Trending December 2023 # How To Fix ‘Bad System Config Info’ Error In Windows # Suggested January 2024 # Top 18 Popular

You are reading the article How To Fix ‘Bad System Config Info’ Error In Windows updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Fix ‘Bad System Config Info’ Error In Windows

Bad System Config Info is a common bug check error on Windows systems, caused mainly by a malfunctioning of the system and registry files or the Boot Configuration Data (BCD) file. Some boot order files in the BCD, or even some older ones, may conflict with newer, stable files. When this happens, the error otherwise known as the Blue Screen of Death (BSoD) occurs.

The bug check error can also be caused by:

faulty hardware

incorrect system settings

a bad driver

installing an important update

However, most error messages will often have a description of what the problem may be. Below are some tried and tested solutions to help you fix a Bad System Config Info error in Windows 10 and 11.

1. Try Restarting Your Computer

There’s a reason that many IT people jokingly ask, “Have you tried turning it off and on again?” It’s because, in many cases, a simple restart can clear the issues your PC is having. Before you try anything else, give this suggestion a try.

If this error started occurring soon after a Windows update, then that probably is where your problem lies, and the solution should be simple: roll back the Windows update!

3. Check your RAM and Hard Drive

For some, it may seem daunting to look inside your PC and start twiddling around with the physical components. However, the health and fitting of your RAM and hard drive can be the cause of the bad system config info error.

Your RAM sticks will look a bit like this. Make sure they’re nice and snug in their slots

If you’re comfortable with opening up your PC, you can take a look inside to make sure that your RAM is correctly fitted into the slots and that your hard drive SATA cables are properly connected too.

These checks shouldn’t take more than a couple of minutes.

If you have more than one RAM stick, you could even remove the excess sticks so that only one is left, and see if the error goes away. If the error only appears when certain RAM sticks are slotted in, then it’s likely those sticks are causing the error, in which case you may need to run your PC on less RAM (and, down the line, look into buying new RAM).

Assuming your RAM and hard drive are properly fitted, you should then check on the health of your RAM and health of your hard drive, both of which we have guides for here on the site. If you get back bad results on either front, this could be causing the errors, and it may be time to look into replacing the relevant components.

Incompatible or outdated drivers are a source of several issues. The worst thing bad drivers can do is bring up BSoD errors, such as the Bad System Config Info.

To resolve this, followo the instructions below:

5. bcdedit Command

Quite often the Bad System Config Info error can appear when system configuration is incorrect or not configured properly. Additionally, the error will also appear if the memory and processors in the configuration file have the wrong value, preventing access to Windows 10 and Windows 11.

To resolve this, you’ll need to go to the Advanced Startup menu:

    In the Troubleshoot window, select “Advanced Options.”

      In the Advanced Options window, select “Command Prompt.”

        Your computer will restart, then display the Command Prompt blue screen. You’ll be asked to select an account to continue. Press Enter, then type in your password for that account.

        Enter the following lines once Command Prompt starts:







        numproc bcdedit







          Close Command Prompt.

          Start Windows again.

          6. Fix BCD file

          If your BCD file is corrupt or damaged, the Bad System Config Info error may appear and deny you access to Safe Mode and Windows altogether.

          To resolve this, you need your bootable USB flash drive with Windows or the installation DVD. You can also use the Media Creation Tool if you don’t have a bootable USB drive.

          Here’s what to do next:

            Enter the following lines when Command Prompt starts. (Press enter after each line to execute it.)



            repairbcd bootrec


            osscan bootrec



              Close Command Prompt.

              Restart your computer.

              Note: the last command you enter will delete, then recreate Master Boot Records. Be careful using it.

              7. Fix the Registry

              There are specific registry issues that can bring up the error, but you can repair the registry to resolve it by following these steps:




              C:WindowsSystem32configDEFAULT DEFAULT.old


              C:WindowsSystem32configSAM SAM.old


              C:WindowsSystem32configSECURITY SECURITY.old


              C:WindowsSystem32configSOFTWARE SOFTWARE.old


              C:WindowsSystem32configSYSTEM chúng tôi the folders of each of these commands are renamed as you press Enter, and once this is done, Windows won’t use them again. They can be deleted, but you’re better off renaming in case you need to do a system restore much later.

              4. Enter the lines below into Command Prompt:


              C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32config


              C:WindowsSystem32configRegBackDEFAULT C:WindowsSystem32config


              C:WindowsSystem32configRegBackSAM C:WindowsSystem32config


              C:WindowsSystem32configRegBackSECURITY C:WindowsSystem32config


              C:WindowsSystem32configRegBackSYSTEM C:WindowsSystem32config


              C:WindowsSystem32configRegBackSOFTWARE C:WindowsSystem32config

              This process copies the registry’s backup and replaces old files. Close Command Prompt and restart your PC.

              8. System Restore

              If the other methods don’t help, this may be one of your last two solutions to try. Note that you will not be able to use this method if you don’t have saved restore points to pull from. However, the system will let you know if you don’t. To perform a system restore, follow the steps below.

                Move to the “System Protection” tab, then select “System Restore.”

                9. Reset Windows 10/Windows 11

                This is the last solution to try if none of the others worked. Before resetting, create a backup, as once you reset Windows, all files will be deleted from the C partition.

                The reset should fix the problem if it was related to your PC’s software.

                Frequently Asked Questions How can I find Windows Stop Codes like this and fix the errors?

                There are third-party apps that can help you look for stop codes in your system’s programming. BlueScreenView is the most notable one.

                How do I boot in Safe Mode?

                Sometimes BSoD errors make it hard to perform any of the suggested fixes in this article. In that case, you can try booting in Safe Mode by holding down the F8 key while starting Windows. Then, switch to Safe Mode before the system finishes loading.

                Can Windows automatically repair a Bad System Config error?

                Anytime Windows has trouble booting properly, the Windows Automatic Repair tool will run as a way to fix the error. Unfortunately, this isn’t always a helpful solution for BSoD errors.

                Image credit: Pexels Screencaps taken by Megan Glosson

                Megan Glosson

                Megan Glosson is a freelance technology writer based in Nashville, TN. She has extensive experience working with everything from printers to smart home systems, and serves as the go-to “tech guru” for a small business that sells digital products. Megan has created thousands of articles for online publications and company blogs, including How-To Geek, Clean Email, and Review Geek.

                Subscribe to our newsletter!

                Our latest tutorials delivered straight to your inbox

                Sign up for all newsletters.

                By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

                You're reading How To Fix ‘Bad System Config Info’ Error In Windows

                10 Easy Ways To Fix File System Error In Windows 10

                10 Easy Ways to Fix File System Error in Windows 10 Facing file system error? Apply these fixes to resolve it




                FILE SYSTEM error (-2147219196) is often caused by faulty hardware or incompatible driver software.

                If your Windows 10 crashes with the FILE SYSTEM error (-2147219196), update the drivers.

                Using a third-party tool that addresses BSoD errors is one of the best and safest solutions you can try.

                Check your hardware if nothing works, and the FILE SYSTEM error keeps appearing in Windows 10.



                Fix all BSoD events and keep them away:

                Fortect is a tool that checks your Windows OS for bad or corrupted system files. Once found, it can replace these versions with a fresh one from its repository with original Windows System files. Thus, it will restore your system to a fully functional chúng tôi is how to do it in 3 easy steps:

                Download and Install Fortect on your PC

                Launch the tool and Start scanning to find broken files that are causing the problems

                Fortect has been downloaded by


                readers this month.

                Blue Screen of Death errors are probably one of the most dreaded errors on Windows, and rightfully so.

                These errors are often caused by faulty hardware or incompatible software, and in some cases, these errors can prevent Windows 10 from starting. 

                You can encounter the FILE SYSTEM error (-2147219196) while opening a picture in Windows Photo App, or using the Windows Update might also cause this particular error.

                As you can see, BSoD errors can be rather serious, but you can fix the FILE SYSTEM error (-2147219196) and any other FILE SYSTEM errors by following one of our solutions.

                What is File System Error (-2147219196)?

                A File System error has reportedly been troubling users after they updated their Windows PCs with a new update.

                This error prevents you from using certain apps on your PCthis error basically interferes with the PC’s smooth functioning of the PC.

                Notably, users have reported facing the File System error on the Photos app, Calculator app, or other Windows apps.

                Here are some of the error codes you may come across:

                File system error (-1073741819)

                File system error (-2023374635)

                File system error (-805305975)

                What causes file system error?

                The File System error is usually due to a problem with the disk. It includes bad sectors, corrupt files, or hardware issues with the disk.

                Also, improper Windows Updates are often found to be an underlying cause here. Besides, another reason behind the File System error is the presence of malware or virus on the computer.

                How can I fix the File System error in Windows 10? 1. Run the BSOD Troubleshooter 

                The Troubleshoot tool is a Windows 10’s built-in tool. The troubleshooter can help you resolve all sorts of issues, including the BSOD problems.

                2. Use a third-party BSoD fixer

                Using dedicated software is a quick and safe method to fix this issue. It is very much possible to manually remove the issue, but it is way more time-consuming and you may cause even more problems if you are not sure what you’re doing.

                Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.

                Dedicated driver updater software will also remove the major risks that come with installing faulty drivers because they can detect the version of your hardware and find the perfect driver for it.

                These tools are typically very easy to use and light and can help you with other driver-related issues. They can detect whether your system has missing or corrupt drivers and fix them in just a few minutes.


                Because the FILE SYSTEM error (-2147219196) can also be caused by the Photo app from Windows, you can try to update this particular app. Also, you can update the Windows if there is any update available.

                5. Run the SFC scan

                Open the Windows search bar and type cmd.

                Open Command Prompt (Admin).

                Enter the following line and press Enter: sfc/scannow

                Wait until the process is done (it may take a while).

                If the solution is found, it will automatically be applied.

                Now, close the Command Prompt and restart your computer.

                This command-line tool, System File Checker, resolves various issues within the system, and it might be helpful for dealing with FILE SYSTEM errors, as well.

                6. Run DISM Standard way With the Windows installation media 7. Remove your antivirus software

                Users reported that certain software, most notably Computer Associates EZ eTrust Antivirus can cause this issue to appear. According to users, disabling this software permanently fixes the FILE SYSTEM error.

                We have to mention that almost any antivirus software can cause Blue Screen of Death errors on almost any version of Windows.

                Dedicated uninstallers can also force remove any malicious or stubborn app on your PC without affecting any other files or software.

                They are generally very straightforward. You get a list of all your apps and select which one you want to remove. Wait for the process to finish and check if the error persists.

                If you’re looking for an alternative antivirus program, feel free to check this guide including the best antivirus programs for Windows 10.

                8. Perform Chkdsk scan 9. Reset Windows 10

                After completing this process, you’ll have a new installation of Windows without any files, so you’ll have to install all your applications again.

                10. Check for faulty hardware

                If the problem still persists, even after you’ve reset Windows 10, then the FILE SYSTEM error (-2147219196) is caused by faulty hardware or recently installed hardware.

                RAM modules are the most common causes of this error, and in order to check your RAM, you need to download and run MemTest86+ for a couple of hours.

                If your RAM is working properly, some other hardware, such as your motherboard or hard drive might be causing a FILE SYSTEM BSOD error, so you might need to replace it.

                How do I fix the File System error on Windows 11?

                While the above solutions are sufficient enough to resolve the File System error on Windows 11, you can also check out our dedicated guide that will help you resolve the problem specifically on your Windows 11 PC.

                FILE SYSTEM BSoD error can cause a lot of problems on your PC, but hopefully, you managed to fix it by using one of our solutions.

                Still experiencing issues?

                Was this page helpful?


                Start a conversation

                Fix Insufficient System Resources Exist To Complete The Api Error On Windows 11/10

                In this article, we will see some solutions to fix the Insufficient system resources exist to complete the API error on a Windows 11/10 computer. This error code is associated with the hardware, either the laptop’s touchpad or a USB device. The users who experienced this error have stated that their laptop’s touchpad and some of the USB devices connected to their systems have stopped working suddenly. On viewing the Properties of the device driver in the Device Manager, they saw the following error message:

                This device cannot start. (Code 10)

                Insufficient system resources exist to complete the API.

                The most common cause of this error is corrupted or outdated device drivers. Apart from this, there are some other causes of this error, like insufficient or low disk space. In this article, we have listed some solutions that may help you get rid of this problem.

                Insufficient system resources exist to complete the API in Windows 11/10

                As explained above, low memory or disk space can also trigger this error. Therefore, first, close all the running programs to free up some RAM. If this does not fix the problem, try to free up some disk space. You can move your data from your computer’s hard drive to an external hard disk or you can upload your data to free cloud storage services, like Google Drive, OneDrive, etc.

                If you see this error message in the Device Manager, you can try the solutions explained below to fix the problem.

                Run the Hardware and Devices Troubleshooter

                Update your device driver

                Install the driver in Compatibility mode

                Use another USB port

                Troubleshoot in a Clean Boot state

                Perform a System Restore

                Reset your PC

                Let’s see all these fixes in detail.

                1] Run the Hardware and Devices Troubleshooter

                You can run the Hardware and Devices Troubleshooter and see if it fixes the problem. In the earlier version of Windows 10, the Hardware and Devices Troubleshooter was available in the Settings app. But in the later versions, Microsoft has removed it from the Settings. But you can still run this troubleshooter on your Windows 11/10 device by executing the following command in the Command Prompt.

                msdt.exe -id DeviceDiagnostic 2] Update your device driver

                As explained earlier in this article, the most common cause of the problem is the corrupted or outdated device driver. Therefore, we suggest you update your device driver from the Device Manager. The steps for this are explained below:

                Select the driver of the device you are experiencing the issue with.

                Now, select the Search automatically for drivers option.

                3] Install the driver in Compatibility mode

                If updating the device driver did not fix your problem, you can try installing the driver in the Compatibility mode. First, uninstall the driver from your Device Manager. After uninstalling the driver, open the location on which you have downloaded the driver from the manufacturer’s website. Now, follow the steps below:

                Enable the “Run this program in compatibility mode for” checkbox.

                Select the older version of Windows from the drop-down list.

                4] Use another USB port

                If you are experiencing an issue with your USB device, connect it to another USB port and check if the problem persists. For some users, connecting the USB device to USB 3.0 instead of the USB 2.0 port fixed the problem. If you have already connected your device to the USB 3.0 port, disconnect it from that port and connect it to the USB 2.0 port.

                5] Troubleshoot in a Clean Boot state

                The problem might be occurring due to some conflicting programs installed on your device. You can check this by troubleshooting your system in a Clean Boot state. If you find a problematic program on your system, uninstall it and then check if the problem disappears.

                6] Perform a System Restore

                The System Restore has fixed the problem of some users. It is a tool developed by Microsoft that helps users protect and repair their computers. When you run this tool, it creates a snapshot of the Windows System Image files and Windows Registry and saves them as a restore point. If any problem occurs on a Windows computer, the System Restore Point helps users to take their systems to the previous working state without reinstalling the Windows operating system.

                If you have created a system restore point, running the System Restore can help you fix this problem.

                7] Reset your PC

                If the System Restore tool did not fix the issue, you can reset your PC to fix this problem. Before resetting your PC, backup all your data on a hard drive.

                What is Code 10 in Device Manager?

                The Device Manager shows Code 10 when Windows cannot start hardware or a USB device connected to the computer. Code 10 is among the Device Manager error codes. You can experience this error with your laptop’s touchpad or any other USB device you connect to your computer, like a speaker, keyboard, mouse, etc. Due to this error, the hardware device does not work. The main cause of this problem is outdated or corrupted device drivers. However, some other causes can also trigger this error.

                Drivers are the software that develop a connecting link between the hardware and the operating system. If drivers get corrupted, the communication link between an operating system and the hardware device breaks due to which the hardware device does not work.

                Why do we have insufficient system resources? How do I fix Insufficient system resources exist to complete the API?

                You may see this error message in the Device Manager when your hardware or external USB device connected to your computer stops working. The main cause of the error is the corruption in device drivers. Hence, to fix this problem, you have to update or reinstall your device drivers.

                Hope this helps.

                Read next: Insufficient system resources exist to complete the requested service.

                0X8024002D: How To Fix This Windows Update Error

                0x8024002d: How to Fix This Windows Update Error Error 0x8024002d might be caused by corrupted system files




                Error 0x8024002d has been reported to occur when users try to install Windows updates related to Microsoft Office packages.

                This issue might be caused by corrupted system files or cached data for updates.

                Clearing the SoftwareDistribution folder could be another possible solution for Windows Update error 0x8024002d.



                To fix Windows PC system issues, you will need a dedicated tool

                Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

                Download Fortect and install it on your PC.

                Start the tool’s scanning process to look for corrupt files that are the source of your problem

                Fortect has been downloaded by


                readers this month.

                Error code 0x8024002d is an issue that arises for some users when they try to install security updates in Windows. That error displays a message along the lines of, There were problems installing some updates, but we’ll try again later… (update reference) Error 0x8024002d.

                What causes error 0x8024002d?

                Users can’t install patch updates for which error 0x8024002d arises via Settings. To fix error 0x8024002d, we recommend applying the potential Windows 11 solutions below.

                Also, Microsoft nor anyone else has identified a specific cause for error 0x8024002d. However, this issue can arise for similar reasons other Window Update errors occur, such as the following:

                There are corrupted system files – Updating Windows is a system process that can fail because of damaged system files.

                Corrupted data in the SoftwareDistribution folder – Corrupted (damaged) files in that cache can cause update errors to occur.

                Incorrectly configured or damaged update components – Some specific Windows Update components are damaged.

                Now that we know what causes this problem, let’s start fixing it with the solutions below.

                2. Run SFC and DISM scans

                The SFC and DISM scans will correct any system file problems or bad sectors on your drive.

                3. Erase data in the SoftwareDistribution folder

                This simple batch script resets all Windows Update components, like the SoftwareDistribution folder, BTS service, Cryptographic Services, etc.

                We also have a complete guide on how to reset the update components and you will find more information.

                5. Reset Windows 11 to factory defaults

                If error 0x8024002d persists after going through resolutions one to four, we recommend resetting Windows. That final solution will restore Windows to factory settings.

                Most of your software will not be preserved after a reset, but you can at least select to keep user files. Have a look at our how-to reset Windows guide for further details.

                Those potential error 0x8024002d solutions will address some of the more probable causes for updates failing. There isn’t any widely confirmed fix for this issue, but the ones above are worth a try.

                Yet, there could be more ways to resolve that issue as well. Users who’ve found different ways to fix error 0x8024002d are welcome to share their solutions below.

                Still experiencing issues?

                Was this page helpful?


                Start a conversation

                How To Fix Windows Bcd Boot Error 0Xc0000098?

                Windows BCD Boot Error 0xc0000098 mostly occurs if the Boot Configuration Data File (BCD) gets corrupted.

                This BCD file provides storage used for describing boot applications & boot application settings.

                When these BCD files get missing or corrupted, Windows does not boot up and displays the error message. Read through this article to know what causes the BCD file error and how to fix it.

                A bad RAM

                Damaged Hard Drive

                Changes made in the hardware

                Fortunately, there are solutions to fix Windows BCD errors. Follow the methods explained below and fix the error easily.

                A Startup Repair can fix issues with the files that are required to boot into Windows.

                So, run a Startup repair when you have received Windows BCD Boot Error 0xc0000098 and cannot boot into Windows normally.

                Follow the steps below to do so:

                With a bootable device, boot into your OS. When the Windows Logo appears, choose the Repair your Computer option.

                This will open the Advanced Startup Recovery menu.

                Next, select Troubleshoot.

                Once done, restart your PC. If you encounter the same error again, enter Safe Mode and perform further solutions.

                Safe Mode helps to start Windows in the basic state with minimal functionalities.

                Safe Mode enables you to detect the actual problem, and when you cannot boot into the PC primally, boot into Safe Mode.

                Follow the steps given below to enter Safe Mode:

                Go to the Advanced Startup Recovery Menu, as shown in the first solution.

                Choose Troubleshoot.

                Press F5 on your keyboard to enter Safe Mode with the networking option.

                Once you enter Safe Mode, now run the system file checker and DISM scans.

                Corrupted or missing system files can cause BCD Windows errors.

                So, run the System File Checker or SFC scan to check for missing or corrupted system files.

                So, follow the steps given below to run SFC scan:

                Type cmd in the Windows search box & select Run as administrator option.

                sfc /scannow

                Once Windows finishes scanning, run a DISM scan.

                DISM scan repairs the corrupted Windows images that can cause error 0xc0000098.

                Copy & paste the following command in the elevated Command Prompt window & press the Enter key:

                DISM /Online /Cleanup-Image /CheckHealth

                Once the scan finishes, restart your PC. If you still cannot boot into Windows normally,  run a Chkdsk scan.

                A Chkdsk scan helps to identify the damaged sector or any malfunction of your hard drive.

                To run the chkdsk scan, follow the method given below:

                Open an elevated Command Prompt window.

                Copy & paste the following command in the elevated Command Prompt Window and press Enter:

                chkdsk C: /f /r /x

                Wait till the scan gets completed. Restart your PC & see if the problem is resolved. If you still get the same BCD error, rebuild BCD.

                You can use chúng tôi tool available for Recovery to rebuild BCD.

                To finish the task, follow the instructions as given:

                Open an elevated Command Prompt window.

                Copy & Paste the following list of commands one after another and hit Enter after each command:

                bootrec.exe /rebuildBCD

                bootrec.exe /fixmbr

                bootrec.exe /fixboot

                If these commands fail, then enter the command given below:

                bcdedit /export C:BCD_backup


                CD boot

                attrib BCD -s -h -r

                ren c:bootBCD BCD.old

                bootrec /rebuildBcd

                Exit the CMD window and restart your PC. This should fix the BCD error.

                How do I force my PC to boot from a CD?

                To force your PC to boot from a CD, go to the BIOS settings and ensure that the optical drive is in the first boot sequence. This will ensure that your PC boots from a bootable disk.

                Why is my Windows not booting without a CD or USB?

                Ensure that the PC is set to boot from the external drive.

                You can manually take a step then your PC powers up to start it from the DVD or CD.

                What does error code 0xc0000098 on Windows 11 BCD mean?

                When you get error code 0xc0000098 on Windows 11, it will prevent you from booting into Windows normally. This happens when the BCD file gets corrupted or lacks the boot entries.

                Send us feedback if the above methods could help you fix Windows BCD Boot Error 0xc0000098.

                Write to us in the reply section below for any related suggestions or queries.

                How To Fix Windows 11 Update Error 0X800704F1.

                If you have updated your computer or surface device to Windows 11 but keep getting error 0x800704f1. This article will show you several different troubleshooting steps you can use that should solve the problem and get rid of Windows 11 update error 0x800704f1.

                Related: How to fix Protection definition update failed error 2147023293 on Windows 11.

                Windows update errors have been around for a long time and are some of the most annoying errors that currently appear on WIndows 11. They seem to randomly occur, don’t offer much information as to why they have occurred, and are equally as annoying to get rid of. Which is pretty much everything we have been experiencing since Windows 7 and earlier.

                Thankfully, nearly all the traditional troubleshooting steps and solutions that you’ve used over the past decade still work to solve these issues. Before you jump into the suggestions shown below, make sure you have restarted your router/modem and have restarted your computer. It’s also a good idea to try updating Windows 11 without a VPN or Proxy enabled, occasionally these cause issues. Once you’ve done all of those, continue below.

                Run the Windows Update Troubleshooter to fix update error 0x800704f1.

                Unlike on Windows10 the Windows Update Troubleshooter on Windows 11 actually helps solves problems. So it’s the obvious first choice when dealing with error 0x800704f1.

                Open the Settings app by pressing Windows Key + I.

                Here you will see a long list of troubleshooting options, however, the one you are looking for is near the top called Windows Update.

                After the tool completes its checks and fixes, you should be able to update your device.

                Try running the Windows SFC command.

                When you have Command Prompt open type the following command into Command Prompt and press Enter.

                sfc /scannow

                It may take some time to complete so be patient. If any errors are found they should be repaired automatically. If it doesn’t complete properly Restart your computer in Safe Mode and repeat the process.

                Fix Microsoft Store error 0x800704f1 on Windows 11 using the DISM tool.

                If the SFC tool returned an error message, open Command Prompt as Administrator, then enter the following commands in order.

                DISM /Online /Cleanup-Image /CheckHealth

                DISM /Online /Cleanup-Image /ScanHealth

                DISM /Online /Cleanup-Image /RestoreHealth

                Uninstall the last update. (Not always an option)

                If you have only just updated your computer, you can still uninstall the last update and go back to a version of Windows 11 that doesn’t have browser lag issues. If you haven’t uninstalled a Windows 11 update before, check out the guide below.

                How to uninstall a bad Windows 11 update. Rollback a Windows 11 update.

                Manually Update Windows 11 using the Microsoft Update Catalog.

                Another good option you can use to get past this error message is to use the Windows update catalogue. This allows you to find and download Windows 11 updates separately and install them as individual updates rather than letting Windows do it on its own. To do this simply visit the Microsoft Update Catalog and search for the update number you are trying to download. Kb2562397 for example.

                Update the detailed information about How To Fix ‘Bad System Config Info’ Error In Windows on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!