Trending March 2024 # How To Fix “No Internet, Secured” Message On Windows 10 # Suggested April 2024 # Top 8 Popular

You are reading the article How To Fix “No Internet, Secured” Message On Windows 10 updated in March 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Fix “No Internet, Secured” Message On Windows 10

“No Internet, Secured,” it says. What a weird message. Surely, if you’re not on the Internet, then online security becomes a bit of a moot point, right? The strange thing is that sometimes this message appears and you actually do have Internet access. Whether you continue having Internet or not, it’s a message that shouldn’t be there. So what causes this age-old Windows problem, and how do you solve it?

As usual, there are many possibilities and many solutions, and we go through all the major ones for you here.

Run the Networking Troubleshooter

The quickest fix beyond resetting your router (which is worth mentioning but doesn’t quite deserve its own heading) is to run the Windows 10 troubleshooter for networking.

If yes, great! If not, it’s time to try the next tip.

Tinker in Device Manager

The Windows device manager (best accessed by typing “device manager” into the Start search menu), is where you can update, disable and re-enable, and reinstall your devices, including the network adapter.

You should try the following things in this order:

Update driver.

Disable device, enable “Flight mode” in the taskbar, reboot PC, then “Enable device” and turn off Flight mode.

Uninstall device, reboot PC, reinstall device. (This should happen automatically for the motherboard or integrated adapters. If you’re using a USB adapter, just unplug it and plug it back in to install its drivers.)

Refresh Your IP Configuration

One of the easier solutions for the ambiguous “No Internet, Secured” message is to refresh your IP configuration. This reassigns your IP address, which will fix the problem if it was down to your IP allocation going out of whack.

Open the Command Prompt, then enter the following commands:



release ipconfig



Once you’ve done these two things, the message will hopefully disappear.

Reset Winsock

There are a couple of other things you can try in the command prompt. The Winsock protocol controls a big chunk of your computer’s communication with network services, and resetting it will reset many of those under-the-hood elements to their default settings.

To reset the Winsock catalog, enter the following into the command prompt:

netsh winsock reset catalog Fix Your Connection’s Properties

In the Properties window, make sure all the following boxes are ticked:

Client for Microsoft Networks

File and Printer Sharing

Internet Protocol Version 4

Internet Protocol Version 6

Link-layer Topology Discovery Responder

Disable iPv6

Yes, we did just tell you to enable IPv6 on your PC, but there can be an exception.

IPv6 is the relatively new Internet protocol that more and more PCs are using due to the fact that the number of available IPv4 addresses is simply running out. Not all networking equipment and ISPs plays nice with iPv6, however, so if you have this switched on, then it could be interfering with your connection. (It’s also possible that you’re connected to the Internet via IPv4, but your PC is essentially letting you know that your IPv6 connection has “No Internet.”)

If you suspect this might be the issue, uncheck the IPv6 box under your connection’s Properties (as accessed through the last tip).

These tips should do it to get that pesky No Internet, Secured message to stop appearing. If you want more help working your way around Windows, then read up on how to find out if someone is logging in to your PC. We also have a handy guide on how to disable auto-refresh on all the big browsers.

Robert Zak

Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading How To Fix “No Internet, Secured” Message On Windows 10

Unidentified Network On Windows (No Internet Access): Solved

Unidentified Network on Windows (No Internet Access): SOLVED Learn to get your internet working properly again




If you received the Ethernet unidentified network message, that means you can’t access the Internet and this is frustrating.

The error may occur due to many problems, including damaged cables or wrong network settings but we cover all possibilities.

This issue can also be caused by malware, so make sure that your computer is safe by running anti-malware tools.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

We use the Internet on daily basis, and it’s a major problem for many users if they can’t access it. Many of our readers reported Unidentified network or Unidentified network no Internet messages on their PCs, and today we’re going to show you how to fix that problem.

Whether it’s happening on your Ethernet or Wi-Fi connection, our solutions will cover all the possible issues that cause these errors on Windows 10 and Windows 11.

But first, let’s go through some preliminary methods of troubleshooting some of the main disruptions that may occur.

What causes the Unidentified Network issue?

Before getting to any solutions listed below, let’s verify some of the most common problems that may cause Internet connection errors:

➡ Check all local networking components

Several users reported that this issue occurs due to the Ethernet cable. One workaround that might help is to unplug and reconnect your Ethernet cable from your PC and router or modem.

Repeat the process several times and check if that solves the problem. In addition, be sure to check your Ethernet cable. If your Ethernet cable is damaged, you might encounter this message.

To fix the problem, you should try replacing your cable. We have a list including the best Cat6 and Cat5E cables that you can choose from.

Restarting and resetting your router and/or modem can also fix this problem quickly and you will see how you can do that in one of our solutions below.

➡ Make sure you are close to your Wi-Fi hotspot

If these errors occur while your device is connected to a Wi-Fi hotspot, make sure that you have enough signal strength.

Move your device closer to the router and eliminate all possible obstacles between the two devices.

That being said, you can start troubleshooting the problems, step by step, as shown below. It’s important to follow the exact procedures in order to fix the errors.

How do I fix the

Unidentified network

error in Windows 10? 1. Turn off Airplane mode

Windows 10 supports Airplane mode, but if you turn on this feature, it will block your Internet connection.

You can also use a hardware switch on your device to turn off Airplane mode. Many devices have this button available, so be sure to look for it on your device.

If you encounter other problems, check our guide on how to fix Airplane mode errors and get more information.

After disabling Airplane mode using the aforementioned methods, Unidentified network message should hopefully disappear.

2. Remove your antivirus software

Antivirus software is one of the most important tools that you can have on your PC and it’s paramount for system protection.

However, some antiviruses can sometimes interfere with your network connection and cause Unidentified network message to appear.

Users reported that the cause for this problem was Avast, and in order to fix the issue you need to remove it completely.

Should you have another antivirus installed, you can start by disabling first and check if the Internet connection is fixed.

If uninstalling your antivirus software fixes the problem, you need to update your antivirus software to the latest version. Alternatively, you can switch to a better antivirus tool.

If you’re getting Unidentified network message, you might have to update your network drivers to fix this issue.

Although Device Manager allows you to update your drivers easily, sometimes it’s better to download the necessary drivers from your network adapter manufacturer.

For that, visit your network adapter manufacturer’s website or the device manufacturer website and locate the drivers section.

Select your network adapter from the list, download the suitable driver and install it. If you don’t have Internet access at all, you’ll need to use a working computer or any other device to download the drivers.

In order to prevent PC damage by installing the wrong driver versions, we suggest doing it automatically by using a specialized tool like Outbyte Driver Updater.

The software below will do all the job on your behalf by updating the correct version of drivers for your device.

4. Turn off Fast Startup

Windows 10 uses the Fast Startup feature by default that allows you to boot Windows 10 faster. It’s very useful, but it doesn’t completely shut down your PC, which can lead to certain issues.

To fix the ethernet unidentified network issue on your PC, many users are recommending to temporarily disable this feature.

Users reported that disabling Fast Startup fixed the problem for them, so be sure to try that. In fact, if this solution worked, you could enable it again and check if the issue reappears.

5. Change your DNS servers

Sometimes Unidentified network error can appear due to problems with your DNS. However, you can easily change your DNS and fix this issue.

Also, check the settings from your ISP and verify it they correspond with the ones from your IPv4 properties.

If this solution doesn’t work, we have a guide on what to do if the DNS server is not responding on Windows 10/11 because it may help you.

6. Install a reliable VPN

Installing a VPN software will help with any errors related to network connections and restrictions most of the time, including the Ethernet unidentified network.

A VPN will redirect the user’s data to another network which will make tracking his real location and other sensitive information impossible. This is a safety measure that can also be used to bypass annoying regional restrictions.

We suggest using a VPN that has lots of servers around the world, thus providing high internet speeds and lots of bandwidth. Access your content things from anywhere in the world, secured and bug-free.

7. Restart your PC

According to users, sometimes you can fix this problem simply by restarting your PC.

It seems that Windows 10 can sometimes hold your personal files, and that can cause Unidentified network message to appear.

8. Reset the Internet settings using Command Prompt

8.1 Use the ipconfig commands

8.2 Reset winsock

Several readers reported that they fixed the issue using different set of commands. Instead of commands that we used in Step 2, use the following commands:

8.2 Use the netsh commands

There’s also another set of commands that might fix the issue. According to our readers, you can fix Unidentified network message simply by running these commands in Command Prompt:

After the commands are executed, restart your PC and check if the issue is resolved.

9. Make sure that DHCP is enabled

A few of our readers reported that you can fix this problem by diagnosing your network. This is rather simple, and you can do it right from Network Connections window.

However, the Unidentified network message might appear if you don’t have DHCP enabled on your router. To fix the problem you need to open your router settings and enable DHCP again.

If you don’t know how to do that, be sure to check your router’s instruction manual.

10. Disable and enable your network connection

Sometimes you can fix Unidentified error message simply by disabling and reenabling your network connection.

Expert tip:

11. Set a static IP address

According to users, this issue can occur if your IP address isn’t set to static. To fix the problem you need to change your network connection settings and enter the desired IP address manually.

There are several cases in which users fixed the problem simply by using Obtain an IP address automatically option. If you’re using a static IP address, be sure to try this option instead.

12. Use an external adapter

If you have problems with your network adapter, you might be able to fix them simply by replacing the adapter.

Several users reported that the issue was caused by an internal adapter that isn’t fully compatible with the router.

If you have the same problem, you might want to get a USB network adapter and try using it instead.

Before you can use an external adapter, we strongly suggest that you disable your internal network adapter by following the steps above.

13. Change your adapter’s duplex

Sometimes Unidentified network message can appear if your duplex isn’t properly configured. After changing the duplex speed, be sure to check if the problem is resolved.

14. Disable McAfee Network Agent

As we previously mentioned, third-party applications can sometimes interfere with your network connection and cause Unidentified network message to appear.

Several users reported that McAfee Network Agent caused this issue on their PC. In order to fix the problem, you need to disable this service.

After disabling the problematic services, the issue should be resolved completely.

15. Restart your modem and router

The Unidentified network message can prevent you from accessing the Internet, but you can fix it easily by restarting your router and modem.

You should find the Reset button in the back of your router

Sometimes your network configuration might not be correct, and a quick restart can usually solve that. To restart your modem / router, simply press its reset button and wait for 30 seconds.

After that, turn the device back on again and wait until it starts. If you have both modem and router, be sure to restart both devices.

Sometimes this error appears due to your router’s configuration. A few users reported that they successfully fixed the issue simply by resetting their router.

To do that, find and press the reset button on your router. Alternatively, you can open the router’s configuration page and reset it from there.

Keep in mind that resetting the router will revert all your settings to default, so you’ll have to set up a wireless connection and configure all your settings again.

16. Upgrade router firmware

Make sure that the router and PC are connected.

Open a browser window and enter the address of your router. The one in our screenshot is only an example. You will find that on your router manual or on the device itself.

Log into the app with the username and password provided.

Locate the firmware update option and check for updates.

If you’re getting the Unidentified network no internet access Windows 10 or Windows 11 message, you might be able to fix it by upgrading your router firmware. By updating router firmware you can fix many compatibility and security issues with your router.

We have to mention that the firmware upgrade process comes with certain risks, so if you’re not careful you can cause permanent damage to your router.

To avoid any problems be sure to check your instruction manual thoroughly before performing the upgrade.

If you need more information about firmware upgrade, be sure to check our guide on how to upgrade your router firmware for some tips.

17. Use only one network connection

The Unidentified network message can appear if you’re using both Ethernet and wireless connections at the same time. If that’s the case, you’ll need to disable one connection and restart your PC.

For detailed instructions on how to disable your network connection be sure to check Solution 10. After disabling Ethernet or wireless connection, restart your PC and check if that solves the issue.

If that doesn’t work, you’ll need to bridge your connections just as it’s shown in our solution above. After bridging the connections, check if the problem is resolved.

18. Check your network connection properties

Third-party applications can sometimes cause problems with your network connection.

some of our readers reported issues with the Shrewsoft applications, so if you see any Shrewsoft entries on the list, be sure to uninstall them.

It’s worth mentioning that other third-party applications can cause this problem, so you might have to remove them as well.

19. Disable virtual network adapters

If you’re using any virtualization software, such as VMWare or VirtualBox, you can sometimes cause issues with your network connection.

Users reported that virtual machine software can cause the Unidentified network message by creating virtual network adapters.

To fix the problem, you need to disable virtual adapters from Device Manager. Disabling third-party virtual adapters can affect the Internet connectivity in those apps, so keep that in mind.

20. Change startup type for Bonjour service

According to users, the Bonjour service can cause internet issues and the Unidentified network message to appear.

To fix this problem, you just need to change the startup type of the Bonjour service as shown above.

Several users reported that Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 service can also cause this problem.

21. Delete the gateway

Several users reported that the issue is caused by the gateway courtesy of Adobe CS3 Bonjour, but you can fix the issue simply by removing the gateway.

22. Change the Power Management settings for your adapter

If you’re getting the Unidentified network message while using a Wi-Fi network, you might be able to solve it by using this method.

According to users, you can fix this problem with ease simply by changing Power Management settings of your adapter.

After making the aforementioned changes, the problem should be completely resolved.

23. Change your Roaming Sensitivity

A few users reported that you can fix the problem simply by disabling Roaming Sensitivity, so be sure to try that as well.

24. Change your router’s encryption

Wi-Fi networks usually use encryption in order to prevent unauthorized access. Some of our readers reported that they fixed the problem simply by changing the network encryption on their router.

Usually, you will find the option in the Wi-Fi settings section under the Security section but that depends on your router brand, model, and software.

We also have a Wi-Fi and connectivity issues guide for Windows 10/11 that will further help you fix all kinds of connection problems so make sure to check it out.

25. Enter your MAC address manually

If you’re getting the Unidentified network no Internet message, you might be able to fix it simply by entering your MAC address manually.

How do I fix

Ethernet unidentified network

in Windows 11?

Although it has some new features and design, Windows 11 is not all that different from Windows 10 and our readers have encountered all sorts of Internet connection problems in the new OS.

The Ethernet unidentified network and Unidentified network no Internet errors in Windows 11 are just as common because they are caused by the same problems.

Luckily, the similarities between the two systems will help you solve these problems by applying all the solutions we presented for Windows 10 above on the new OS.

In Windows 11, you can access the Advanced network settings easier

There are, of course, a few differences. For instance, in Windows 11 is a lot easier to access the Advanced network settings from the Network & internet section in Settings.

However, should you require further information, check our guide on what you can do if you can’t connect to the network in Windows 11. It will help with Internet connectivity problems.

The Unidentified network message can prevent you from accessing the Internet, but you should be able to easily fix the problem by using some of our solutions listed above. We hope they helped!

If you switched to the new OS, we can also help you with a fix if the Windows 11 Ethernet is not working that will provide a lot more information.

Was this page helpful?


Fix Ipv6 Connectivity, No Network Access Error On Windows 11/10

Some Windows users may encounter the IPv6 Connectivity, No network access error when attempting to connect to a network on Windows 11 or Windows 10 computer. In this post, we identify the potential triggers, as well as provide the most adequate solutions to remediate the issue.

Why does IPv6 say No network access?

If you have encountered the IPv6 No internet access problem on your Windows PC, it’s most likely due to you’re using the wrong ethernet driver or it’s out of date or corrupted or damaged. In any case, to resolve the issue, update your ethernet network card drivers. The most likely culprits to this error include-

Incorrect HT Mode settings.

Obsolete network adapter drivers.

Incorrect DNS and IP addresses.

Third-party antivirus software.

Fix IPv6 Connectivity, No network access error

If you’re faced with this IPv6 Connectivity, No network access error, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Restart PC and Internet device

Temporarily disable third-party security software (if applicable)

Uninstall VPN client (if applicable)

Run Network Troubleshooter

Release/Renew IP, reset Winsock and flush DNS

Update Network card drivers

Disable IP Helper service

Set Network Adapter to HT mode

Set IP and DNS address to Automatic

Use IPv4.

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Before you try the solutions below, make sure IPv6 is enabled and also check for updates and install any available bits on your Windows device and see if the error reappears.

1] Restart PC and Internet device

Your first line of action in resolving theerror is to restart your PC as well as your internet device (modem/router).

2] Temporarily disable third-party security software (if applicable)

This solution requires you to disable, or better still uninstall any third-party security software installed on your Windows 10/11 PC, using the AV dedicated removal tool.

3] Uninstall VPN client (if applicable)

If you are actively connecting via a VPN on your Windows PC you may encounter this error. In this case, you can uninstall the VPN software and see if that helps resolve the issue.

4] Run Network Troubleshooter

This solution requires you to run the Network Troubleshooter to resolve any network-related issues on your Windows 11/10 computer.

5] Release/Renew IP, reset Winsock, and flush DNS

This solution requires you to release and renew IP, reset Winsock, and flush DNS. If this operation fails to resolve the issue, proceed with the next solution.

6] Update network card drivers

Obsolete, damaged or corrupted network card drivers can trigger this error. In this case, to rule out this possibility, you can update your network adapter drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the network card hardware manufacturer’s website.

7] Disable IP Helper service

This solution requires you to disable the IP Helper service and see if the issue at hand is resolved.

8] Set Network Adapter to HT mode

HT mode allows you to specify which modes to support High Throughput (802.11n) and/or Very High Throughput (802.11ac).

This solution requires you to set the network adapter to HT mode on your Windows PC. Here’s how:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.

Select HT mode under Property section.

Exit Network Connections control panel.

Restart PC.

Check if you can now connect to the network; otherwise, try the next solution.

9] Set IP and DNS address to Automatic

Do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.

 In the General tab, make sure the radio button is set to Obtain an IP address automatically and Obtain DNS server address automatically.

Exit Control Panel.

Restart PC.

If you’re still unable to connect to the network using the IPv6 protocol, try the next solution.

10] Use IPv4

If none of the listed solutions in this post has worked for you, you can use IPv4 since IPv6 is not mainstream anyways. To use IPv4 on your Windows PC, you need to disable IPv6 and then your system will automatically default to IPv4 protocol.

Hope these solutions help you!

Is IPv6 faster than IPv4?

Based on tests carried out, IPv4 comes out on top. In theory, that IPv6 could be faster than IPv4 is predicated on the fact that cycles don’t have to be wasted on NAT translations. However, IPv6 also has larger packets, which may make it slower for some use cases – but with time and fine-tuning, IPv6 networks might become the de-facto protocol and will get faster.

Related post: Fix Unable to contact your DHCP Server error on Windows.

How To Fix Error 0Xa00F4292 On Windows 10/11

How to Fix Error 0xa00f4292 on Windows 10/11 [Fully SOLVED]




The webcam device is a must-have nowadays since it allows better interactions between people over the Internet.

Unfortunately, improper driver installations, dated hardware, or even permissions that haven’t been granted can cause issues with your webcam’s functionality.

Start with allowing your computer access to the camera, then follow the next effective solutions to solve this issue safely.

If you need more guidance, don’t hesitate to approach dedicated support for driver matters. 



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Encountering the Windows 10 error 0xa00f4292 is not good news for your computer’s camera. This error is related to the camera not working properly and it is most likely caused by corrupted or missing drivers.

This error can also occur due to a recently installed update for Windows 10, or due to corrupted drivers. For these reasons in this article, we will explore some of the best methods to try out in order to sort this issue out.

Why does Could not retrieve the camera image timeout has occurred message appear?

This error message is usually followed by error code 0xa00f4271 and it appears if your computer isn’t allowed to access the camera, so you might want to check your settings.

There are many other issues that can give you Something that went wrong camera error and to fix it, you might have to update your drivers to ensure the compatibility of your PC and the device.

Lastly, it’s also possible that your laptop camera isn’t working due to some other reason, but luckily, this article is here to help you.

How do I fix camera error 0xa00f4292? 1. Allow your computer access to the camera 2. Allow Camera app access through your PCs firewall or antivirus software

To allow camera access through third-party antivirus software (steps vary depending on software):

Additionally, always make sure that your drivers are up-to-date. Your camera may not function at its best potential if your drivers are old.

To safely update your camera drivers, we recommend you use a third-party driver updater program, that will keep you away from any potential harm. Outbyte Driver Updater is our main suggestion due to its effective automated process of finding, installing, and updating drivers.

⇒ Get Outbyte Driver Updater

4. Uninstall and reinstall your webcam driver

For this solution, you can also use the third-party app recommended above for efficiently uninstalling and reinstalling your webcam drivers.

In today’s fix article, we explored some of the best troubleshooting methods to deal with the Windows 10 error 0xa00f4292 that affects your computer’s camera.

This article is part of our dedicated hub for troubleshooting Windows 10 errors, so make sure you visit it in case you ever have problems with your OS again.

Was this page helpful?


How To Fix Bluetooth Connection Problems On Windows 10.

Bluetooth is one of the quickest, easiest and most efficient ways to connect an assortment of devices to your computer. From smartphones and headphones to mouse and keyboards. The list is continually growing. Most of the time the process of connecting Bluetooth devices is simple and pain-free, with devices cooperating as intended. On odd occasions though, things can get somewhat tricky and some troubleshooting is needed.  

How to Remove all Bundled Apps From Windows 10.

There are quite a few different reasons in which a Bluetooth connection might need troubleshooting. In this article, we will cover as many of the errors and troubleshooting options as possible. Depending on your particular issue, feel free to skip ahead to any specific category on the list at any time. 

Bluetooth OPP Support.

The first thing to get out of the way is that Windows 10 uses Bluetooth Object Push Profile (OPP) to transfer files. If your peripheral (phone/tablet etc) doesn’t support Bluetooth OPP, file transfer won’t work.

Note: If you are unsure if your manufacturer supports this, head on over to their website and double check before continuing with troubleshooting steps.

How to Fix Bluetooth Missing in Settings On Windows 10.

If Windows has a hard time trying to find the driver automatically, there are a few steps you can take, the first is to visit your computer manufacturer’s website. On the manufacturer’s website (usually the support page) you can enter your device’s serial number to get a complete list of drivers for your computer, when they appear, pick your Bluetooth driver, download it and install.

Note: In the case you are using an aftermarket attachment PCI card or a USB device, you can visit the device makers web page to grab a driver download for the offending item.

How to Fix Bluetooth Missing in Device Manager On Windows 10.

An Alternative Scenario.

How to Fix Bluetooth Device Connection When paired on Windows 10.

If your device uses a PIN to pair, you will find the information in the manual that came with it or underneath on the sticker. If you have lost both, you can Google search for the default PIN or try 2 of the most used default pins 0000 and 1234.

How to Fix Bluetooth After Upgrading to Windows 10.

If you have recently upgrade your older computer to Windows 10 and your Bluetooth isn’t working, there is a possibility that the device isn’t supported anymore. You can check the list below to see if your device meets the following standards, as it must support one of these Bluetooth Profiles:

Advanced Audio Distribution Profile (A2DP 1.2)

Audio/Video Remote Control Profile (AVRCP 1.3)

Bluetooth LE Generic Attribute (GATT) Client

Dial-up Networking Profile (DUN 1.1)

Device ID Profile (DI 1.3)

Hardcopy Cable Replacement Profile (HCRP 1.0)

Hands-Free Profile (HFP 1.5)

Human Interface Device (HID 1.1)

HID over GATT Profile (HOGP 1.0)

Object Push Profile (OPP 1.1)

Personal Area Networking User Profile (PANU 1.0)

Serial Port Profile (SPP 1.2)

Note: To find out what profiles your device supports check your manufacturer’s website for details.

How to Fix Bluetooth Won’t Transfer Files to and From Windows 10.

Fix Network & Internet Connection Problems In Windows 11/10

If you find that your internet connection in Windows 11 or Windows 10 has suddenly stopped working or that you are facing certain Network and Internet connectivity problems, here are a few troubleshooting steps you may want to try.

Fix Network & Internet connection problems in Windows 11/10

You can use the following methods or tools to fix Network & Internet connection problems in Windows 11/10:

Renew IP address

Flush DNS cache

Run Network & Internet Diagnostic Troubleshooters

Enable or Disable IPv6

Reset Winsock

Reset TCP/IP

Reset Hosts file

Reset Windows Firewall settings to default

Reset your browser

Run Network Reset.

These suggestions are followed by other fixes too. Take a look at them!

1] Renew IP address

IPConfig is a tool built into Windows, that displays all current TCP/IP network configuration values and refreshes Dynamic Host Configuration Protocol DHCP and Domain Name System DNS settings. You can access this tool via the command line. If you have a bad IP address, then renewing your IP address this way may help solve your internet problems.

Type cmd in start search and press Ctrl-Shift-Enter. If you wish, just out of curiosity, you may type ipconfig and hit Enter, to view the status of the computer’s Internet Protocol or IP address.

Type ipconfig /release to let go of the current IP address.

Next, type ipconfig /renew to obtain a new IP address.

If you get an error message when you Run the “Ipconfig /Renew” command see KB810606.

If you recurrently face this problem, then you can have it renewed on every start-up, by creating the following .bat file and placing it in your startup folder.

Open Notepad and type:

ipconfig /release ipconfig /renew

Save it as, say, chúng tôi file.

Read: How to find out, renew, change IP address.

2] Flush DNS cache

Frequently, internet connection problems can also be traced to a corrupted DNS cache. Resetting or Flushing this cache is an easy fix to many of these problems. This is how you can flush Windows DNS cache in Windows 11/10, Windows 8/7 or Windows Vista.

ipconfig /flushdns

You should be able to see a confirmation dialog window:

Windows IP Configuration. Successfully flushed the DNS Resolver Cache.

Next, type ipconfig /registerdns and hit Enter.

This registers any DNS records that you or some programs may have recorded in your Hosts file.

Just in case you are interested, to view the complete syntax for this command type ipconfig /help and hit Enter!

3] Run Network & Internet Diagnostic Troubleshooters

The Network & Internet Diagnostic & Repair Tool in Windows 11/10/8/7/Vista will help you identify the potential issues preventing network connectivity, and it automatically takes appropriate steps toward correcting them. If a computer on the network loses Internet connectivity, you can graphically see which connection is down and then use Network Diagnostics to help determine the cause of the problem and find possible solutions.

Type the following commands in Run box and hit Enter to open the required Troubleshooters directly:

To open Internet Connections Troubleshooter:

msdt.exe -id NetworkDiagnosticsWeb

To open the Incoming Connections Troubleshooter:

msdt.exe -id NetworkDiagnosticsInbound

To open the Network Adapter Troubleshooter:

msdt.exe -id NetworkDiagnosticsNetworkAdapter

Go here if the Troubleshooter throws up Windows couldn’t automatically bind the IP protocol stack to the network adapter message.

4] Enable or Disable IPv6

Enable or Disable IPv6 to solve Internet connectivity problems. By default, Windows prefers IPv6 over IPv4. So if you are having problems using IPv6 to connect to some websites, you can configure your Windows to select IPv4 instead of IPv6.

5] Reset Winsock

Reset Winsock and see if that helps. Windows Sockets or Winsock is a technical specification or a programming interface which decides how any program handles input/output requests for Internet applications, i.e., TCP/IP in Windows.

6] Reset TCP/IP

Reset TCP/IP and see if that works. TCP/IP is one of the core components required by your Windows computer to connect successfully to the Internet.

7] Reset Hosts file

Reset Hosts file and see if that helps. The Hosts file in Windows 11/10/8/7, is used to map host names to IP addresses. If for some reason, you find that your Hosts file has been compromised or corrupted and you cannot connect to the internet, you can if you wish, reset Hosts file back to default.

8] Reset Windows Firewall settings to default

Reset Windows Firewall settings to default. This will help if the firewall ahs been configured wrongly and it blocks connections.

9] Reset your browser

These posts will show you how to Reset Edge, Chrome, Firefox or Internet Explorer

10] Use Network Reset

The Network Reset feature in Windows will help you reinstall Network adapters and reset Networking Components to their original settings.

There are other free tools like NetChecker, NetAdapter Repair or Complete Internet Repair Tool. that may help you fix your internet connection problems.

Other links to related error messages:

Hope something helps!

Update the detailed information about How To Fix “No Internet, Secured” Message On Windows 10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!