You are reading the article How To Clean The Inside Of Your Computer updated in February 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Clean The Inside Of Your Computer
Computers attract dust bunnies like magnets to metal, but this doesn’t mean they’re a compatible match. An overload of dust in your computer’s crevices means a drop in performance and potential overheating. Luckily, this can be fixed with a deep clean of your computer hardware. (Don’t worry, this isn’t as scary as it sounds.)
Here’s a step-by-step guide on how to safely clean the inside of your computer.
You will need:
Can of compressed airDismantle and Grounding
Start by powering off your computer and unplugging any attached cords.
Before removing the case to delve into those sensitive computer components, you’ll want to ground yourself by touching a metal surface. Grounding means to negate electrostatic discharge that you may accidentally transfer to computer parts, potentially rendering them useless. Although this is quite rare, it’s better to be safe in this regard.
Remove the outer case using a screwdriver and have your can of compressed air ready to do some serious dust sweeping.Utilizing Compressed Air
Most cans of compressed air come with a straw to attach to the nozzle, which is helpful for precise cleaning. If yours did not come with one, don’t worry, it’s completely optional.
When using compressed air, be sure to hold it at least six inches from any computer parts in an upright position. (holding the can in any other way or playing with it is asking for permanent skin, eye, or computer damage.)
Using short and quick bursts, blast any areas of caked dust: fans, power supply, motherboard, and around the perimeter of the tower/laptop.
For a deeper clean, unscrew and remove the CPU, graphics card, hard drive, and fans. Blow away any dust from these parts and if needed, use the Q-tips to clean away stubborn dirt.Cleaning Hard to Reach Places
Q-Tips are best used for difficult crevices as long as you’re not aggressively rubbing the cotton against the computer parts. You wouldn’t want any loose cotton bits floating around on the circuit board(s).
Alcohol-dipped Q-tips are also great for cleaning fan blades and hard-to-reach spots on your motherboard.
If you’re feeling overly ambitious, you can even give your motherboard an alcohol bath. Be sure to use at least a 90% alcohol solution and remove any excess parts before doing this. Soak the board for a few minutes (or longer depending on how badly soiled your board is). Remove the board and ensure it’s completely dry (this should be fairly quick due to the potent alcohol content) before re-installing it in your computer.
Following these steps, your PC/laptop should run more smoothly thanks to its new and improved dust-free environment.
Computers are hard-working machines that need a little love sometimes. Ensure your PC/laptop runs at its best by cleaning it at least once a year (twice a year if you have pets and three times if your cat likes to sleep atop the tower, like mine).
Image Credit: Circuitry
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
You're reading How To Clean The Inside Of Your Computer
Is your screen dirty and you want to clean it? This article explains how you can thoroughly clean your iPad’s touchscreen. It is very important you follow certain guidelines for cleaning your iPad’s display. Regular cleaning is essential. And sometimes you may want to disinfect your iPad. It is also important that you should keep your iPad clean and sanitary without damaging your device and screen to ensure that you’re getting the best experience from your iPad. Here is how:
If your screen is unresponsive, see this article.
Before you do anything, make sure that:
Your iPad is unplugged. Make sure that all cables are unplugged.
Your iPad is turned off. Here is how you can turn off your iPad:
iPad with Face ID models: Press and hold the power (side or top) and the volume up (or down) buttons together until you see the power off slider. Then drag the slider to turn off your iPad.
Other iPad models: Press and hold the side or top button until you see the power slider and then drag the slider.
Do not use excessive force when cleaning. Do not apply much pressure. Be gentle.
There are no liquids nearby.
See this article if your iPad is running slow.General cleaning
To clean, gently wipe your screen for fingerprints, dust, and lint.
Use a soft, lint-free cloth. The best option is a lint-free microfiber cloth. You may also use a camera lens cleaning cloth.
Do not use paper towels, washcloths or similar items as they may cause damage, for example, they may scratch your screen.
Do not use compressed or canned air.Stubborn stains cleaning
This cleaning includes cleaning ink, oils, lotions, makeup, food stains or similar. Clean your iPad’s screen immediately if your screen comes into contact with these types of stains.
Again use a soft lint-free cloth. This time lightly dampen a section of the cloth with distilled or tap water. And gently wipe the dirty area. Then dry the area with another soft, lint-free cloth.
if the material is still present, you may use a soft, lint-free cloth with warm soapy water. Wipe it over the iPad.
Make sure that you do not get moisture in any openings like the Lightning port, the speaker or mic.
Absolutely never submerge your iPad in a cleaning liquid or solution.How to disinfect the display
It is important to note that your iPad’s screen is an often overlooked source of microbes. Is your iPad screen covered in germs? Probably yes. This means that you should clean and disinfect your iPad but not compulsively.
You may want to disinfect your iPad’s display especially if multiple people are using it. According to Apple, you can use a 70 percent isopropyl alcohol wipe or Clorox Disinfecting Wipes to clean your screen.
Gently wipe your screen.
As stated above, do not use bleach.
If you are using a disinfectant (containing 70% isopropyl alcohol), do not apply these liquids directly to your iPad. Instead, moisten a soft cloth or a microfiber cloth until it’s damp. Then wipe your iPad.
Don’t use Dettol wipes.
Never use bleach, harsh chemicals or cleaning solvents, ammonia, or abrasives on your iPad. Never spray cleaners directly onto the screen.
Another important point is that you should use a microfiber cloth as it has the ability to collect bacteria and it can remove microorganisms.
Furthermore, you may want to change your iPad usage habits. For example:
Wash your hand before using your iPad.
Stop taking it into the bathroom yes we know you are doing this.
Do not share your iPad with others.
Here is what you can do if you get your iPhone wet.
See also: iPhone Screen Not Rotating? Fix
WePC is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more
Last Updated: December 21st, 2023
For that reason, we’ll be looking at some of the best and quickest ways you can keep your peripherals clean during this extremely testing time. And let’s be honest, we could probably all do with brushing up on our desk cleanliness.
Let’s waste no further time and slap on the rubber gloves – wait, what?
To get a better idea of how dirty your peripherals can actually be, we’ve found some fairly eye-opening stats that might make you think twice about using your keyboard and mouse without cleaning them.
A person’s keyboard and mouse can harbor up to 20,000 times the amount of germs found on your toilet seat
Around 80% of infections are spread via the physical contact of surfaces and NOT coughing and sneezing
2 out of 3 users eat at their work desks
Microbes such as the common cold can live on surfaces for days – with chúng tôi surviving for well over a year
32% of all people admit to not washing their hands after using the restroom
These are the kind of disturbing facts you can find by just scratching the surface. Ultimately, PC peripherals are some of the most disgustingly unclean items you can come across. Whilst many of the germs on your keyboard won’t be of any real harm, its still the perfect breeding ground for more harmful microbes.
There are a ton of different ways you can clean your keyboard and mouse. However, to properly cleanse your peripherals, we recommend using tools more equipped for the job.
We’re going to go over them shortly – but for now, here are some helpful tips on keeping your work/office space clean and hygienic.
Clean your keyboard and mouse at least once every couple of days with antibacterial wipes
Always remember to clean your desk – throw away clutter, leave no food around your work area, and hoover any crumbs that may have accumulated in and around the keyboard
Try not to eat at your desk – this is one of the easiest ways you can make a mess of your work/office area
Below are some of the best cleaning tools on the market for computer peripherals. They not only make the job much easier, but they’re also much more efficient too.
METROVAC Computer/Electronics Duster
One of the best tools you can purchase to ensure your peripherals are always clean is a computer duster. For all intents and purposes, this powerful little blower will make sure all annoying dirt particles are removed. Removing hair and other stubborn particles can sometimes be extremely problematic – not anymore though.
The MetroVAC also comes with a static wrist band that allows you to clean the interior of your PC case with no fears of static electricity occurring.
MiracleWipes for Electronics Cleaning
Once you’ve cleaned your keyboard of all dirt, keeping on top of everyday hygiene becomes a whole lot easier. Using one of the MiracleWipes allows you to eliminate most of the bacteria on your keyboard.
These handy wipes are also anti-static and surface safe to use – meaning you’ll be able to use them on your keyboard, mouse, touchpad, and screen. They leave no streaks on screens and have a quick-dry formula which means they won’t be slowing you down any time soon.
MiracleSpray for Electronics Cleaning
If you’d rather go down the microfibre route, fear not, the same company offers up a Miracle spray which is fantastic for keeping all peripherals clean. It even comes with its own microfibre cleaning cloth which is great for a streak-free, fast-drying finish.
Out of the two products, this one probably showcases the better value for money – especially if you factor in the microfibre cloth. However, both are very efficient cleaning solutions.
YOUZAN Foam Tip Cleaning Swabs
Cleaning swabs are a fantastic way to get into all the tight areas of any keyboard and mouse. Whilst the above methods should get rid of most of the germs residing on your keyboard, they don’t offer a deep clean of the more tricky areas on your peripherals.
Cleaning Gel Universal Dust Cleaner
For users on a strict budget, the cleaning gel universal dust cleaner is a great way to remove dust and particles that have slipped between the keys of your keyboard. In terms of versatility, this is one of the least versatile in this list, but what do you expect for five bucks?
This reusable dust cleaner molds itself into all the hard to reach areas and sticks to dust like you wouldn’t believe. This probably isn’t the best option for long term users – there are so fairly questionable reviews – but for a quick fix, it’s definitely worth considering.
So, there you have it guys, our quick rundown on some of the best cleaning tools to help keep yourself well on top of hygiene during these testing times. By using the above recommendations, you will literally be protecting yourself from harmful germs that could affect you dramatically.
Let’s take a look at one of the easiest ways to clean up and optimize your WordPress database.
1. Although there are quite a few plugins available for this, we’re going to use the WP Clean Up plugin. From your blog dashboard, go to “Add New Plugin” and search for WP Clean Up.
2. After you’ve installed and activated the plugin, you’ll find it’s settings under your Settings menu.
4. Go through each one and delete the items that you want to get rid of. Alternately, you can just use the “Delete All” button.
6. Once completed, if there was any optimization that could be done then you’ll know from the total KB number – it will be smaller.
You’ve just cleaned and optimized your WordPress database. Wasn’t that easy?
Charnita has been a Freelance Writer & Professional Blogger since 2008. As an early adopter she loves trying out new apps and services. As a Windows, Mac, Linux and iOS user, she has a great love for bleeding edge technology. You can connect with her on Facebook, Twitter, Google+, and LinkedIn.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
If you have a habit of accidentally pressing the power button on your computer and triggering a full shutdown. This article will show you how to change what the power button does when you press i. Make it: Do nothing, Sleep, Hibernate, Shut down or Turn off the display. The choice is yours!
Related: How to fix Windows update KB5000842 killing game performance.
Whether you a hardcore gamer, stock or crypto trader, graphic designer, hacker, etc, the physical power button on your computer probably the most important button you press in your day to day life. Give or take a few extreme circumstances. What a lot of people don’t know, however, is that the power button on devices running Windows 10 can be changed to do more than simply turning your PC on or off.
At some stage, we’ve all accidentally pressed the power button on our Windows 10 PC and had it completely shut itself down at the worst possible time…I just recently had this happen between save points in Final Fantasy and cost myself a solid hour of character level grinding… All is not lost though, it has inspired me to put this guide together to help others avoid this accidental mishap!
How do you change what the power button does on Windows 10 computers?
Before we get much further into this guide, it’s important to mention that these changes will only affect what the power button does when your computer is turned on. When your computer is powered off, the power button will always turn it back on. These changes will allow you to change what the power button does once your computer has booted into Windows. For example, you can set it so the power button does nothing when pressed, restarts your system when pressed or puts your computer to Sleep when pressed.
Don’t forget to make the changes for On battery and Plugged in as the buttons will do completely different things depending on how you are using your device.
Note: This screen will look a little different on desktop computers, however, everything works the same.
If you just want your computer to turn on using the power button then do nothing until you shut it down in Windows, set it to Do nothing. This will prevent any accidental power downs but still allow you to hold down the power button to force shut down your PC should it become unresponsive and freeze up at any stage.
Can you also change what happens when you close the lid on your laptop?
From this screen, you can also change what happens when you close the lid on your laptop. Set it to Sleep, Do nothing, Hibernate or shutdown. For obvious reasons turn of the display isn’t listed… Anyway, that wraps up this guide, I hope you’ve found it helpful and I hope you can use it to prevent yourself from making the same mistake I did! We all know how boring level grinding can be.
Traveling with connected devices could open you up to data breaches or cyberattacks.
It’s important to take protective steps before traveling with your devices.
Failure to take the proper cybersecurity measures when traveling could put your entire business at risk.
This article is for business owners and professionals who plan to travel with connected devices like laptops, smartphones or tablets.
In the office or at home, you may be protected from online threats thanks to a robust cybersecurity solution for your internal network. But what about when you’re on a trip? You won’t be protected by your office’s network security, and must depend on hotel and conference center Wi-Fi, which aren’t always safe. Using your mobile devices on the go increases your risk of being exposed to online threats – hackers are always looking for opportunities to infect mobile devices and use them to gain access to the greater network.
When on a business trip and constantly using your mobile device for work, you need to be wary that you’re more at risk of attack. There are certain best practices that all employees should follow when traveling with your work devices.
Editor’s note: Looking for the right mobile device management solution for your business? Fill out the below questionnaire to have our vendor partners contact you about your needs.How to configure your devices for travel
These are some cybersecurity musts when traveling with your connected devices.1. Password-lock your devices.
Always make sure your devices are locked and password-protected. Should your device be lost or stolen, your first line of defense is a strong password. Even simple storage devices like your USB thumb drive should have a password.2. Enable 2FA or MFA.
If possible, enable two-factor or multifactor authentication on your devices. On top of a password, use a credential system that requires you to insert an unlocking USB device or a biometric lock, assuming that’s a feature on the device.3. Encrypt your data.
If you’re traveling with sensitive data on your laptop, it’s best to fully encrypt your device with disk encryption software. This locks your data behind more authentication factors and encrypts it, so if it falls into the wrong hands, they can’t strong-arm their way through to the disk. The data is scrambled and impossible to decipher without the password.
Ideally, you shouldn’t store sensitive data on your device. Instead, access it through the cloud over an encrypted connection such as a cloud access security broker (CASB).
“Don’t store sensitive work data on a mobile device, period,” said Mendy Newman, vice president of cybersecurity product management for Ericom Software. “Mobile devices can easily fall into the wrong hands, where they are subject to tampering by sophisticated cybercriminals who are only too happy to sell that data to the highest bidder. Instead, data should remain securely within the corporate data center and accessed remotely over an encrypted connection that protects the session from prying eyes, even when using public Wi-Fi.”4. Turn off Wi-Fi and Bluetooth auto-connect.
A feature on many laptops and mobile phones is an auto-connect option for Wi-Fi and Bluetooth connections. Make sure this is off, as you don’t want to auto-connect to just any Wi-Fi connection you pass. Most public Wi-Fi connections are unsecured, and some can be set up for malicious purposes to gain access or download malware to your device.
Before traveling, back up your sensitive or critical information on an external device or to the cloud, and make sure you have the latest version of all of your software applications.
Update the detailed information about How To Clean The Inside Of Your Computer on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!