Trending March 2024 # How To Get Out Of Safe Mode In Windows 11/10 # Suggested April 2024 # Top 9 Popular

You are reading the article How To Get Out Of Safe Mode In Windows 11/10 updated in March 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Get Out Of Safe Mode In Windows 11/10

This article explains how to get out of Safe Mode in Windows 11 and Windows 10 computers. There are mainly two methods, and the steps depend on how you opted for the Safe Mode. You can easily boot Windows in Safe Mode, which helps you fix various issues related to software, drivers, settings, etc. There are multiple methods to start your Windows 11/10 PC in Safe Mode.

There are mainly two ways (although there are more) to boot your PC in Safe Mode – using Advanced startup options and using the System Configuration Utility. If you opt for Safe Mode using Advanced startup, you cannot use the other method and vice versa. Therefore, you must follow the first guide if you started your PC in Safe mode using Advanced startup only. The second guide is for those who booted their PC in Safe using System Configuration. You can also use the Command prompt method.

How to get out of Safe Mode in Windows 11/10

To get out of Safe Mode in Windows 11/10, follow these steps:

Select the Restart option.

To learn more about these steps, continue reading.

If you start your PC in Safe Mode using Advanced startup, it is easy to get out of Safe Mode. All you need to do is restart your computer as you normally do.

Your computer may take some time to restart and start in normal mode.

How to exit Safe Mode using System Configuration on Windows 11/10

To exit Safe Mode on Windows 11/10 using System Configuration Utility, follow these steps:

Press Win+R to open the Run prompt.

Type msconfig and hit the Enter button.

Switch to the Boot tab.

Remove the tick from the Safe boot checkbox.

Restart your computer.

Let’s check out these steps in detail.

To get started, you need to open the System Configuration panel first. For that, press Win+R to open the Run prompt, type msconfig and hit the Enter button.

Once it is opened on your screen, switch to the Boot tab and remove the tick from the Safe boot checkbox.

However, there is another method you can use to get rid of Safe Mode. In this case, you need to use the Command Prompt.

Related: Windows Safe Mode stuck; Booting hangs or goes in a loop.

How to exit Safe Mode using Command Prompt in Windows 11/10

To get out of Safe Mode in Windows 11/10 using Command Prompt, follow these steps:

Search for cmd in the Taskbar search box.

Enter this command: bcdedit /deletevalue {current} safeboot

Restart your computer.

Let’s delve into these steps in detail.

Once done, enter this command:

bcdedit /deletevalue {current} safeboot

Then, you need to restart your computer. You can close the Command Prompt window and restart your PC like you normally do.

You can also enter this command:

shutdown /r Cannot log in and access desktop while in Safe Mode

If you are unable to log in and access your desktop in Safe Mode, then you may need to restart your PC in Safe Mode with Networking. This issue can occur if you are using a Microsoft account password to login.

This will restart the PC again in Safe Mode with Networking. Now enter your password and see.

Why is my computer stuck in Safe Mode?

There could be multiple reasons why your computer is stuck in Safe Mode. However, if your PC is stuck in Safe Mode, you can follow this guide to get rid of it. One of the aforementioned methods is sure to help you exit Safe Mode.

How do I exit Safe Mode on Windows 11?

To exit Safe Mode on Windows 11, you can restart your PC via the Start Menu. However, if you didn’t use the Advanced startup to get into Safe Mode, you need to use other methods. You can open the System Configuration panel and uncheck the Safe boot box.

That’s all! Hope this guide helped.

Related: Safe Mode not working; Cannot boot in Safe Mode.

You're reading How To Get Out Of Safe Mode In Windows 11/10

How To Open Word, Excel, Powerpoint, Outlook In Safe Mode

If any of your Microsoft Office programs like Word, Excel, PowerPoint, Outlook, Publisher, Visio, etc.. are giving you problems while opening their respective Office files, you might need to open the Office program in Safe Mode. Doing this will help you troubleshoot and fix any problems you may be facing on your Windows 11/10 PC.

Start Word, Excel, PowerPoint, Outlook in Safe Mode

To launch Word, Excel, PowerPoint, Outlook or any Microsoft Office program, you can follow one of these ways:

Press the CTRL key

You will be asked – Do you want to start Word in safe mode?

The Office file will open in safe mode.

Alternatively, you can use the /safe parameter in the Run to open the file in safe mode. This is User-Initiated Safe Mode.

To open Office programs like Word, Excel, PowerPoint, Outlook, Publisher, Visio in Safe Mode follow these steps:

How to open Word in safe mode? How to open Excel in safe mode? How to open PowerPoint in safe mode? How to open Outlook in safe mode?

Read: Outlook only opens in Safe Mode

How to open Publisher in safe mode? How to open Visio in safe mode? What are the restrictions that apply in User-initiated Office Safe Mode?

The following restrictions apply when you start Word, Excel, PowerPoint, Outlook, Publisher, Visio, etc. in User-initiated Office Safe Mode:

No templates can be saved.

The Office Assistant is not automatically displayed.

Toolbar or command bar customizations are not loaded, and customizations cannot be saved.

The AutoCorrect list is not loaded, and changes are not saved.

Recovered documents are not automatically opened.

Smart tags are not loaded, and new tags cannot be saved.

All command-line options are ignored except “/a” and “/n”.

Files cannot be saved to the Alternate Startup Directory.

Preferences cannot be saved.

Additional features and programs are not automatically loaded.

Documents with restricted permission may not be created or opened.

What is Microsoft Word Safe Mode?

Let us discuss Word Safe Mode in detail. A similar explanation applied to other Office apps too.

With Office Safe Mode, you can use Word after it has encountered startup problems. When a problem is detected at startup, the Automated Office Safe Mode either fixes the problem or isolates the problem. Therefore, you can start Word successfully.

During the startup of Word, Office Safe Mode checks for problems such as an add-in or an extension that does not start. Office Safe Mode also checks for a corrupted resource, for a corrupted file, for a corrupted registry, or a corrupted template.

If Word encounters a problem during startup, you may receive an error message that is similar to one of the following the next time that you start Word:

Word failed to start correctly last time. Starting Word in safe mode will help you correct or isolate a startup problem to successfully start the program. Some functionality may be disabled in this mode. Do you want to start Word in safe mode?

Word has detected a problem with some of the current preferences. Would you like to restore these preferences to their default values?

Word has determined that a recent problem occurred while using a description. Would you like to disable the description?

The Office Safe Mode options to resolve the problem vary, depending on the cause of the problem. As a temporary solution, Office Safe Mode may prompt you to:

Prevent the loading of add-ins, templates, or documents by putting them on the Disabled Items list.

Reset registry keys back to their default values.

Reset the global template (Normal.dot) back to its default values.

As was mentioned earlier, these switches may help you troubleshoot and repair Microsoft Word:

To simply reset the Word registry values to default type

winword

/r

in start search and hit Enter

To prevent Word from loading the macros type

winword

/m

and hit Enter

To prevent Word from loading its add-ins, type

winword

/a

and hit Enter.

You can see the complete list of command-line switches for Microsoft Word here.

How To Get Water Out Of Charging Port?

Did you accidentally spill water on your phone or drop it in water? Happens to a lot of us. These days, water-resistant devices are more popular than ever, but they’re still not immune to water damage. Especially if the charging port is moist, any device can malfunction. 

Even if you’re unaware of how water got into your charging port, most smartphones give you a liquid-detection alert. Luckily, there are some easy ways to get your phone or tablet dry as quickly as possible. So, let’s quickly jump into how to get water out of the charging port on all devices. 

Charging your phone when the port is still wet can lead to unwanted consequences. Hardware components, like the pins and the cables, can get damaged. As a result, your charging cable or the port may stop working.

Additionally, you might also get electric shocks while trying to charge your phone.

However, if you accidentally charged your phone and are worried, you can check the IP rating of your phone.

Ingress Protection denotes how effective your phone is in terms of water resistance and dust particles.

There are two numbers in the rating, for instance, IP68. The first number represents the level of protection against solid particles, and the second number refers to liquid. The more the numbers, the better the protection.

So, the ideal IP rating is IP68, as it refers to full protection against both dust particles and liquid. If your phone is either iPhone 12 or Samsung Galaxy S21, you can rest assured as both phones have IP68. Nevertheless, such phones cannot continue functioning properly while being immersed in water for an average of more than 30 minutes.

If you just dropped your phone in water or somehow got the port wet, firstly don’t panic. There are ways you can save your phone from serious damage quickly. Carefully follow these steps: 

Important Note: Always wear gloves while dealing with issues around the charging ports, cables, and plugs. Do not use any sharp objects to apply pressure into the port. This is to ensure you don’t get any electric shocks or accidentally damage the charging port.

Firstly, shut down your phone and give it a gentle tap to get the excess water out. We can now proceed to further solutions.

First, you’ll need to get rid of the moisture. You can do this by taking a tiny piece of soft cotton cloth. Now, gently try to clean the charging port by rubbing the cloth inwards.

Then, you can let your phone dry on its own for up to half an hour or more. Be sure to not apply a lot of pressure as it can push the water inside the port. 

One most effective method is to let the phone dry naturally. Usually, the water inside the port will evaporate in a few hours. While you’re doing this, make sure you’re keeping the phone upright. Also, it’s best to place your phone in an area where it’s well-ventilated. 

If your phone is not charging with a cable despite using the methods above, try using a wireless charger. However, we recommend making sure the phone and the wireless charger are dry before charging. 

If the above solutions didn’t work and you believe the charging port is damaged, you can try contacting customer care service. For Samsung users, you can contact their Support page, or you may even visit their walk-in service center. If you have an iPhone, you can contact the Apple Support page. 

You may even take your phone to a local repair center if your phone is not turning on after trying the fixes above. 

It’s natural to panic and take quick measures when trying to save your phone from water damage. But not all tricks work the same. Let’s look at some of the don’ts while trying to dry your phone.

It’s common to believe it’s a good idea to let your phone evaporate in the sun. However, prolonged sun exposure can cause permanent damage to your phone. Your phone’s battery can overheat, and the hardware components, like the miniature circuit board, can get damaged. Additionally, your phone’s screen might also crack due to the high temperature. 

Placing your phone inside dry rice overnight is an old method to dry your phone. However, it doesn’t always work properly. Tiny dirt particles in the rice or even the rice grains can get inside the charging port. Instead, you can use other methods above or place silica gel sachets near the charging port. 

Using cotton swabs to get rid of excess moisture from your phone may seem ideal, but it’s not. Rubbing the swab in the port can get the tiny cotton dust particles inside. The swab may also push the water further inside. 

If you use a paper towel inside a wet charging port, the towel will also get wet, and it can get inside the port. It’ll be difficult to take out wet tissue particles from the port. So, it’s best not to use this method. 

Using a vacuum hose might get some water out, but the air pressure can interfere with the internal components inside your phone. Additionally, a vacuum hose can’t get rid of other liquid dirt from the port. 

A hairdryer blows the air directly inside the charging port of your phone. This will push the water further inside, which can cause more harm than good. You can instead just use it diagonally at the lowest speed and in a cold air setting. 

If you’re unsure what to do, you might feel like letting your phone sit for extended periods of time, like a few days. However, this can lead to a problem called Corrosion. It is the slow damage to electronic components due to environmental changes. It might take up to a few weeks to notice symptoms of corrosion on your phone. 

Shaking the phone will not get rid of the moisture. Instead, it might push the water further inside the charging port. This can cause more damage, and it might take more time to dry your phone. 

Any sharp objects, like a toothpick, can cause more damage inside the charging port. So, it’s best not to use toothpicks even if you wrap cotton around them. 

As mentioned above, if you notice symptoms of corrosion on your phone, it signifies that it’s too late to apply simple solutions. Since corrosion causes permanent damage, it might be difficult or costly to fix your phone. 

If you’re no longer getting moisture or liquid detection alerts on your phone, you can figure that your phone is completely dry. Additionally, if you’re not noticing any minor glitches, your phone is completely dry. 

If you can confirm that your phone is completely dry, but you are still getting liquid detection alerts, here’s how you can fix it. 

You can also simply turn off the moisture notification from your settings. Here’s what you’ll need to do: 

Power Cycling is like a hard reset option. It’s a method of shutting down and restarting the phone’s hardware. You can do this by simply switching off your phone, waiting at least one minute, and then powering it on. 

You can always fix minor bugs, like false alerts on your phone, by updating the OS. Simply check and install any available software updates. 

There’s a chance you might get false alerts if there’s water in your charging cable or if it’s damaged. So, just switching to another charging cable might prevent your phone from giving you such alerts. 

If you’re still getting moisture alerts even after power cycling, you can restart your phone on Safe Mode. 

On Android

Shut down your phone and let it be for a few seconds. 

Hold the power button again for 2-3 seconds. You’ll get a pop-up option to confirm rebooting in Safe Mode. 

Tap on OK. 

On iPhone

Turn off your iPhone. 

Turn on your iPhone and when it’s lighting up, hold down the Volume Down button until you see the Apple logo. 

When the phone is booted, it goes in Safe mode. 

If there are still dirt particles or rust inside the port, you might get false moisture alerts. You can use flashlight to look into the port.

If most solutions aren’t working, you can try performing a full factory reset on your phone. However, please note that this will clear all your data. So, it’s best to make sure you have backed up all your data. Since this step can be risky, please try this method at the end. 

On Android

Please note that the settings may differ depending on your current Android version. 

On iPhone 

If the above solutions are not working, you can try replacing the charging port. You can do this at a local electronics repair shop. 

If your phone is now dry and working fine but there’s no sound, there might be a problem with the speakers. Check if there’s water in the speaker area. You might also not hear any sound if it’s connected to another device via Bluetooth. 

You can also check the volume level and whether it’s in Do Not Disturb mode. Alternatively, try rebooting your phone. If nothing is working, you can get your phone repaired at a local electronics shop. 

Firstly, turn off your phone and take it indoors where it’s warm. Then, with a clean, soft towel, get rid of the excess snow. You can then try the methods above to remove moisture and dry your phone. Alternatively, you can also take it to a local electronics shop. 

If none of the solutions are working and your phone doesn’t seem to turn on at all, it’s best to call for help. A dead phone after such accidents signifies that there’s been serious damage. You can take your phone to any local repair shop or contact the respective Support page of your phone’s brand. 

How To Get Water Out Of Your Iphone

Our smartphones go everywhere with us, and lots of the places we go are wet! If you have water in your iPhone, you can do a few things to rectify the situation.

Liquid exposure isn’t the immediate death sentence it used to be, but it can still wreck your phone. Here’s what to do when things get splashy.

Table of Contents

Water Resistant Doesn’t Mean Waterproof

Before we get into how to deal with water in your iPhone, let’s clarify what your iPhone is designed for regarding water resistance. The first iPhone to get an IP (Ingress Protection) rating was the iPhone 7. That doesn’t mean that older iPhones didn’t have some measure of water resistance; it’s just that they were not tested and certified. Apple makes no promises about models older than the iPhone 7.

Some manufacturers add additional resistances under the rating, the time duration can be much longer, and depths are generally up to 9.8ft. If your iPhone has an IP68 rating, look up the specific resistance specifications for that model.

The water resistance rating applies to a new iPhone in perfect condition. Wear and tear on the device can compromise its IP rating. If your phone’s been dropped a few times, bent a little in your pocket, and has small cracks anywhere, that may give water a way inside.

Not All Liquids Are Equal

Apart from your phone being water resistant rather than waterproof, the type of “water” also matters. When the certification tests are done, it’s with water that’s quite pure. That’s not the case with rain water, swimming pool water, salt water, or that puddle of mud your phone falls into when you get out of your car. Plus, some liquids are not water, such as cleaning agents or other chemicals, that can quickly cause corrosion.

These real-world liquids your iPhone might encounter can compromise the water seals in your phone when pure water would not.

Water In the Lightning Port

A typical example of water in your iPhone happens when you get an error message that tells you water has been detected in the Lightning port. This disables charging to prevent a short circuit through the Lightning connector that can damage your phone’s internal components.

You can follow our complete guide for more details, but the short version is that you shake out any excess liquid in the port. Then put the phone upright somewhere with low humidity and good airflow at room temperature. Wait a few hours for the port to dry naturally, then try connecting the charger again. Do not attempt to dry the port by inserting anything into it.

What to Do With a Wet iPhone

If your iPhone has been splashed with water but hasn’t been immersed in it, it will probably be okay unless its water seals have been compromised.

If you have a water-resistant iPhone, you may want to rinse it gently with clean tap water or, ideally, distilled water free from impurities. However, since most people don’t keep bottles of distilled water around, tap water is your next best choice. This helps remove corrosive liquids or other impurities, such as salt or minerals.

If you have an iPhone that’s not water resistant, a damp cloth is a good alternative, or perhaps even preferred for a water-resistant model if you don’t want to take any chances.

Once you are satisfied that your iPhone is free from pollutants, use a soft, absorbent, dry, lint-free cloth to try it as well as you can. A paper towel can also work, but some coarse ones could scratch your phone. Do not try to force the cloth into the charging port; see the above section about Lightning port liquid for more details.

You may be wondering if you should turn off your iPhone. The idea is that turning off the phone prevents short circuits if the liquid comes in contact with a conductive trace. If the liquid has intruded into the phone deeply enough to cause a short circuit, turning it off won’t make much difference.

You should not open the SIM tray until the phone is completely dry! Once confident, open the SIM tray to check for any liquid inside. You’ll also find the liquid damage indicator, which we’ll explain below under “Checking for Water Damage.”

What to Do With an Immersed iPhone

If your iPhone wasn’t merely splashed but went for an impromptu swim, there are some differences in how you should handle things.

First, get the phone out of the water as quickly as possible, especially if the water is deep. The time the phone can resist water ingress drops rapidly in deep water.

Once you have retrieved your phone from the depths, shake it firmly (but carefully) to expel the excess liquid. Rinse it as described above if the liquid it fell into has impurities. From there, proceed as you would with a splashed phone.

The Uncooked Rice Myth

With a phone exposed to water, a key goal is to get the water out. However, there are plenty of myths about how to do this, and the most infamous one might be putting your phone in a bowl of uncooked rice.

The thing is, it just doesn’t work, and the dust and starch from dry rice can damage components. Plain old air is much better at removing water from your phone. It may take longer than usual if you live somewhere with high atmospheric humidity, but air will remove all the water eventually, except if there’s water somewhere airtight. However, if it was airtight, it was probably watertight as well!

You might have some luck putting your phone in a sealed container and silica gel packets, which capture water droplets from the air and reduce the humidity, but it’s not a magic bullet.

You should also avoid using heat sources such as a hair dryer to speed up the process. This can damage the phone in several ways. It can melt the adhesive that holds the phone together, cause the battery to overheat and fail, or damage components that are not designed to withstand those temperatures. It’s best to be patient.

Checking for Water Damage

From the iPhone 7 and later, iPhones include an LCI or Liquid Contact Indicator. This is a little strip or dot of material that changes color permanently when it comes in contact with liquid. There may be several of these inside a phone; this is how Apple and other phone makers can tell if water has made it inside a phone.

You can see one of these indicators if you remove the SIM card of your iPhone, and if it hasn’t turned red, it means water did not make it in through the SIM tray, at least. This is one of the main reasons we recommend ensuring the phone is dry before popping out the SIM!

Check out Apple’s LCI location page to see which iPhone models have an LCI and where to find them.

Eject Water From an iPhone Speaker

The speaker ports in an iPhone with a water resistance rating won’t be ruined by water, but it can lead to muffled or quiet sound. Any water in the speaker ports will eventually go away through regular air drying via the speaker grills; however, you can theoretically eject excess water from the speaker port using sound pressure. The idea probably comes from the official sonic water ejection feature found in the Apple Watch and is essentially a DIY copy of it.

Several YouTube videos claim to provide a sound that efficiently ejects water from iPhone speakers, and there’s no harm in trying one to see if it works for you. There may be apps on the App Store that promise to do the same thing but save your money and just play a YouTube video instead.

When to Take Your Phone In

A water-damaged iPhone (or Android phone!) is one of the hardest things to fix, and if water has penetrated the interior of your iPhone, it will most likely need a replacement rather than a repair. If your phone is behaving strangely after being exposed to water, if the SIM LCI has been triggered, if the buttons don’t work or register phantom presses, or if the phone won’t turn on at all, it’s time for professional help.

The standard Apple warranty won’t cover accidental water damage. However, if your phone is still in good condition with no reason that the water seals should be compromised, you might have a case with Apple Support that the damage happened due to a factory fault.

Ultimately, it’s better to pay for accidental damage insurance covering water damage since we live in a wet world, and the chances that your iPhone will be splashed or dunked at some point are likely.

Dark Mode Black Notepad For Windows 11/10

Although users can enable Dark Theme in Windows 10 or Windows 11 via Settings, it doesn’t apply to the traditional Notepad app. If you want to use a Notepad app with dark mode or black theme on your Windows 11/10 PC, then this article will interest you. Here are some of the best notepad apps that have a dark mode facility.

Notepad is an essential utility in Windows that lets you take notes, save relevant data, etc. It is basic, and it doesn’t have a lot of complex options like other code editors for programmers. However, one essential feature is missing in this tool, and that is Dark Mode. It is quite handy when users need to write a lot of paragraphs in low-light surroundings. In simple terms, dark mode or a black theme might help you get rid of eye strain. For that, you can try out these third-party notepad apps that will let you turn on dark mode without third-party extension.

Dark Mode Black Notepad for Windows 11/10

These are the best notepad apps with dark mode or black theme for Windows 11/10:

Notepad++

Black Notepad

Black NotePad by WinTools

To know how to enable and use the dark theme in various notepad apps for Windows 10, read on.

1] Notepad++

Notepad++ is a free and excellent code editor for Windows 11/10, and here is how to turn on the dark theme in this tool.

At first, open your Notepad++, and select Settings on the menu bar, and choose Style configurator.

There are several black themes available in Notepad++. You need to select the theme called Obsidian. You can try out some other dark themes as well.

Now you should find the black theme in your Notepad++ window. You can tweak the color of the background. For that, you need to open up the Background color window and select something according to your requirements.

2] Black Notepad

If you like the interface of the native Notepad app for Windows 10, and you want to get the dark theme on it, you should check out this tool. Introducing Black Notepad, which is a replica of the traditional Notepad for Windows 10. Options are almost the same, and that’s why you should not have any issue while making the switch.

It doesn’t have a lot of customization related options, but you can change the font color. It is possible to turn them green instead of using white, which is the default text color. Talking about the system requirements, you can download it on Windows 10 Build 15063.0 or higher. As it is available in the Microsoft Store, you can open the app and search for it. Alternatively, you can get it from the Microsoft Store.

3] Black NotePad

Black NotePad is a portable Notepad alternative for Windows 10 that comes with dark mode functionality. Unlike the utility, as mentioned above, it includes a lot of options. For instance, you can do these-

Change font family

Change font color

Change background-color

Create a color profile and apply them whenever needed

Search from inside via Google, Bing, or DuckDuckGo

You can find all these options in the top navigation bar. To be precise, you need to visit the View menu to disclose everything mentioned on the list. For your information, you can set “white” as the background color and keep enjoying the interface like the default Notepad app for Windows 11/10.

It is compatible with Windows 11/10/8/7, and you can download it from the official website.

These tools should help you get a black Notepad on Windows 11/10.

Windows Rt To Get Parts Of Windows 10 Only

Windows RT to get parts of Windows 10 only

Not all Windows are created equal, no matter how much Microsoft tries to convince you otherwise with its Windows 10 spiel. Just yesterday the tech giant was singing the unifying gospel of Windows 10 across all Microsoft’s devices, even including the Xbox game system. But now it is clarifying it just a bit that no, not everyone will be getting Windows 10. Or to be more exact, Microsoft’s rather oddball Windows RT will only be getting certain features of Windows 10 but not the whole shebang.

To be even more precise, Microsoft was referring to a specific model. According to Redmond, the entire Surface Pro family will be getting Windows 10. They are, however, preparing a special update for the Surface, not qualifying which one exactly, that will bring Windows 10 features to the tablet without bringing Windows 10. Considering the Surface, whether it be the RT or the 2nd generation, is the only Windows RT device line (that we know of), we can pretty much consider this applicable to the whole platform. And this can practically be considered the writing on the wall for Windows RT.

There will probably be no tears shed for the platform. Indeed, Windows RT was perhaps a bigger wart than Windows 8 itself. While the focus on ARM tablets is perhaps a welcome attempt, the implementation has left a bad taste in the mouth of even Microsoft’s fans. It offered none of the wide selection of software available to Windows 8, both the Modern and the regular desktop apps. But it also didn’t have access to the conveniences and apps of Microsoft’s real mobile platform, Windows Phone. Windows RT seemed like a half-baked solution made solely for the purpose of putting Windows on ARM tablets.

That purpose might no longer have any value today, with the improvement and proliferation of Intel’s mobile chips. Windows 8 on Intel tablets have found a better niche than Windows RT, and Windows 10 will strive to improve on that. It all looks good for Windows, except for Windows RT. What specific Windows 10 features Microsoft plans to port over, it isn’t saying yet, so we’ll have to wait for more definite information.

That said, the situation does make one wonder if Microsoft still has any plans for the ARM tablet market. Intel is by no means the king of that market, and some might argue that the likes of Qualcomm are still a few steps ahead of the game. Granted, there hasn’t been much demand for ARM-based Windows 8 devices, but probably only because Windows RT proved to be a disaster. Will Microsoft be developing full Windows port for ARM, or has it tied the fate of Windows to Intel and x86/x64 in general? We’ll have to wait and see how it plans to push through with Windows 10’s convergence to find any clues to these questions.

SOURCE: Thurrott

Update the detailed information about How To Get Out Of Safe Mode In Windows 11/10 on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!