Trending December 2023 # Fix: Windows 10 Apps Not Opening # Suggested January 2024 # Top 18 Popular

You are reading the article Fix: Windows 10 Apps Not Opening updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Windows 10 Apps Not Opening

Fix: Windows 10 Apps not Opening [Full Guide] You can try changing the ownership of the C: drive




If the Windows 10 apps won’t open, you’re probably missing some updates.

One way of fixing

Windows 10 programs not opening

 is to start the Apps troubleshooter as shown below.

You can also solve this problem by using a third-party app as recommended our guide.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Apps are an important part of any OS, Windows 10 included. While they are fundamental to the overall experience, some users have reported that Windows 10 apps won’t open on their computers.

We were intrigued by the prospect of Windows 10 programs not opening and started digging around to see what could cause this abnormal behavior.

It turns out, there are numerous circumstances that can facilitate the appearance of this glitch, so let’s get straight to it.

Why are my Windows apps not opening?

So, what is usually the easiest way to fix an application which won’t start anymore? Don’t worry, we made sure to include all the steps and make things as easy as possible.

How do I fix apps not opening in Windows 10?

Sometimes, these types of problems can be fixed by performing a Windows Update, so make sure that you have the latest updates installed.

Open Settings App and go to Update & Security.

Go to the Windows Update section and download the latest updates.

2. Run the troubleshooter

If Windows 10 apps won’t open, you might want to run the Windows Store Apps troubleshooter. However, this procedure is now guaranteed to work and you will also lose some precious time in the process.

It’s a lot better to use qualified third-party tools such as Fortect. The process is entirely automatic and safe. Moreover, the results are a lot more consistent.

⇒ Get Fortect

3.1 Update the apps in Microsoft Store

If the Store app isn’t working, you can try the same steps from a different user account on your computer, or you can use the Command Prompt to force updates.

3.2 Force app updates using Command Prompt

The command will trigger performing automatic updates for Windows apps so give it a try right now.

If a specific app is not opening in Windows 10, you may need to reinstall it. To do that, follow the steps below.

4. Perform Store cache reset

If you can’t open the Store app, and there’s no way to update your apps, you might want to perform a cache reset by following the steps above.

In most cases, that should suffice. However, the issue can be bigger than that and you might need to perform some additional steps in case the Microsoft Store still does not work properly.

5. Make sure that Application Identity service is running 6. Change ownership of your C: drive

6.1. Change C: ownership

Sometimes Windows 10 apps won’t open due to ownership problems, but you can easily fix that. To change the ownership of a folder, or a hard drive partition, perform the steps from above.

6.2. Add Full Control permissions for ALL APPLICATION PACKAGES group

7. Change FilterAdministratorToken in Registry Editor 8. Use PowerShell

You can also try this command.

Start PowerShell as administrator.

Enter the following command and press Enter to run it: ren %windir%System32AppLockerPlugin*.* *.bak

Close PowerShell and restart your computer.

9. Move the Database folder from one profile to another

To complete this solution, we’ll need to create two new profiles and move the Database folder from one profile to your main profile.

Although this process might look a bit complex, just follow the steps above carefully and you should be able to complete it.

10. Create a new local account

If Windows 10 apps won’t open, you might have to create a new account and transfer all your personal files to it. This solution can prove just as effective for situations when Windows 10 default apps go missing.

Problems with Windows 10 apps that won’t open aren’t that common, but some programs are more likely to be affected than others:

WhatsApp for desktop

Slack app

Office 365 programs such as Microsoft Word and more

One more thing before we wrap it up – Microsft’s freshest OS is not exempt from this erratic (yet occasional) behavior. In case you’re already struggling, we prepared some equally comprehensive steps to help you out when Windows 11 apps won’t open.

Was this page helpful?


You're reading Fix: Windows 10 Apps Not Opening

Fix – Windows 10 Settings App Not Opening

Fix – Windows 10 Settings App Not Opening

What Are We Dealing With Here?

Below are the kind of problems faced when Windows 10 settings refuse to open or work properly –

Unresponsive Windows 10 Settings app

No matter what alternative you take you are just not able to open Settings (we suggest you create a new user account, for more information you can head to Way No. 6)

Even after the Settings opens, you cannot access the options.

Updates fail to take place.

Ways To Fix Windows 10 Settings App Not Opening

Below are some of the possible ways and means you will either be able to resolve the issue or you will at least have an alternative way to open the Settings app –

Way No. 1 – Reset Settings

This simple method aims at resetting all the settings which might be able to eliminate any issue because of which Windows 10 Settings app are not opening or not working.

3. When the new window opens scroll down till you reach the Reset button

In case, Windows 10 Settings app are still not opening, you can proceed with other methods.

Way No. 2 – Did You Disable The Settings App By Mistake?

Even if not, you can try the following steps and check if the Settings app in Windows is enabled. After you have enabled the Settings app, you should be able to access all the options and the Settings app itself –

3. Once the Registry Editor Window opens, follow the below-mentioned path –

HKEY_CURRENT_USERSoftwareMicrosoft WindowsCurrentVersionPoliciesExplorer

Note: In case you don’t find Explorer –

Way No. 3 – Run The SFC Command In Administrative Command Prompt

SFC command is a simple and yet effective way to deal with corrupt files which can be the root cause of many issues such as Windows 10 Settings app not working.

1. Press Windows + R to open the Run dialog box

2. Type CMD and press Ctrl + Shift + Enter to open the elevated Command Prompt

3. When the Command Prompt opens type SFC /SCANNOW and press Enter

4. Wait for the process to complete

Way No. 4 –  Re-Register Windows 10 Apps

You can try and re-register Windows 10 apps if you are unable to open the Settings app in Windows 10. For this, you will have to take the help of Windows PowerShell. Here we have simplified the steps for you –

1. In the Windows search bar type PowerShell

2. Choose Run as administrator from the right-hand side

4. When the PowerShell window opens type the following command

5. Press Enter

Way No. 5 – Open Settings Via Notifications Center

If your Windows 10 settings are not opening via one route, you can try an alternative way such as using the Notifications center that you can find at the bottom-right corner of the screen.

2. Select All Settings (represented by cog-icon)

3. You can now access settings

Way No. 6 – Go For A New User Account

In case you need the Settings app urgently and you find that Windows 10 Settings app are not opening, you can create a new user account and tweak settings from there. Here’s a comprehensive guide on how to create or delete a user account in Windows 10.

You can even create a user account using elevated Command Prompt –

1. In the Windows search bar type CMD

2. From the right-hand pane select Run as administrator

3. In the Command Prompt window type net user newusername (replace this with your desired username) newpassword (replace this with your desired password) /add and press Enter

4. Sign out of your existing account and log in to the newly created account

Wrapping Up Quick Reaction:

About the author

Sarang Bhargava

Jar File Not Opening On Windows? Here’s How To Fix It

JAR files, also called Java Archives files, are archives of Java class files. In a nutshell, JAR files are groups of files that can contain images, audio, visuals, etc., and can run as a single executable program when paired with the Java Runtime Environment.

They are predominantly used by Java developers for coding and programming. However, jar files refusing to open is one of the many issues that can happen while using them.

Here are the possible causes for your jar file refusing to open.

JAR file set to open with other applications.

Java Runtime Environment having issues.

Incompatible JRE or JDK version

Incorrect Filename Extension

There are several methods you can use to fix JAR files not opening. However, before you begin, ensure the JAR file has the correct filename extension. To do so, go to the View tab and enable File name extensions. Make sure the JAR file has .jar at the end.

Make your way down the list of fixes to see which one works for you. 

For the JAR files to be opened as a standalone program, you need to have the JAVA Runtime Environment. However, if the JRE is not set as the default application for opening jar files, your computer tries using different applications to open the file and fails to do so.

So, you should set the JRE as the default application for opening JAR files.

You can also enter assoc .jar=jarfile and ftype jarfile="C:(path to your javaw.exe)" -jar "%1" %* command in an Elevated Command Prompt to set JRE as the default application.

However, you need to make sure of the following things.

Enter the commands in the same order.

Ensure to input the directory path to your JRE in the second command.

Make sure the path is set to your JRE instead of JDK.

You can also easily open jar files using command lines in the Command Prompt.

Here’s how you can do it:

If your jar file is non-executable, the above method won’t work on opening it. You would need to use a different command.

Another method you can use to open .jar files is by creating a .bat file scripted to open a particular file. This method skips the normal method of opening the .jar file and helps resolves issues like this.

Follow the steps below:

For non-executable .jar files, you can use the same command as above to create a .bat file that opens it.

If you have multiple Java versions and are trying to open a jar file made in a different version of Java from the one you are using to open it, the jar file may not open. While Java is supposed to be backward compatible, you may still face this issue sometimes.

To solve this, you must define a compatible version with which the jar file should open.

Here’s how you can do it:

You can also use this method in the Command prompt or create a bat file to open jar files.

The jar files can not start as a standalone program without JRE, so JRE must be working properly to open jar files.

If there are any errors in JAVA Runtime Environment, you can reinstall a clean new copy to nullify any issues plaguing it.

Follow the steps below to reinstall it:

Jarfix is a legit software that many Java developers use to troubleshoot issues with jar files. So, you can run Jarfix to fix issues with your jar files, including issues like jar files refusing to open.

It is a lightweight program and doesn’t use many system resources. However, be sure to download this program from a trusted website.

How To Fix Apps That Are Blurry In Windows 10?

The problem mainly arises while trying to run older applications, when you can see the blurry text on Windows apps. Here, I shall be discussing how to fix apps that are blurry using the built-in features in Windows 10.

We have shown a VIDEO walk through at the end of the post for easy solution.

Some of the apps you will be facing this error on include web browsers, where the issue is more hardware-based than software. Blurry text Windows 10 on Chrome, where many users reported this was a hardware bug and was caused due to incorrect DPI configuration.

Read: Fixing bad Chrome fonts

Changing the ClearType text status has been accepted widespread to solve this error on Windows 10. Check the article mentioned above if you see blurry text and fonts on Windows 10.

As mentioned above, although Windows 10 does a decent job of maintaining the output resolution, many developers have not yet upgraded the older applications for the newer and better high definition displays. With the Creators’ update, Microsoft introduced built-in support for display troubleshooting in case of blurry applications and texts.

Here are some of the solutions that you can try for troubleshooting the blurry apps and fonts on Windows 10.

The DPI scaling in Windows 10 has been a long-standing issue, especially on higher resolution monitors. Microsoft handled well and introduced built-in support for upscaling the applications. This is achieved using the troubleshooter that kicks in automatically when Windows detects blurry resolutions.

To enable this troubleshooter, follow these steps:

Open the Settings app and go to the System section.

Make sure the Display is selected from the left pane.

Advanced scaling settings

Let Windows try to fix apps so they’re not blurry

Restart your computer and check if the blurry apps error persists.

On many newer displays, you may find problems running legacy applications, which are not calibrated to the high DPI displays. Extension of the troubleshooter mentioned above exists under the Properties window of the application, which can be modified as follows:

Launch the app that you wish to upscale on your computer.

Select Properties from this menu that appears.

Switch to the Compatibility tab.

Change high DPI settings

Override high DPI scaling behavior

Select System (Enhanced) from the drop-down menu next to Scaling performed by

Restart the application to check for any visual quality improvements.

This is one of the best ways to check for improvements within individual applications, as the changed settings apply only to individual applications and are not implemented globally.

If the solutions provided above did not help you in solving blurry text on Windows 10, it is possible that the hardware is not being able to transmit the instructions correctly. This can be fixed by updating the instruction components to their latest versions, which are referred to as drivers.

Update the display drivers to the latest version, and check if the error persists. You should be able to easily fix apps that are blurry on Windows 10 if you saw this error due to outdated device drivers.

If none of the solutions provided above helped you in solving the blurry apps and texts on Windows 10, you can try a workaround to adjust the global resolution scale settings. Although not exactly a solution, you can use custom resolutions to fine-tune the resolution to perfectly match your display.

Follow these steps for the same:

Open the Settings app and go to the System section.

Make sure the Display is selected from the left pane.

Advanced scaling settings

Go to the Custom Scaling section, and enter a scaling value between the scaling sizes mentioned.

Mix and match until you find the perfect resolution that matches your display size.

So there you have it. Now you know the steps and solutions involved to fix apps that are blurry. Comment below if you found this useful in solving Windows 10 blurry apps, and to discuss further the same.

Fix: Startup Folder Not Working In Windows 10/11

FIX: Startup folder not working in Windows 10/11






To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

The most common problem with startup programs is that they tend to bloat your system and slow down the startup process.

The dozens of programs in combination with an old HDD mean that you’ll wait for some time until the PC finally boots.

However, there’s also the opposite of it – when programs in Windows Startup folder just won’t start no matter what you do.

For the sake of dealing with this annoyance, we prepared an in-depth list that should provide you with enough resources to address this problem.

In case you’re trying to make a program start with the system without success, make sure to take a look below.

What can I do when programs from Startup folder won’t start? 1: Check the Startup manager

Back in the days, you had to turn to System Configuration in order to tweak the startup programs. There were all Windows services, too, so there are a lot of things you couldn’t touch.

A tad overcomplicated for a standard user. Others turned to third-party tools that were more of a bloatware than the solution. Luckily, that’s not the case with Windows 10.

Now, you can navigate to good old Task Manager and find all startup programs you need.

You can enable or disable any of them based on your needs.

If you’re not sure how to use newly added Startup manager in Windows 10, follow the instructions below:

Press Ctrl + Shift + Esc to open Task Manager.

Open the Startup tab.

Select the programs you want to start with the system and enable them.

Confirm changes and restart your PC.

2: Reinstall the program

After every installation, the program or application should automatically create a shortcut in the system’s startup folder.

However, sometimes and for no apparent reason, the installation sequence simply skips on doing so.

Even though the way of manipulating startup programs changed, the containing folder is still there with Windows 10. And it still needs those shortcuts to run as intended.

You might also be interested in our guide on how to reinstall Windows Store apps in Windows 10

What you should do in this scenario is to try to repair the installation or reinstall the program.

Most programs offer the Repair option, but even the reinstallation shouldn’t take too much of your time, with only the largest ones being an exception.

In the Windows Search bar, type Control and open Control Panel.

In the Category View, open Uninstall a program.

Navigate to Program files or Program files (86) and delete the remainings in folders.

Also, you can use a third-party cleaner like CCleaner to delete the remaining traces stored in the registry.

Run the installer and install the program again.

3: Run DISM

Most of the steps we provided in this article relate to third-party programs. However, if some of the Windows-native applications won’t run at the startup, there’s an alternative way to address this.

We’re referring to DISM or Deployment Image Servicing and Management tool.

This tool can come in handy for various system-related issues, and since you’re unable to reinstall the, let’s say Task Manager, you can at least restart it with the little help of DISM.

If you’re not confident running this tool, we made sure to present you two ways it can be used in Windows 10. Follow the instructions below:

In the command line, type the following line and press Enter:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

Wait for the procedure to finish (it might take up to 10 minutes) and restart your PC.

And here’s the alternative way to run DISM:

Mount your Windows 10 installation media, either USB or ISO DVD.

Open Command Prompt (already explained how to above).

In the command line, type the following commands and press Enter after each:

DISM /online /Cleanup-Image /CheckHealth

If there’s not any single error, enter this command and press Enter:

DISM /online /Cleanup-Image / ScanHealth

If DISM finds any errors, enter the following commands and tap Enter:

DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSourceinstall.wim

Have in mind that you’ll need to replace the ”repair source” part with your installation media.

Wait for the procedure to end and restart your PC.

Although this is should help you with the majority of issues, it may not be the final solution for your issue. If that’s the case, make sure to continue with the steps we provided below.

4: Insert the shortcut manually

Now, the fact that you can’t locate the Startup folder in the Start menu like before, doesn’t mean that you can’t find it at all. It’s still there in Windows 10, hidden from the prying eyes.

Expert tip:

However, since that’s not always the case, you’ll need to take the matters into your own hands and create the shortcut on your own.

This shouldn’t be too much of a problem if you follow these instructions closely:

Navigate to the installation folder of the troublesome program.

Press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:


Copy the shortcut and paste it into the Startup folder.

Restart your PC and look for changes.

5: Create a batch file

Another possible solution also requires a manual approach. Namely, you can create a batch file and force a program to start with the system.

You’ll still be prompted with UAC message informing you about the program at every startup, nonetheless. But, đ at least you’ll be able to make it work.

Here’s how to create and run the batch file that enables you to run any program at the startup:

In the document, paste the following lines but don’t forget to change the example with the path to the program’s exe file.

@echo off

C:Program FilesDAEMON Tools LiteDTLauncher.exe


After the system starts next time, the program should start. Although, you’ll be prompted with UAC message.

6: Force the elevated program with Task Scheduler

The Task Scheduler is a built-in tool that enables you to create, schedule and run various tasks with the implementation of triggers and criteria you set.

This, obviously, means that you can set an EXE file to run with the system startup, setting At Startup as criteria or trigger.

If you never had a chance to use Task Scheduler to force a program to start with the system, make sure to follow these steps and we should be good to go:

In the Windows Search bar, type taskschd and open Task Scheduler.

Under the General tab, name the Task same as the program you’ll try to run. In this case, we’ve chosen DeamonTools for a showcase.

Check the Run with highest privileges box.

Select Windows 10 from the ”Configure for” drop-down menu and open the Actions tab.

From the Action drop-down menu, select Start a program.

In the Program/script field, paste the following command:


In the ”Add arguments (optional)” section, add the Task name and the path to the program’s EXE file (installation folder) in this manner:

/c start Task Name Full Path of Program

Don’t forget to replace the Task name and Full path to program’s EXE file above.

Now, finally press OK to confirm changes and you should be able to see the newly-created task.

Now press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:


Copy the program’s shortcut and paste it into the Startup folder.

schtasks /run /tn “Task Name”

Don’t forget to change the task name with the name of your actual task we just created. In our case, DeamonTools.

On the next screen, name the shortcut as the program is named. In our case DeamonTools Lite.

7: Disable UAC

User Account Control or UAC is one of those security measures that are certainly helpful to some extent but can become bothersome over time.

Especially if a certain program requires administrative permissions in order to run. By default, UAC will block these kinds of programs on startup, so the only thing that comes to our mind is to disable it completely.

I’ve always turned it Off on Windows 7 for various reasons, but it seems that the drawbacks are higher when it comes to Windows 10.

If you’re not sure how to disable User Account Control in Windows 10, follow the instructions below:

Type UAC in the Search bar and open Change User Account Control settings.

Move the slider to the bottom and confirm changes.

This should stop further prompts and enable you to start some of the troubled programs.

8: Edit registry

Mostly everything that you do within the Windows interface can be taken to a higher authority, which is Registry.

As you probably know, Windows Registry keeps all low-level settings of both system and third-party processes that appear in everyday use.

That makes it quite dangerous, so make sure not to meddle with registry inputs if you’re not 100% sure what you’re doing.

Nonetheless, with a careful approach, you should be able to easily force certain programs into starting with the system from the Registry Editor.

Make sure to follow the steps below closely and we should be good to go:

In the Windows Search bar, type regedit, and open Registry editor.

Open the File option and create a backup of your current registry state.

Follow this path:


Name value exactly as the program you want to run is named.

In the Value data field, paste the exact path of the program’s EXE file (including the exe file, like all the above-enlisted programs).

Save changes and restart your PC.

9: Reset this PC

Finally, if you’ve reached the brink of your nerves and the system just won’t comply, the only remaining solutions we can offer is to start from a scratch.

We won’t go as far as to recommend a clean reinstallation, and luckily, with Windows 10 you don’t need it. What you can do is to check for the recovery options and use Reset this PC.

Restoring the system to its default values should be the final resort, but also it can help.

In addition, you get to keep your files without losing any important data in the process. If you’re up for the task, follow the instructions below:

Press Windows key +I to open Settings.

Open Update & security.

Select Recovery from the left pane.

Was this page helpful?


Start a conversation

League Of Legends Not Opening: Why & How To Fix – Easy Peasy

League of Legends Not Opening: Why & How to Fix – Easy Peasy A reinstall is the most effective solution








Some users said updating their drivers, especially their GPU, did the trick.

Others tried launching the game from alternative locations, which also worked.

If all else fails, perform a complete game repair or reinstall work when League of Legends don’t open.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

When League of Legends is not opening on Windows 10, it can be as frustrating as fighting hordes of vicious enemies.

Many players report they often can’t launch the game due to various error messages or simply because nothing happens when they hit the play button.

If you’re experiencing this League of Legends start issue, you’ve come to the right place. In this article, we’re going to list a few workarounds.

Why is League of Legends not opening?

There are often a few triggers for users who have experienced this problem. At the top of the list, including the following:

Damaged or bad game files – In some cases, you may have game files damaged beyond use, which will cause the game not to respond when you try launching it.

Issues with antivirus programs – Compatibility issues may trigger this problem. The main culprits are your firewall or antivirus programs blocking the program.

Problems with the drivers – For some users, bad or outdated graphic drivers may cause the game not to launch as well.

Bad shortcuts – There is a chance that the game has a faulty shortcut, and you will have to start it from a different file.

Speaking of League of Legends issues, here are some variations to the not launching problem that users reported:

Let us now discuss some fixes.

How to fix League of Legends launch issues 1. Reinstall your graphics card drivers

Downloading drivers manually is a process that carries the risk of getting the wrong driver installed, which may lead to severe malfunctions.

Not only is there the risk of downloading the wrong drivers, but you can also end up installing a version that isn’t even the latest.

Keeping all drivers up-to- date and error-free is the key to play intense games without any crashes, lags, or freezes.

Since manual checks are challenging to do, we suggest using an automated assistant that will regularly check for new driver versions. Here is how to use it:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

Restart your PC for the changes to take effect.

Outbyte Driver Updater

Do not let a faulty driver disrupt your gaming experience, use Outbyte Driver Updater to run them without any issues.

Free trial Download now

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

2. Start the game directly from the installation directory

If League of Legends won’t start on your PC, the problem might be your shortcut.

If this solves the problem, you must always use this method to start the game. Alternatively, you can create a shortcut of chúng tôi on your Desktop and use it to start the game.

3. Reinstall the game

Alternatively, we suggest using an automated PC cleaning tool.

Expert tip:

In addition to removing the selected program, the uninstaller will remove all files and registry entries associated with that program.

As a result, it will be as if the application was never installed on your PC.

The Uninstall feature in CCleaner is easy to use, listing all apps on your PC. Just select what you want to remove, and your job is done. Once you remove the game, reinstall it, and your problem should be solved.

⇒ Get CCleaner

4. Disable all running League of Legends processes

The issue might be background processes if League of Legends won’t launch on your PC.

According to users, sometimes specific League of Legends processes might be running in the background, and that can cause this issue to appear.

5. Close problematic applications

According to users, sometimes other applications can interfere with League of Legends and cause issues like this.

One application that can interfere with your game is Steam, so if you’re using Steam, be sure to close it before starting League.

Once you close Steam, try to start the game again and check if the issue is still there.

Another application that can cause this problem is Razer Synapse, so if you have it installed, be sure to close it before starting the game.

Not being able to start League of Legends can be a big problem, but we hope you solved this issue using our solutions.

Was this page helpful?


Update the detailed information about Fix: Windows 10 Apps Not Opening on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!