can tell if water has made it inside a phone.

You can see one of these indicators if you remove the SIM card of your iPhone, and if it hasn’t turned red, it means water did not make it in through the SIM tray, at least. This is one of the main reasons we recommend ensuring the phone is dry before popping out the SIM!

Check out Apple’s LCI location page to see which iPhone models have an LCI and where to find them.

Eject Water From an iPhone Speaker

The speaker ports in an iPhone with a water resistance rating won’t be ruined by water, but it can lead to muffled or quiet sound. Any water in the speaker ports will eventually go away through regular air drying via the speaker grills; however, you can theoretically eject excess water from the speaker port using sound pressure. The idea probably comes from the official sonic water ejection feature found in the Apple Watch and is essentially a DIY copy of it.

Several YouTube videos claim to provide a sound that efficiently ejects water from iPhone speakers, and there’s no harm in trying one to see if it works for you. There may be apps on the App Store that promise to do the same thing but save your money and just play a YouTube video instead.

When to Take Your Phone In

A water-damaged iPhone (or Android phone!) is one of the hardest things to fix, and if water has penetrated the interior of your iPhone, it will most likely need a replacement rather than a repair. If your phone is behaving strangely after being exposed to water, if the SIM LCI has been triggered, if the buttons don’t work or register phantom presses, or if the phone won’t turn on at all, it’s time for professional help.

The standard Apple warranty won’t cover accidental water damage. However, if your phone is still in good condition with no reason that the water seals should be compromised, you might have a case with Apple Support that the damage happened due to a factory fault.

Ultimately, it’s better to pay for accidental damage insurance covering water damage since we live in a wet world, and the chances that your iPhone will be splashed or dunked at some point are likely.

How To Get Out Of Safe Mode In Windows 11/10

This article explains how to get out of Safe Mode in Windows 11 and Windows 10 computers. There are mainly two methods, and the steps depend on how you opted for the Safe Mode. You can easily boot Windows in Safe Mode, which helps you fix various issues related to software, drivers, settings, etc. There are multiple methods to start your Windows 11/10 PC in Safe Mode.

There are mainly two ways (although there are more) to boot your PC in Safe Mode – using Advanced startup options and using the System Configuration Utility. If you opt for Safe Mode using Advanced startup, you cannot use the other method and vice versa. Therefore, you must follow the first guide if you started your PC in Safe mode using Advanced startup only. The second guide is for those who booted their PC in Safe using System Configuration. You can also use the Command prompt method.

How to get out of Safe Mode in Windows 11/10

To get out of Safe Mode in Windows 11/10, follow these steps:

Select the Restart option.

To learn more about these steps, continue reading.

If you start your PC in Safe Mode using Advanced startup, it is easy to get out of Safe Mode. All you need to do is restart your computer as you normally do.

Your computer may take some time to restart and start in normal mode.

How to exit Safe Mode using System Configuration on Windows 11/10

To exit Safe Mode on Windows 11/10 using System Configuration Utility, follow these steps:

Press Win+R to open the Run prompt.

Type msconfig and hit the Enter button.

Switch to the Boot tab.

Remove the tick from the Safe boot checkbox.

Restart your computer.

Let’s check out these steps in detail.

To get started, you need to open the System Configuration panel first. For that, press Win+R to open the Run prompt, type msconfig and hit the Enter button.

Once it is opened on your screen, switch to the Boot tab and remove the tick from the Safe boot checkbox.

However, there is another method you can use to get rid of Safe Mode. In this case, you need to use the Command Prompt.

Related: Windows Safe Mode stuck; Booting hangs or goes in a loop.

How to exit Safe Mode using Command Prompt in Windows 11/10

To get out of Safe Mode in Windows 11/10 using Command Prompt, follow these steps:

Search for cmd in the Taskbar search box.

Enter this command: bcdedit /deletevalue {current} safeboot

Restart your computer.

Let’s delve into these steps in detail.

Once done, enter this command:

bcdedit /deletevalue {current} safeboot

Then, you need to restart your computer. You can close the Command Prompt window and restart your PC like you normally do.

You can also enter this command:

shutdown /r Cannot log in and access desktop while in Safe Mode

If you are unable to log in and access your desktop in Safe Mode, then you may need to restart your PC in Safe Mode with Networking. This issue can occur if you are using a Microsoft account password to login.

This will restart the PC again in Safe Mode with Networking. Now enter your password and see.

Why is my computer stuck in Safe Mode?

There could be multiple reasons why your computer is stuck in Safe Mode. However, if your PC is stuck in Safe Mode, you can follow this guide to get rid of it. One of the aforementioned methods is sure to help you exit Safe Mode.

How do I exit Safe Mode on Windows 11?

To exit Safe Mode on Windows 11, you can restart your PC via the Start Menu. However, if you didn’t use the Advanced startup to get into Safe Mode, you need to use other methods. You can open the System Configuration panel and uncheck the Safe boot box.

That’s all! Hope this guide helped.

Related: Safe Mode not working; Cannot boot in Safe Mode.

9 Hidden Customization Settings To Get The Most Out Of Your Mac

There are many features in macOS that are unknown to many. In some cases, a macOS user can go years before making a new discovery. That is, until you have read some of the best macOS hidden customization settings to help you get more out of your Mac.

1. Cleaning Up System Preferences

System Preferences on the Mac is a one-stop shop for all of your main settings. However, for all of the items you need on this menu, there are plenty you don’t. Use this handy trick to clean up the menu and only leave the settings you want.

2. Find the Emojis

Did you know the Mac has its own emoji keyboard? They are all available right from your Mac keyboard, and you probably never knew they were there. Accessing the emojis is as easy as hitting Control + Command + Space. Once you hit that combination, the emoji picker automatically opens. You can use emojis in a variety of applications, especially Safari, Mail, Calendar, Reminders, Notes, and iMessage.

3. Rename Multiple Files at Once

This is definitely one of the handier tricks, especially for managing photos. To do this, go into Finder and find a bunch of photos, documents or whatever file type you prefer.

4. Automatically Launch Programs

One of the easiest tips you can discover on a Mac is to start applications at launch.

To get started:

Head to System Preferences and choose “Users & Groups.”

On the right side of the window, you’ll have an option for “Login Items.”

Under that heading, you can add or remove applications by using the plus or minus buttons.

A word of warning for this tip as well: don’t initiate too many programs at launch, or you might slow your computer’s startup time. Adding Spotify/Apple Music, a browser, Twitter and smaller applications is perfectly fine.

5. Combine Open App Windows to Tabs

Instead of keeping multiple application windows open, combine them with tabs.

6. Spotlight Does Math

macOS comes with a calculator, but sometimes you just want to do a quick math calculation. Did you know that Spotlight can do math or currency conversion?

To convert currency, open Spotlight again and type in the amount you wish to convert. For example, if you put $100 into the search bar, it will return currency conversions in Japanese yen, Swiss francs, Canadian dollars, British pounds and Euros.

7. Create Keyboard Shortcuts

Keyboard shortcuts are hardly new for most computer users, but did you know Apple allows you to create your own?

8. Stop Autoplaying Content

Open Safari and go to Preferences at the top of the menu bar.

Head to the “Websites” tab.

Find the option labeled “Auto-Play” and open the drop-down menu to choose to stop audio and video from playing automatically. You can also block videos entirely that have sound enabled.

9. Muting Siri

Everyone knows the distinct sound of Siri’s responses, but that doesn’t mean they are required. Instead, opt for a silent Siri response with this macOS tweak.

The above-mentioned tips are a few of the hidden customization settings in Mac, with more features like changing folder icons, managing multiple app windows, etc. not included. These showcased the power of macOS and all of the easy ways you can adapt it to your own use. What’s your favorite hidden Mac setting?

David Joz

David is a freelance tech writer with over 15 years of experience in the tech industry. He loves all things Nintendo.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Port Forwarding Explained. How To Forward Ports?

The IP address alone is not is sufficient to deliver any information to a computer. How does the computer network know what is to be done with the information? This is determined by the port number to which the information packet is sent. This post tells you what’s Port forwarding; and how do you forward Ports.

What is Port Forwarding?

In normal language, a port is where ships anchor/dock and planes land. They then proceed with their journey as per schedule.  In Information Technology lingo, ports are hardware and software (called logical ports) and they help with everything the computer does. The different points you see on your computer for attaching peripherals are called hardware ports. Their work is to send the information received to the correct process(es).

Logical ports are not hardware built. You can’t see them, but they are there – more than 6000 ports in any working computer. Though all of them are not used, some are common (for example port 80 is reserved for interacting with HTTP). Another example: Port 25 is used to send an email (SMTP).

Once a data packet reaches any IP Address (i.e. computers and IoT devices), the port forwards the data packet to the respective part of the device so that it can be processed properly. So how does the computer know where exactly to forward the data? This is made possible by ports. The computer, which is receiving data, relays it to the indicated ports that serve different purposes.

You know that everything on the Internet has an IP (Internet Protocol) address. Along with the IP address, the sender network also sends a port address. For example, if you are accessing something on the web through any Internet browser, the port address would be like where 80 is the port number on the computer or any IoT device having IP address A similar style of port addresses is used to print and scan things, upload and download stuff to/from the Internet, and many other things that a computer does.

If you wish to know what all ports are open on your PC, type the following command in an CMD and press Enter key.

netstat -a

Third-party port scanner apps are also available to give you details of the ports on your computer.

Port forwarding is also known as Port mapping. It is required when trying to access a computer network from the outside of the network firewall or router. Online gamers often need to do port forwarding.

How to forward Ports?

Though you can forward ports using the PowerShell through the netsh command, it is hard to find out the values of parameters that come with the command.

There are some free third-party software like FwdPortForwardingApp (Link) that help you in port forwarding so that you do not have to experiment with different values of command-line parameters (values to be provided to the command).

You can configure port forwarding from your router or firewall. The router method is easier, so we’ll talk about it.

Fire up your browser

Enter in the browser address bar

Your router’s welcome page appears

Fill in your ID and password for the router you are trying to connect to

ID in most cases is admin and password is password; some routers have admin as both ID and password; if you can’t find it, call your router manufacturer’s service center to know the ID and password

In the router page, look for port forwarding under Advanced Settings

Fill in the port number to which you want items forwarded

Save and exit the router; restart router for changes to be applied

Note that using this method would require you to have a static IP address on the port receiving the forward. You can set up your static IP address using IPv4 or IPv6 option in your computer’s network troubleshooting option in Control Panel.

You can also Configure Router Firewall using third-party tools like Simple Port Forwarding app. You can download the Simple Port Forwarding app from here.

10 Tips To Get Most Out Of Safari In Ios 13 And Ipados 13

Best Safari Tips to Get the Best Browsing Experience in iOS 13 and iPadOS 13

Even if you have taken a close look at Safari, chances are you might have missed quite a few new additions. It’s because the revamped web browser has got many new features under the hood. Whereas the headlining additions have got the most attention, the ones that are slightly under the wraps haven’t yet got any substantial coverage. And, I bet you will find them equally appreciable. With that said, let’s get started!

1. Customize the Download Manager

2. Request Desktop Website

Another feature that has enhanced web browsing in Safari is the ability to request a desktop website with ease. Though Apple’s web browser already had the option to switch to the desktop version of a site, switching back to the mobile version was a huge pain in the back due to the lack of a straightforward method. But those days are gone for the better. With iOS 13, you can quickly switch between the desktop and mobile versions of a website on your iPhone. To request the desktop version of a website in Safari on your iPhone, simply tap on the text button at the top left of the screen in the search bar and choose Request Desktop Website.

3. Send Content As PDF or a Web Archive

While browsing the web, I make it a point to save all of my favorite stories to catch them later with peace. So, it’s my favorite feature and I’m sure a lot of users are going to love it as well. In the Share Sheet, there is a new option to share an entire web page as a web archive or PDF. To do so, simply tap on the Share button and then select Options. Then, you have four options: Automatic, PDF, Reader PDF, and Web Archive. Select your most preferred option and then hit Done at the top right to finish.

4. Automatically Close All Tabs

5. Choose What Size of Photo to Upload

This one, kind of, kills two birds with one stone! Well, if you didn’t get a good hang of the idiom, let me tell you that Safari now lets you choose what size of a photo to upload. It can not only speed up the uploading process, especially when you are dealing with high-resolution images, but also save plenty of mobile data on your iPhone and iPad. So, save this hack to prevent your limited bandwidth from ending well before the deadline.

1. Simply choose the option to upload an image on a website in Safari and then select Photo Library.

2. Now, select the images you want to upload. After that, you should see the actual size of your images. And below the actual size, there will be an option to choose image size. Tap on it and then choose the preferred image size. You have multiple options like Large, Medium, Small, or Actual Size.

3. Next, return to your photo library and tap on Done in the top-right corner of the screen to start uploading the image.

6. Customize Your Favorite Sites

7. Customize Website Settings

Wouldn’t it be better if you could customize your favorite websites so that every time you visit them, they would look in line with your taste? Well, with iOS 13 and iPadOS 13, you can fine-tune website settings. Whether you are an avid reader or someone who likes exploring the web, you would find it very handy. To customize website settings in Safari, simply tap on the tiny text button at the top left the search bar and then choose Website Settings in the menu. After that, fine-tune all the options depending on your needs. For instance, you can use reader mode automatically on the site, allow it to access the camera and microphone of your device. Once you have customized everything, tap on Done to confirm the changes.

8. Delete Frequently Visited Sites

9. Access Open Tabs from Search

Well, this one might sound too little a feature to find a mention in this notable roundup. But let me tell you that it can play a good role in speeding up your web browsing experience on your iPhone or iPad. When you type the address of a website in the smart search, the web browser automatically directs you to the related open tab; instead of opening a new tab. Thus, you don’t need to open unnecessary tabs in the web browser.

10. Save All of Your Open Tabs As Bookmarks Bonus: Make the Most of All-New iPadOS Safari Keyboard Shortcuts

If you want to enhance your productivity, never miss out on the keyboard shortcuts as they can save plenty of time. And if you like to use shortcuts to get your work done faster, you would be glad to know that Apple has introduced around 30 iPadOS Safari keyboard shortcuts that are quite handy. Moreover, the work with not only Apple’s Smart Keyboard but also any third-party Bluetooth keyboards.

Open link in new window (Command + Alt + tap)

Use selection for Find (Command + E)

Email a specific page (Command + I)

Open link in new tab (Command + Shift + tap)

New Private tab (Command + Shift + N)

Actual size (Command + 0)

Open search result (Command + Return)

Decrease Reader text size (Command + -)

Zoom in (Command + +)

Zoom out (Command + -)

Use default font size in Reader (Command + 0)

Open link in background (Command + tap)

Save webpage (Command + S)

Change focused element (Alt/Option + tab)

Focus Smart Search field (Command + Alt/Option + F)

Dismiss web view in app (Command + W)

Increase Reader text size (Command + +)

Download linked file (Alt + tap)

Add link to Reading List (Shift + tap)

Close other tabs (Command + Alt/Option + W)

Scroll around screen (arrow keys)

Paste without formatting (Command + Shift + Alt/Option + V)

SEE ALSO: How to Disable Link Preview in iOS 13 Safari on iPhone and iPad

Make the Most of the Best Safari Tips in iOS 13 and iPadOS 13

Update the detailed information about How To Get Water Out Of Charging Port? on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!