You are reading the article Google Does Not Use Pogo updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Google Does Not Use Pogo
Google’s John Mueller has revealed that a user behavior known as pogo-sticking is not a signal when it comes to ranking search results.
“Pogo-sticking” is a nickname given to the act of quickly navigating back and forth between pages in search results.
Site owners may be concerned that it’s considered a negative ranking signal when users quickly back out from a page shortly after landing on it.
Mueller confirmed that’s not the case. In fact, pogo-sticking is not something worth worrying about at all.
This topic came out during a recent Google Webmaster Central hangout, where a user asked the following question:
Contrary to what this particular site owner believes, Mueller responded by saying Google doesn’t use signals like that when it comes to search.
There are a number of reasons why users might go back and forth between pages in search results, which would make it difficult for Google to turn that behavior into a ranking factor.
In short — Mueller says it’s not something worth focusing on as a site owner.
The full question, along with Mueller’s response, can be seen in the video below starting at the 51:18 mark.
“We try not to use signals like that when it comes to search. So that’s something where there are lots of reasons why users might go back and forth, or look at different things in the search results, or stay just briefly on a page and move back again. I think that’s really hard to refine and say “well, we could turn this into a ranking factor.”
So I would not worry about things like that. When we look at our algorithms overall, when we review which algorithm changes that we want to launch, we do look into how users react to these changes. But that’s something we look at across millions of different queries, and millions of different pages, and kind of see in general is this algorithm going the right way or is this algorithm going in the right way.
But for individual pages I don’t think that’s something worth focusing on at all.”
You're reading Google Does Not Use Pogo
Google Does Not Give Special Treatment To Content In A Blockquote
Google’s John Mueller recently addressed the use of the blockquote element, saying it’s not treated in any special way.
Mueller responded to a thread on Reddit from a user asking if putting content in a blockquote would prevent it from being seen as duplicate.
In short, the answer is no. Google will crawl the content just as it would anything else.
When Google sees a blockquote it will not disregard the content while assuming it’s from another source.
That’s a good thing because maybe the author went out of their way to gather original quotes for an article. So it wouldn’t be fair to disregard all content in blockquotes.
However, it will do a site no favors if a significant amount of content in a blockquote does come from another source.
Here’s what Mueller has to say about it:
“Google doesn’t treat “blockquote” or any of the other elements in a special way when it comes to quoting other pages. The important part is really just to make sure that whatever you’re publishing has unique value of its own. If it’s just a rehash of someone else’s content (quoting it) with no added value, then that doesn’t really leave a good impression, neither to Google, nor to users.”
As Mueller says, Google doesn’t like duplicate content, but it’s not outright penalized either.
That applies to duplicating entire pages or just grabbing parts of a page.
Duplicate content is devalued by Google, which is different from being penalized.
If a piece of content does not provide enough unique value then Google will rank it accordingly. Which is to say, it won’t be ranked very high.
Google will give more weight to where the quoted content first appeared, and less weight to where it has been republished.
You can easily reduce the risk of having your content devalued by having something to offer in addition to the quotes you’re providing.
It’s important to balance out quoted content with your own original insight. Give something of value to readers that they wouldn’t get out of reading the quotes on their own.
For example, you could quote a statement made on another website and provide a counter-argument. Or you could use quotes to support a point you’re trying to make in an article.
Bottom line – using a blockquote is perfectly fine, as long as it’s done tactfully.
How To Use Google Tez
Google recently announced Tez, a new digital payment app designed specifically for Indian users. With Tez, Google has stepped into the ever growing digital payment market in India. It is Google’s first payment app for India and interestingly they have chosen a name that strikes a chord with every Indian. Tez, in Indian language means ‘fast’. Google Tez can be considered as the subversion of Google’s highly popular Android Pay, which, unfortunately, is not available in India yet.
India is an emerging market for digital payments where millions of people are using and will use smartphones for the first time in future. Capturing this tremendous wave of people and getting them to use digital payment for the first time is in its own self a challenging task. While PayTM, Freecharge, MobiKwik, and PhonePe currently rule the digital payment market in India, it would be interesting to see how this new product from Google survives in India.
‘Google Play Store refund policy: Everything you need to know’
That said, let’s go deep into the world of Google Tez app.
What is Google Tez?
Google Tez is a standalone payment app launched by Google in India. Tez app uses UPI (Unified Payments Interface), a payment protocol launched by National Payments Corporation of India that allows instant transfer of money from one bank account to another on a mobile platform.
Let’s understand UPI first. Built over Immediate Payment Service (IMPS), UPI increases inter-operability amongst various banks. Thanks to UPI, transferring funds between multiple banks has become a piece of cake.
The UPI transaction can be initiated from any bank’s UPI app using a single identifier known as virtual payments address (VPA) or UPI ID. To initiate a UPI transaction, all a sender needs to know is the receivers UPI ID or VPA, which is user-generated and hence easy to remember. In most of the cases, the UPI ID is [email protected] And as such, there is no need to know receivers account number, IFS code, and other details. Further, UPI doesn’t require any pre-addition or approval of Beneficiary as we see in traditional NEFT transactions. Finally, the transaction is carried out using a MPIN (Mobile Banking Personal Identification Number).
Check out: Best Android O features
Built over UPI, Google Tez app uses all the benefits of UPI protocol and adds its own additional features and security measures. Google Tez allows you to send money to friends, pay online with Tez, receive payments directly to your bank account, and pay to nearby businesses all through one app and with much simplicity.
Google Tez is a simple and secure way to pay money. It is a natural, intuitive and fun way to transfer money. Talking about the intuitive nature, the Tez app doesn’t look like a payment app at all. The design seems a combination of chat apps like Facebook Messenger and media sharing app like Shareit. This is a cool thing since most of the smartphone users in India are familiar with both the apps. Brownie points to Google for this.
Some cool features of the Google Tez app are:
Made for India: It is specifically designed for Indian users. Since it is very simple and user-friendly, anyone can use the app.
Direct from bank: The transaction take place directly from bank to bank. You don’t need to transfer money to wallet first. Money stays in your bank all the time, which means you keep on earning interest on your money.
Simple as cash: Thanks to the new “Cash Mode” (more details below), the transactions using cash mode seem similar to the usual cash transactions. No need to share any personal details like an account number or phone number. All you need is to be in close proximity to each other like you are in any other cash transaction.
Multiple langauges: Google Tez is available in 7 Indian languages viz. Hindi, Bengali, Gujarati, Kannada, Marathi, Tamil, and Telugu.
Free for users: There is no additional charge for users when making payments through Tez app.
Currently, Tez app doesn’t support transaction through debit and credit cards, however, as per the Google Play description, it is the topmost upcoming feature. In future, you will also be able to pay utility bills directly from Tez app.
Check out: Android Oreo 8.0 update: When will my device get it
How Google Tez app works
As mentioned above, Google Tez has its own additional features on top of UPI payment. Google Tez allows you to transfer money using following 5 modes:
UPI transfer
Phone number
Account number
QR code
Cash mode
UPI transfer
UPI transfer on Google Tez app like all other UPI transactions requires UPI ID. When you set up your Google Tez account, you will be asked to add your UPI ID. If you don’t have one already, a new one will be generated automatically that looks like [email protected] To send money, you need receivers UPI ID too.
Check out: Gmail tricks you should know about
Phone number
Google Tez app integrates with your phone number. If your friends use Google Tez app, you can send money by just entering their phone number. The only requirement is that the receiver should have the Tez app installed. You cannot send money to a person who isn’t on Google Tez app using just phone number. Interestingly, Google Tez app lists the contacts that are using Tez in a nice round bubble interface, which makes the entire payment process very easy, since now you just need to tap the phone number from the list.
Account number
Similar to transactions using account number on other portals, Google Tez app would ask for your account number, IFSC code, and similar other details.
QR code
You can also pay for purchases and services by scanning a business’ QR code. Similar kind of feature is available on other payment apps such as PayTM and Freecharge. However, in Google Tez app, you can use QR code for user payments too.
Check out: Cool hidden features of your Android device
Cash Mode
The most interesting and unique feature of the new Google Tez app happens to be the ‘Cash Mode’. Cash mode lets you pay and receive money from people near you. If you are familiar with media sharing apps like Shareit, Sharelink, and others, Cash Mode is somewhat similar to that. Even the interface reminds us of Shareit. But, instead of media, you now share money with nearby users.
Cash mode allows payments with nearby users by connecting devices using Audio QR based on ultrasound. It connects devices using microphone and speaker, which is present in almost all smartphones in India. Hence, you don’t need to buy any special smartphone to use Google Tez app. It is compatible with all Android phone running Android 4.4+ operating system.
Both users will need to have the Tez app installed on their device. They can then transfer and receive money without sharing any personal details like phone number or bank account – nothing. All they need to do is tap the “Cash Mode” button on the home page of the Google Tez app and select the nearby receiver. That’s it.
How To Setup Google Tez App
To setup Google Tez on your Android device, you’ll need a Google account, an active Indian (+91) phone number, and an active Indian bank account. Follow the steps below to use Google Tez app:
Install Google Tez app from the Google Play Store.
Login with your Google account and then link your phone number.
You will be asked to set up a Google Pin or lock screen.
Once inside the app, tap “Add Bank account” present at the top. Select your bank. Your phone will send an SMS from the registered phone number. Add your UPI ID, and in case you don’t have one Google Tez app will automatically create your UPI ID.
Check out: High battery usage by Android? Here’s how to fix it.
How to pay with UPI ID on Google Tez
Open Google Tez app.
Tap “Pay using phone or account number or UPI ID” button.
Tap the second option “UPI ID, QR, Phone” and from the menu select “UPI ID”.
Enter UPI ID and tap Verify.
Finally, enter the amount that you want to transfer and enter your UPI PIN.
How to pay with phone number on Google Tez
Open Google Tez app.
Tap “Pay using phone or account number or UPI ID” button.
Tap the second option “UPI ID, QR, Phone” and from the menu select “Tez user phone number”. You can also just tap the name of the person from the list of Tez users.
Enter the phone number and tap Verify.
Finally, enter the amount that you want to transfer.
Check out: How to wirelessly sync files between PC and Android on a local network without internet
How to pay using Bank account number on Google Tez
Open Google Tez app.
Tap “Pay using phone or account number or UPI ID” button.
Tap the first option “Account number”. Enter recipient account details and tap proceed.
Finally, enter the amount that you want to transfer.
How to pay using QR code on Google Tez
Open Google Tez app.
Tap “Pay using phone or account number or UPI ID” button.
Tap the second option “UPI ID, QR, Phone” and from the menu select “Scan QR code”. Scan the QR code of the person to whom you want to transfer money.
Finally, enter the amount that you want to transfer.
Alternatively, on the home page of Google Tez app, tap the three dots present at the top right corner and select Scan QR code to scan the code. If you want to show someone your code, select Display QR code from the menu.
Check out: How to allow call ringtone while keeping notifications on silent
How to use Cash mode on Google Tez
Open Google Tez app.
Select “Tap for Cash Mode”.
If you want to send money, slide the slider upwards to Pay and if you want to receive money slide the slider downwards to Receive.
The app will then look for nearby Tez users. Tap the right person to whom you want to send money. Enter UPI Pin and you are done.
Security
Backed by Google’s multiple layers of security, Google Tez also allows the usage of a screen lock or a Google PIN to use the app. Further, each transaction is secured with your UPI PIN. So, in simple words, two PIN numbers and Google’s under the hood security measures protect each transaction.
Number of transactions
Similar to other UPI-based apps, Tez lets you transfer up to Rs. 1,00,000 and make 20 transactions per day. Once you reach the above numbers, you will have to wait until the next day to send more money.
As a launch offer, Google is offering referral rewards such as if a person installs Google Tez from your referral link, both of you will get Rs 51 in your accounts when the second person makes the first transaction on Google Tez.
What Does “User Not Found” Mean On Instagram?
Did you recently viewed someone’s profile and got the “User not found error” on Instagram?
Maybe you’ve direct messaged someone recently but when you visit their profile, you get the error message.
Or maybe you searched for someone on Instagram but their user is not found.
Either way, there are multiple causes for the error, and it doesn’t always mean that you’re blocked.
In this article, you’ll learn 5 different reasons why you got the “User not found error” on Instagram.
By the end of the article, you should have a clear understanding of why you saw the error.
Table of Contents What Does “User not found” Mean on Instagram?The “User Not Found” error on Instagram either means that the user has changed their username, blocked you, deleted their account, their account is suspended, or their account is disabled.
If the user blocked you, the “User Not Found” error will show up when you try to visit their profile.
Similarly, if a user changed their username, deleted their account, or if their account is suspended/disabled, their profile will no longer exist on Instagram.
Below are the 5 reasons why you got the error message on Instagram.
1. Username has changedThe first reason why Instagram says “User not found” is because the user has changed their username.
When someone changes their username, you will be unable to find them using their old username.
Visiting someone’s profile using their previous handle may result in the “User not found” error.
This is because their old username is no longer in use.
So, you need to search for the person’s new username if you want to find them on Instagram.
If you search for their old username, you’ll not be able to find them on Instagram.
But if you happen to find them on the search results using their old username, visiting their profile may result to a “User not found” error.
In order to find the person on Instagram again, you may need to get in touch with them.
Ask them for their new username, and search it on Instagram.
Once you do, you should be able to visit their profile without receiving the error message.
2. You’re blockedNext, if you receive the “User not found” error when you’re visiting someone’s profile, there’s a high chance that you’re blocked.
This is one of the most common reasons why you received the error.
The most common reason for the “User not found” error on Instagram is because the person has blocked you.
If someone blocks you on Instagram, you will receive the “User not found” error if you’re still able to visit their profile.
When someone blocks you on Instagram, you won’t be able to find them on Instagram.
This means that if you search for their username, their profile won’t show up on the search results.
However, this is an exception if you have direct messaged them before, or if their profile is in your recents.
For example, if the person just blocked you while you’re direct messaging them, their profile is still visible from your direct messages.
But when you visit their profile from your direct messages, you’ll receive the “User not found” error.
Additionally, if their profile is in your recent search results, you’ll still be able to visit their profile.
Similar to visiting their profile from your direct messages, visiting their profile from your recents will result in the “User not found” error as well.
All in all, there’s a high chance that the person has blocked you if you got the “User not found” error when you visit their profile.
3. Account is deletedThirdly, the account might be deleted by the user.
Whenever someone deletes their account, their profile will be gone, along with all of their posts.
When you visit the profile of someone who recently deleted their account, you’ll see a “User not found” error.
This means that their username no longer exists on Instagram.
So, if you were to visit their profile, you will receive the “User not found” error if they deleted their account.
If an account is deleted, it can no longer be found on Instagram.
However, if you happened to have direct messaged them before, or you have their profile in your recents, you’ll still be able to visit their profile.
But if you do visit their profile, it’ll show the “User not found” error.
4. Account is suspendedFourthly, the account that you’re searching for might be suspended/disabled.
In other words, the account is permanently banned by Instagram.
When an account is suspended, their profile will no longer exist on Instagram.
When an account is suspended, its profile will no longer exist on Instagram.
The most common reason why an account is suspended by Instagram is that they have violated one or more of Instagram’s guidelines.
Instagram gives little to no warning to accounts that violates their guidelines or terms of use.
If an account gets multiple reports for violating Instagram guidelines, or the AI detects it, the account will be suspended.
If that’s the case, visiting someone’s profile that was recently suspended will show the “User not found” error.
5. Disabled accountThe final reason why you got the “User not found” error when visiting a profile is that the person has disabled their Instagram account.
Disabling an account is temporary; unlike deleting it.
If someone disabled their account, their account will be hidden from Instagram until they re-enabled it.
When someone disabled their account, their profile along with their interaction with posts will be hidden.
This means that their profile will be hidden from Instagram until they re-activate it.
So, when you visit someone’s profile that just got disabled, you will see the “User not found” error.
How can you tell if you have been blocked on Instagram?If you have been blocked on Instagram, you will not be able to search for their profile.
However, you can still visit their profile if you’ve direct messaged them before or if they’re in your recents.
If you’ve direct messaged them before, you can still visit their profile from your direct message list.
But you’ll receive the “User not found” if you are blocked by them.
In addition, you can still visit their profile if they happen to be in your recents (in Instagram search).
Similarly, you’ll receive the error if you are blocked.
Why can’t I find an Instagram user?You can’t find an Instagram user because they might have blocked you.
To confirm that you’re blocked on Instagram, you can utilize an alternate account.
Firstly, go to your main account and search for their username.
If you’re blocked, their account will be hidden from you.
Then, use an alternate account to find the person’s profile.
If you’re able to find it, then your main account is blocked.
Why can’t I find someone on Instagram if I’m not blocked?If you’re not blocked, you can’t find someone on Instagram because of 4 reasons.
The user might have either changed their username or deleted their account.
Otherwise, their account might have been suspended or disabled.
ConclusionThe “User not found” error is quite common on Instagram.
In this article, you’ve learned 5 different reasons why you got the error.
To summarize, here are the reasons:
The user has changed their username.
You’ve been blocked.
Their account is deleted.
Their account is suspended by Instagram.
The user has disabled their account.
Don’t jump into conclusions and verify the correct reason with the person first.
Further ReadingHow to Introduce Your Business on Instagram: A Step-by-Step Guide
Why Am I Getting no Likes From Hashtags on Instagram?
Your Post Goes Against Our Community Guidelines Instagram (How to Fix)
Author: Lim How Wei is the founder of Followchain. Feel free to follow him on Instagram.
How To Use Google Disavow Links Tools?
Internet has both good and bad stuff. You can spend lot of time and publish a quality article on your site. However, a bad backlink to that article will impact the ranking in Google and other search engines. Whenever you found bad links to your site, Disavow links is the final option to inform Google to ignore the the spammy backlinks pointing to their sites. You can use this tool as part of regular site cleanup activity. Here is a step by step explanation of how to use Google disavow links tool for protecting your site from bad inbound links. Learn more on how to disavow links in Bing Webmaster Tools account?
Why Bad Links Pointing to Your Site?There are many reasons how a bad link can point to your site’s page.
You might have created links in forums and blogs when you started your website.
You hired a SEO agency who created a paid backlinks from shaddy websites.
Competitors can purposely create unnatural links pointing your site to lower the search ranking.
Whatsoever is the reason, it is a good idea to get rid of bad links.
Where Can I See My Bad Links? Before Using Google Disavow Links ToolIf you have manual action, it is necessary to cleanup the links before you use disavow tools.
First, do the analysis of the links and prepare the details of websites having your links.
Contact the site owners to remove the link by using the contact form on their site.
If you know the email address, send the webmaster about the situation and request for removing the links pointing to your site.
After your attempts, make the final list of sites that still contains bad link.
Note: For manual action case, you need to submit a reconsideration request after your effort in removing the bad links. Learn more about how to submit a reconsideration request.
If you did not receive any manual action and wanted to disavow the links, simply prepare the disavow file for submission. For example, we have contacted the above pornography site owner with screenshot to remove the link. As there was no response, we have no other option disavowing the domain.
Remove Link to Website
You can find pornography, gambling, casino or any other illegal sites pointing to your website and disavow them to protect your site.
How to Submit Disavow Links to Google?Disavow links option is not available inside Search Console account. However, you need to login to your Search Console account before using the tool using an external link.
Step1
– Download Inbound Links Details
The first step is to download all the bad inbound links pointing to your site.
Login to your Search Console account and go to “Top linking sites” under “Links” section.
You can get the file as CSV, Excel or Google Sheet format
Export Links
Step 2 – Creating chúng tôi FileFrom the list of links downloaded in the Step1, create your own chúng tôi file (you can use any name for the file). Normally when you save a text file in a Notepad it will be saved in ANSI format which is not accepted by Google. Hence, ensure to select UTF-8 format when saving your text file if you use Notepad. The option of selecting UTF-8 when saving your Notepad text file is shown in the below picture:
Saving file in UTF-8 format
Similarly, TextEdit on Mac by default uses rich text format when saving files. Go to “Format” menu in TextEdit app and select “Make Plain Text” option. When saving the file, make sure to check the format is in UTF-8.
Make Plain Text in Mac
You have two options to provide the link details in the file:
Alternatively, enter link by link instead of using the complete domain. Ensure, you use one link per line.
# Remove these Links from spam-site Step 3 – Uploading chúng tôi FileThe final step is to upload the chúng tôi file you created in the Step2.
Login to your Search Console account.
Choose Website Property
Google will display a warning message regarding the potential danger of using the tool. It is important that you use this tool only when you are not able to remove the spammy backlinks in order to raise a reconsideration request and very sure that the links you mentioned in the file are causing a problem for your site ranking. It is not necessary to use this tool if no manual penalty is set on your site by Google or you do not find any suspicious links.
Upload Disavow File
Select the chúng tôi file you created in the Step2 and submit your file to Google. Earlier, you need to wait for few weeks time for recrawling. Now you don’t see to wait and will see the details instantly after successfully uploading the file. Google will send you an email about the disavow list details.
Confirmation From Google
Step 4: Cancel or Modify the Uploaded FileThere could be situations that you have wrongly submitted the file or want to modify the list.
Anytime, go to the Disavow tool and select your website property.
You will see the current status of the submission like how many domains and links are disavowed.
You can also download the previously submitted file for reference.
Cancel or Replace Disavow List
SummaryHere is a summary of what you should do and what you should not with disavow link tool:
Do
Ensure to download links from both WWW and Non-WWW versions of your site to get the complete list of backlinks pointing to your site since these two sites are considered as two different sites by Google.
Upload only text file and ensure to select UTF-8 encoding format when saving the file.
Use only links entered per line in the file.
Add additional information using # in the start of each line.
Don’t
Don’t add any additional links not available in the downloaded link file.
Avoid using Notepad file encoded in ANSI format. If you are using Mac, make sure to create plain text file instead of RTF with TextEdit.
Don’t upload document or excel file.
Avoid adding information in the file without #.
Avoid using complete domain in the file.
What Does “Plugged In, Not Charging” Mean With Laptop Batteries?
You’re using your laptop when you notice something strange in the taskbar; you could have sworn you charged your battery to 100%, but now the battery is showing slight depletion. When you hover over the icon, it tells you that the battery is “plugged in, not charging.”
This can be a somewhat distressing message to hear. Does it mean the battery is on its way out? While Windows doesn’t really tell you what’s going on, this message doesn’t always mean your battery is on its last legs; in fact, in some cases, it’s being prepped to live longer than it normally would! So what does this message mean? Here are a few reasons why you might be seeing this message.
1. Battery Preservation Software Is Saving the BatteryIf you notice that this message appears when you’re in the 90-100% charge range, you may be seeing battery preservation in effect. Some laptop models will automatically stop charging the battery when it hits 100%, especially if you’ve been charging it for a long time. By keeping it a little under 100% charge, laptop manufacturers claim this helps with extending the battery’s life.
This may also come into effect at lower percentages. For example, my Lenovo laptop typically stops charging above 95%, but there’s an option within the Lenovo settings to keep it around 50 – 60% for better battery preservation. It’s worth looking at your laptop’s settings to see if your manufacturer has a setting similar to this.
2. The Battery Needs RecalibrationReporting your battery levels is a two-way effort between your battery and Windows itself. If the two of them get their statistics mismatched, Windows may report a battery is only partially full, when the battery is actually fully topped up and has no room for any more charge. In order to sync Windows and the battery back up, try recalibrating your laptop battery to put them both on the same page.
3. Something’s Wrong with the AC AdapterThis message may be due to the laptop recognising that your AC adapter is present but not efficiently delivering a charge to your laptop. If you can, try to jostle any connections in your AC adapter to see if anything changes; this includes the connection between it and the laptop, it and the power socket, and any places in between where something plugs into something else. It’s also worth trying a new A/C adapter if you can easily acquire one.
4. Something’s Wrong with the Battery DriversYes, even your battery has drivers! Sometimes these need a re-install to get back into working shape once more. Before you try re-installing your battery, it’s worth noting that part of these steps involve removing the battery from the laptop. If you don’t know how to, or physically can’t, remove the laptop’s battery, it’s best to consult a professional to prevent damage.
Also, it’s best to see if you can download your battery’s drivers; it should do it automatically during these steps, but it’s best to be prepared in case something doesn’t go right!
Turn off the laptop and remove the battery, then hold down the power button for a minute to get rid of any residue charge. Replace the battery, turn the laptop back on, and the battery drivers should re-install themselves. Check if the batteries now charge properly.
5. Something’s Wrong with the Battery ItselfIt may be possible that the battery is beginning to get old and lose its charge. In this case, it might be best to give your battery a once-over to see how it is faring. We’ve written an article on how to check your laptop’s battery health in Windows 10, so give that a read to see how it is holding up. If it’s on its way out, try a new battery or take it to a service centre if you can’t get the battery out.
Taking ChargeWhen a battery doesn’t charge itself, it can be worrying to users who don’t know what it means. Now you know some of the reasons why a battery won’t charge itself and how to fix it — if it even needs fixing!
Does this help? Let us know below.
Image Credit: Laptop PC with battery
Simon Batt
Simon Batt is a Computer Science graduate with a passion for cybersecurity.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Update the detailed information about Google Does Not Use Pogo on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!