You are reading the article Fix: Windows 10/11 Disconnects From Wi updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Windows 10/11 Disconnects From Wi
FIX: Windows 10/11 disconnects from Wi-Fi after Sleep Mode15
Share
X
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Many users reported that Wi-Fi disconnects after Sleep Mode on their PC, and this can be an annoying issue. However, there’s a way to fix this problem once and for all, and we’re going to show you how to do it.
Everyone is talking about Windows 10 Technical Preview and its pros and cons. But we mustn’t forget about the problems of other operating systems. Some users say that they’re unable to connect to WiFi after waking from sleep mode. But there are some fixes that may help them.
Sleep Mode disconnects network connection? Fix it with these solutionsThere are many problems with Wi-Fi that can occur, and in this article, we’re going to cover the following issues:
No internet after sleep Windows 10 – According to users this is a common problem. Even though their PC wakes up from Sleep Mode, there’s no Internet connection available.
Windows 10 WiFi keeps dropping – Another common problem that users can experience is Wi-Fi dropping. This is an annoying problem, but you should be able to fix it with one of our solutions.
Windows keeps disconnecting from WiFi – This is another common problem that can occur with Wi-Fi. According to users, Windows keeps disconnecting from Wi-Fi after waking up from Sleep Mode.
WiFi disconnects sign in required – By default, Windows will ask you to sign in when you wake up from Sleep Mode. This is a standard security feature, but it can sometimes cause problems with Wi-Fi.
Sleep mode WiFi will not connect – This is another problem that can occur after you put your PC to sleep. According to users, they can’t connect to Wi-Fi at all after waking up their PC.
Sleep mode WiFi doesn’t work – This is another variation of this problem, and users reported that their Wi-Fi doesn’t work after waking up their PC. Although this is an annoying problem, you should be able to fix it with one of our solutions.
1. Change Power Management SettingsOne of the most common causes of this issue is the wrong Power Management plan. You should check if your Wireless network adapter is not set to be turned off to save power when computers go to sleep mode.
If it the current Power Management plan turns off your Wireless adapter while in sleep mode, just change it and your problem will be solved. You can check if it is the case and change your current Power Management plan in Device Manager. Do so, follow these instructions:
2. Uncheck the IPv6 boxIf the wrong Power Management plan is not an issue, you might have some problems with IPv6 protocol. In order to disable it, you should perform a couple of operations in your Network and Sharing Center. To untick the IPv6 box, follow these steps:
3. Use Network troubleshooterIf Windows disconnects from Wi-Fi after sleep, you might be able to fix this problem with this simple workaround. According to users, you just have to run the Network troubleshooter by following these steps:
After the troubleshooter is finished, check if the issue still appears. Many users reported that this solution worked for them, so feel free to try it. We have to mention that this might not be a permanent solution, so you’ll have to repeat it whenever the issue appears.
4. Change your power settingsAccording to users, sometimes Windows disconnects from Wi-Fi after sleep due to your power settings. Users reported that they fixed the problem simply by following these steps:
After doing that, your problems with Wi-Fi should be completely resolved.
5. Disable Broadcom BluetoothIf Windows disconnects from Wi-Fi after sleep, the problem might be your Bluetooth adapter. It seems that Broadcom Bluetooth starts automatically with Windows causing this problem to occur. To fix this problem, you can do the following:
If you can’t find the Bluetooth service in Startup tab, you can disable it by doing the following:
After making the necessary changes you need to restart your PC in order to apply them. Keep in mind that disabling the Bluetooth service might not be the best solution if you use Bluetooth devices frequently. To use your Bluetooth devices again, you’ll have to enable the disabled services.
6. Disable your antivirusExpert tip:
After removing your antivirus and firewall, check if the issue still appears. If the issue is resolved, you might have to reinstall your antivirus again or switch to a different antivirus solution.
You can find plenty of great Windows 10 compatible antivirus software that will not interfere with your system. Just make sure it has a good threat database, real-time protection, a transparent privacy policy, and good online security.
7. Make sure that Ethernet is disabledIf Windows disconnects from Wi-Fi after sleep, the problem might be your Ethernet connection. One of the fastest ways to fix this problem is to make sure that your Ethernet connection is disabled. This is rather simple and you can do it by following these steps:
After disabling your Ethernet connection check if the issue is resolved. In addition, you can also perform this solution simply by disconnecting your Ethernet cable from your PC.
8. Change your connection to PrivateSometimes this issue can occur because your network connection is set to Public. Public network connections use a different set of rules, and sometimes that can cause certain issues to occur. If Windows disconnects from Wi-Fi after sleep, you can fix that by doing the following:
After enabling this option your connection will automatically change to Private fixing any Wi-Fi issues.
9. Disable Require sign-inAccording to users, sometimes Wi-Fi problems can be caused by your settings. By default, Windows will ask you for your password once you wake up your PC.
This is a security measure, but many users reported that this feature is causing Windows to disconnect from Wi-Fi. To fix this problem, you just have to disable this feature by following these steps:
After changing this setting your PC won’t require you to login after waking up from Sleep Mode. Disabling this feature can be a slight security concern, but it should help you with this problem.
10. Perform a System RestoreIf you’re still having this problem, perhaps you can fix it by performing System Restore. To do that, follow these steps:
Once your PC is restored, check if the problem is resolved.
Was this page helpful?
x
You're reading Fix: Windows 10/11 Disconnects From Wi
How To Fix Iphone Keeps Disconnecting From Wi
How to Fix iPhone Keeps Disconnecting From Wi-Fi Network
Looking for some answers on why your iPhone keeps dropping its Wi-Fi signal? Well, we’ve got your back with a few nifty tricks to put an end to this annoying issue.
Let’s get started.
Common Causes of iPhone Wi-Fi Disconnect Issues
Interference: Nearby electronic devices, thick walls, or other Wi-Fi networks can interfere with your iPhone’s Wi-Fi signal, leading to frequent disconnections.
Software glitches: Outdated software or conflicting settings on your iPhone may disrupt the Wi-Fi connection.
Router issues: Problems with your Wi-Fi router, such as outdated firmware or incorrect settings, can contribute to the disconnection woes.
Read Also: Fixed! Wi-Fi Keeps Disconnecting On Android Problem
Fix iPhone Keeps Disconnecting From Wi-Fi Network 1. Restart Your iPhone and Wi-Fi RouterSometimes, a simple restart can do wonders! Begin by turning off your iPhone and then switching off your Wi-Fi router temporarily. After a few seconds, turn on your router and wait for it to establish a stable connection. Next, power up your iPhone and navigate to the Wi-Fi settings. Connect to your Wi-Fi network and see if the disconnection issue persists. Often, this basic troubleshooting step can resolve temporary glitches and restore a stable connection.
Read Also: How To Fix iPadOS 16/iOS 16 Stuck in Recovery Mode and Won’t Restore?
2. Update Your iPhone’s SoftwareOutdated software can lead to compatibility issues and disrupt the Wi-Fi connection on your iPhone. To address this, check for any available software updates. Head to the Settings app, select “General,” and then tap on “Software Update.”
If an update is available, follow the prompts to download and install it. Once the update is complete, reconnect to your Wi-Fi network and check if the disconnect issue is resolved. Keeping your iPhone’s software up to date not only enhances performance but also ensures compatibility with the latest Wi-Fi protocols.
3. Ensure Auto Join Is Turned OnOne of the primary causes of the persistent Wi-Fi disconnection problem on iPhones is often attributed to the disabled Auto-join feature. Enabling this feature is crucial in resolving the issue and ensuring a stable connection.
To do follow the steps below:
4. Turn Off Wi-Fi AssistWi-Fi Assist is a feature that automatically switches your iPhone to cellular data when the Wi-Fi signal is weak. While this can be helpful, it can also contribute to frequent disconnects. To prevent this, we recommend disabling Wi-Fi Assist by default. By doing so, you regain control over your network connectivity and avoid draining your cellular data plan unnecessarily, especially when you frequently encounter poor Wi-Fi signals.
Open Settings and head over to the Cellular option, tap on it. Scroll down until you see the Wi-Fi Assist option. To disable Wi-Fi Assist, simply hit the toggle switch to turn it off.
Read Also: Wi-Fi Calling Not Working: Easy Fixes for Android & iPhone
5. Reset Network SettingsIf your iPhone’s network settings are misconfigured, it can cause connectivity problems. Resetting the network settings can help resolve these issues. Keep in mind that this action will erase saved Wi-Fi networks, so you need to remember your current connections & their passcodes. So, that if needed, you can reconnect to your Wi-Fi network afterward. Resetting network settings can often eliminate conflicting configurations and restore a stable connection.
6. Forget the Faulty NetworkIf you’ve recently modified your Wi-Fi password, experienced inconsistent internet connectivity, or installed a new router, there’s a good chance that this fix will resolve your issue. Taking these factors into consideration, implementing the suggested solution is likely to address the problem and restore a stable Wi-Fi connection on your device.
7. Contact Apple Support Bid Adieu to iPhone Keeps Disconnecting From Wi-Fi Network IssueImplementing these solutions step by step will increase your chances of resolving the iPhone Wi-Fi disconnect issue. Remember to test the connection after each step to determine if the problem has been resolved. When encountering connectivity problems, it’s essential to remember that they are often caused by minor bugs or glitches rather than indicating significant hardware or software issues. It’s important not to panic!
Next Read:
iPhone Not Connecting To Wi-Fi? Here’s How To Fix
Quick Reaction:About the author
Sourabh Baghel
Fix Vpn Error 807 On Windows 11/10
This post features solutions to fix VPN Error 807 on Windows 11/10. A VPN or Virtual Private Network is a mechanism that creates a secure connection between a device and a network or event to networks. But recently, some users have complained about errors while connecting to a VPN network. Fortunately, you can follow these suggestions to fix it.
Error 807: The network connection bewteen your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity.
What is VPN Error 807 in Windows?Error 807 while connecting to a VPN network can occur due to an error within the VPN’s transmission. This can be a result of internet latency indicating that your VPN server has reached its capacity. To fix this, try reconnecting to the VPN server from a different location or contacting the administrator.
Fix VPN Error 807 on Windows 11/10To fix VPN Error 807 on your Windows device, check your VPN settings and disable Windows Defender Firewall temporarily. However, if that doesn’t help, follow these tested fixes:
Run Network Adapter Troubleshooter
Check your Internet Connection
Disable Windows Defender Firewall
Check VPN Settings
Try a Different Server Location
Now let us see these in detail.
1] Run Network Adapter TroubleshooterBefore getting started with different troubleshooting methods to fix this issue, try running Microsoft’s Network Troubleshooters as a first step to diagnose and repair common Network issues. Here’s how:
Press the Windows key + I to open Settings.
2] Check your Internet ConnectionVPN errors can also occur if you have an unstable Internet connection. Perform a speed test to check if anything is wrong with your Internet connection. If the internet speed is less than the plan you opted for, try restarting your router and modem. However, contact your service provider if restarting your router and modem doesn’t work.
3] Disable Windows Defender FirewallWindows Defender Firewall sometimes makes games and apps malfunction. Turn it off and check if it fixes the VPN error 807. Here is how you can do it:
Select Turn Windows Defender Firewall on or off in the left pane.
Now, check the option that says Turn off Windows Defender Firewall under both Private and Public network settings.
4] Check VPN SettingsCheck if all the credentials entered for the VPN network, including the server address, username, and password, are correct. Here is how you can do it:
Press the Windows key + I to open Settings.
Ensure that the connection type to Point to Point Tunneling Protocol (PPTP).
5] Try a Different Server LocationIf none of these suggestions were able to help, try connecting through a different server location. Connect via a different server location and check if the error gets fixed. However, if it still doesn’t help, try using a different VPN client.
I hope this post helps you.
Also read: Common VPN error codes and solutions for Windows
Why is my VPN showing connection error?Your VPN connection can show errors due to various reasons. One of the significant reasons this occurs is connectivity issues. However, it may occur if the VPN server is experiencing a down time or is under maintenance. To fix this, update the VPN software and check if the VPN settings are correct.
How do I fix VPN connection failed?If the VPN connection failed error keeps troubling you, check if your device is connected to a stable internet connection. Next, try connecting via a different server and disable your antivirus/firewall temporarily. However, if that doesn’t work, contact your VPN administrator, who can offer additional support.
Fix Disk Management Errors On Windows 11/10
Disk errors are one of the most common errors on Windows 11/10. It is also scary because all our data are on the disk drives, and even with backup in place, its time consuming to restore all of them. That said, most of these disk errors can be resolved, and this is exactly what we are going to talk about in this post. Check out the best tips for troubleshooting common Disk Management error messages on Windows 11/10.
Fix Disk Management errors on Windows 11/10This post will help you fix Disk Management errors like:
A disk’s status is Not Initialized or the disk is missing,
A basic or dynamic disk’s status is Unreadable,
A dynamic disk’s status is Foreign,
A dynamic disk’s status is Online (Errors),
A dynamic disk’s status is Offline or Missing,
A basic or dynamic volume’s status is Failed,
A basic or dynamic volume’s status is Unknown,
A dynamic volume’s status is Data Incomplete,
A dynamic volume’s status is Healthy (At Risk),
Cannot manage striped volumes using Disk Management or DiskPart,
Disk Management cannot start the Virtual Disk Service.
Before we start, remember two things. First, you need an account with administrator privileges. Second, be very very careful using the disk management tools. One mistake, and you can lose all your data, and there is no way to undo things without losing the data on those drives.
To open Disk Management tool, follow the below steps:
In the Run prompt, type compmgmt.msc, and hit Enter.
This will launch the Computer Management console.
Pre-checks:
I am assuming that your drive is properly connected to the PC, and if it’s an external drive, it is connected properly to the USB port.
Make sure to check this before starting, and always try connecting to another PC to see if it works there.
If the device works on another PC, try running the Disk Error Checker.
A disk’s status is Not Initialized or the disk is missingMany a time your partition or drive does not appear in File Explorer. To check if it’s physically there, open the Disk management. Check if you see it as Not Initialized. If yes, then it simply means that the disk doesn’t have a valid signature, i.e., it’s not properly registered with the system. A disk is registered when you format it at least once. If the disk was available before, then it’s probably corrupted somehow.
If it is a new drive, you can simply initialize it; however, if that’s not the case, we need to try other solutions.
Bring it Online & Add Drive Letter:
Lastly, you can choose to format it in either NTFS or FAT32. If you are using 64bit, make sure to use NTFS. This will remove all the data from your disk.
Check Device Manager for issues.
It is possible that because of driver issues, the hard drive is not working properly. It’s always a good idea to check on the Drive Manager to see that the drive listing has a yellow exclamation mark next to it. If that’s the case:
Similar: All options greyed out in Disk Management.
A basic or dynamic disk’s status is UnreadableIf you are facing this problem, the chances are that your hard drive has experienced a hardware failure or some irreversible corruption. It is also possible that the system’s disk configuration database might be corrupted, and the error message you will get in that case is ‘Unreadable’. You can try it on some other computer, but replacing your hard drive is the only solution here.
Read: SSD not showing up in Disk Management or BIOS in Windows.
A dynamic disk’s status is ForeignWhen you move a dynamic disk from one computer to another, you will get a warning icon next to it with Foreign status. Dynamic disks offer the ability to create fault-tolerant volumes that may even span multiple disks – which Basic disks cannot. When you create a dynamic disk, the configuration disk is stored on all dynamic disks, and the information of who owns is lost when switching between PCs.
Now that you know of Dynamic Disk, here is the list of errors, and their solution around Dynamic Disk.
A dynamic disk’s status is Online (Errors) A dynamic disk’s status is Offline or MissingTo bring a disk that is Offline and is still named Disk # (not Missing) back online:
Try to Reactivate Disk to bring the disk back online
Check-in Event Viewer if you have an error that says “No good config copies”. If yes, the Microsoft Product Support team might help you.
Try connecting to another computer, especially with that which has dynamic disks. If it gets online, import the disk on that computer, and bring it back to the PC on which it wasn’t working.
A basic or dynamic volume’s status is FailedThat said, if the dynamic volume is a mirrored or RAID-5 volume with old data, bringing the underlying disk online will not automatically restart the volume. You will need to bring the other connected disks online first, so it makes sure the data is in sync, and then restarts the mirrored or RAID-5 volume manually, and then run the Error-checking tool or Chkdsk.exe.
A basic or dynamic volume’s status is UnknownIn this state, the boot sector of the volume is corrupted, and the data is no longer available. It is also possible that the new disk setup wasn’t complete. To resolve, you need to Initialize it again.
In Disk Management make sure to check if the status is Online, else you need to bring it online first.
After the wizard completes its job, you should have access to it.
A dynamic volume’s status is Data IncompleteWindows 10 supports multi-disk volume. If you have removed one of the disks and moved it to another computer, it will not work, and will also destroy all the data unless you move and import the remaining disks that contain this volume.
So the solution is to move all the disks which are part of the multi-disk volume to the computer and import it. The disks will be marked as a Foreign disk. We have already stated above on how you can import, and activate those disks.
A dynamic volume’s status is Healthy (At Risk)If one of your dynamic volumes is marked as at Risk, even if they are healthy, it indicates that there are some IO errors on the underlying part. It could be because of the one on the disk, but it makes all the volumes are Risk. One of the disks must have gone offline.
To resolve this, you will need to bring back the disk to Online Status, and it will restore the status, but if that doesn’t work, you will need to replace that disk
Cannot manage striped volumes using Disk Management or DiskPart Disk Management cannot start the Virtual Disk ServiceThis usually appears when the remote computer is blocking the Virtual Disk Service (VDS) because of the Firewall or the remote computer doesn’t support VDS at all. VDS service allows one to remotely connect to another computer Disk Management tool, and then let the admin configure it.
You can either configure Windows Defender Firewall to enable the Remote Volume Management Exception or remote login to that computer and then use Disk Management.
Fix: Quicktime Install Error In Windows 10/11
FIX: QuickTime install error in Windows 10/11 [Quick Guide]
760
Share
X
QuickTime install errors became notorious in the past few years. Ready to solve them for good?
Before imaging the worst, install an older version or run the installer in the compatibility mode.
Since you’re here, you may also be interested in the best software tools to turn photos into videos.
Similar issues arise regularly. Solving them is our specialty, so don’t hesitate to visit this Software Troubleshooting Hub.
There are a lot of redundant applications that, over the years, found their end on the software scrap yard. One of those is QuickTime.
That’s Apple’s multimedia framework and player for once scarce and nowadays common video formats.
If you’re not using old Adobe’s applications, there’s a chance that you don’t need it at all, especially since it’s discontinued and doesn’t support Windows 10.
On the other hand, the fact that there are still interested users and the installation on Windows 10 ends with an error, we decided to find alternative ways to obtain and utilize QuickTime on your Windows 10 PC.
How can I install Apple’s QuickTime in Windows 10? 1. Run the installer in the compatibility modeHowever, if you’re eternally bound to this nifty player, we’ll help you use it in the safest possible way.
There are various ways to approach the incompatibility of QuickTime with the latest Windows iteration.
The first one is to try and run the installer in the compatibility mode for Windows Vista and move from there.
If you’re not certain how to run the QuickTime installer in the compatibility mode, make sure to follow the above instructions.
2. Try installing an older version
Navigate to Apple’s support website and choose an older version of QuickTime.
Download the QuickTime installer and run it in the compatibility mode for Vista and with the administrative permission.
Wait until the installation is finished and check if the issue is solved.
Even though this is quite uncommon, some of the latest versions could be the ones with issues on Windows 10.
However, for some peculiar reason, users were able to install an older iteration of QuickTime and update it later on. This, of course, requires, some effort and meddling with untrusted sources.
It’s strange for the once widely acknowledged application to completely vanish from the official sites. Even though there are still formats that are related to Apple’s legacy player.
Also, due to improvements in applications once dependent on QuickTime, you won’t need it to play videos in a browser or to use Adobe’s suits.
Finally, we sometimes just need to let go, as there are probably good reasons why QuickTime for Windows is primarily neglected and then discontinued.
3. Use a reliable QuickTime alternativeIf you’re in need of QuickTime but can’t get it to work, the next thing you should do is to turn to an alternative.
Long story short, Cyberlink PowerDVD should be able to replace it just fine. It’s small and well-designed and, proverbially, there’s no current video format that can’t be played with Cyberlink PowerDVD.
Besides getting the highest quality media playback available these days, this tool is about to turn into your personal media collection that gathers all your photos, music, and video files.
⇒ Get Cyberlink PowerDVD
Was this page helpful?
x
Start a conversation
Fix: Startup Folder Not Working In Windows 10/11
FIX: Startup folder not working in Windows 10/11
868
Share
X
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
The most common problem with startup programs is that they tend to bloat your system and slow down the startup process.
The dozens of programs in combination with an old HDD mean that you’ll wait for some time until the PC finally boots.
However, there’s also the opposite of it – when programs in Windows Startup folder just won’t start no matter what you do.
For the sake of dealing with this annoyance, we prepared an in-depth list that should provide you with enough resources to address this problem.
In case you’re trying to make a program start with the system without success, make sure to take a look below.
What can I do when programs from Startup folder won’t start? 1: Check the Startup managerBack in the days, you had to turn to System Configuration in order to tweak the startup programs. There were all Windows services, too, so there are a lot of things you couldn’t touch.
A tad overcomplicated for a standard user. Others turned to third-party tools that were more of a bloatware than the solution. Luckily, that’s not the case with Windows 10.
Now, you can navigate to good old Task Manager and find all startup programs you need.
You can enable or disable any of them based on your needs.
If you’re not sure how to use newly added Startup manager in Windows 10, follow the instructions below:
Press Ctrl + Shift + Esc to open Task Manager.
Open the Startup tab.
Select the programs you want to start with the system and enable them.
Confirm changes and restart your PC.
2: Reinstall the programAfter every installation, the program or application should automatically create a shortcut in the system’s startup folder.
However, sometimes and for no apparent reason, the installation sequence simply skips on doing so.
Even though the way of manipulating startup programs changed, the containing folder is still there with Windows 10. And it still needs those shortcuts to run as intended.
You might also be interested in our guide on how to reinstall Windows Store apps in Windows 10
What you should do in this scenario is to try to repair the installation or reinstall the program.
Most programs offer the Repair option, but even the reinstallation shouldn’t take too much of your time, with only the largest ones being an exception.
In the Windows Search bar, type Control and open Control Panel.
In the Category View, open Uninstall a program.
Navigate to Program files or Program files (86) and delete the remainings in folders.
Also, you can use a third-party cleaner like CCleaner to delete the remaining traces stored in the registry.
Run the installer and install the program again.
3: Run DISMMost of the steps we provided in this article relate to third-party programs. However, if some of the Windows-native applications won’t run at the startup, there’s an alternative way to address this.
We’re referring to DISM or Deployment Image Servicing and Management tool.
This tool can come in handy for various system-related issues, and since you’re unable to reinstall the, let’s say Task Manager, you can at least restart it with the little help of DISM.
If you’re not confident running this tool, we made sure to present you two ways it can be used in Windows 10. Follow the instructions below:
In the command line, type the following line and press Enter:
DISM /online /Cleanup-Image / ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
Wait for the procedure to finish (it might take up to 10 minutes) and restart your PC.
And here’s the alternative way to run DISM:
Mount your Windows 10 installation media, either USB or ISO DVD.
Open Command Prompt (already explained how to above).
In the command line, type the following commands and press Enter after each:
DISM /online /Cleanup-Image /CheckHealth
If there’s not any single error, enter this command and press Enter:
DISM /online /Cleanup-Image / ScanHealth
If DISM finds any errors, enter the following commands and tap Enter:
DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSourceinstall.wim
Have in mind that you’ll need to replace the ”repair source” part with your installation media.
Wait for the procedure to end and restart your PC.
Although this is should help you with the majority of issues, it may not be the final solution for your issue. If that’s the case, make sure to continue with the steps we provided below.
4: Insert the shortcut manuallyNow, the fact that you can’t locate the Startup folder in the Start menu like before, doesn’t mean that you can’t find it at all. It’s still there in Windows 10, hidden from the prying eyes.
Expert tip:
However, since that’s not always the case, you’ll need to take the matters into your own hands and create the shortcut on your own.
This shouldn’t be too much of a problem if you follow these instructions closely:
Navigate to the installation folder of the troublesome program.
Press Windows + R to open the elevated Run command line.
In the command line type to open the Startup folder:
shell:startup
Copy the shortcut and paste it into the Startup folder.
Restart your PC and look for changes.
5: Create a batch fileAnother possible solution also requires a manual approach. Namely, you can create a batch file and force a program to start with the system.
You’ll still be prompted with UAC message informing you about the program at every startup, nonetheless. But, đ at least you’ll be able to make it work.
Here’s how to create and run the batch file that enables you to run any program at the startup:
In the document, paste the following lines but don’t forget to change the example with the path to the program’s exe file.
@echo off
C:Program FilesDAEMON Tools LiteDTLauncher.exe
exit
After the system starts next time, the program should start. Although, you’ll be prompted with UAC message.
6: Force the elevated program with Task SchedulerThe Task Scheduler is a built-in tool that enables you to create, schedule and run various tasks with the implementation of triggers and criteria you set.
This, obviously, means that you can set an EXE file to run with the system startup, setting At Startup as criteria or trigger.
If you never had a chance to use Task Scheduler to force a program to start with the system, make sure to follow these steps and we should be good to go:
In the Windows Search bar, type taskschd and open Task Scheduler.
Under the General tab, name the Task same as the program you’ll try to run. In this case, we’ve chosen DeamonTools for a showcase.
Check the Run with highest privileges box.
Select Windows 10 from the ”Configure for” drop-down menu and open the Actions tab.
From the Action drop-down menu, select Start a program.
In the Program/script field, paste the following command:
%windir%System32cmd.exe
In the ”Add arguments (optional)” section, add the Task name and the path to the program’s EXE file (installation folder) in this manner:
/c start Task Name Full Path of Program
Don’t forget to replace the Task name and Full path to program’s EXE file above.
Now, finally press OK to confirm changes and you should be able to see the newly-created task.
Now press Windows + R to open the elevated Run command line.
In the command line type to open the Startup folder:
shell:startup
Copy the program’s shortcut and paste it into the Startup folder.
schtasks /run /tn “Task Name”
Don’t forget to change the task name with the name of your actual task we just created. In our case, DeamonTools.
On the next screen, name the shortcut as the program is named. In our case DeamonTools Lite.
7: Disable UACUser Account Control or UAC is one of those security measures that are certainly helpful to some extent but can become bothersome over time.
Especially if a certain program requires administrative permissions in order to run. By default, UAC will block these kinds of programs on startup, so the only thing that comes to our mind is to disable it completely.
I’ve always turned it Off on Windows 7 for various reasons, but it seems that the drawbacks are higher when it comes to Windows 10.
If you’re not sure how to disable User Account Control in Windows 10, follow the instructions below:
Type UAC in the Search bar and open Change User Account Control settings.
Move the slider to the bottom and confirm changes.
This should stop further prompts and enable you to start some of the troubled programs.
8: Edit registryMostly everything that you do within the Windows interface can be taken to a higher authority, which is Registry.
As you probably know, Windows Registry keeps all low-level settings of both system and third-party processes that appear in everyday use.
That makes it quite dangerous, so make sure not to meddle with registry inputs if you’re not 100% sure what you’re doing.
Nonetheless, with a careful approach, you should be able to easily force certain programs into starting with the system from the Registry Editor.
Make sure to follow the steps below closely and we should be good to go:
In the Windows Search bar, type regedit, and open Registry editor.
Open the File option and create a backup of your current registry state.
Follow this path:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRun
Name value exactly as the program you want to run is named.
In the Value data field, paste the exact path of the program’s EXE file (including the exe file, like all the above-enlisted programs).
Save changes and restart your PC.
9: Reset this PCFinally, if you’ve reached the brink of your nerves and the system just won’t comply, the only remaining solutions we can offer is to start from a scratch.
We won’t go as far as to recommend a clean reinstallation, and luckily, with Windows 10 you don’t need it. What you can do is to check for the recovery options and use Reset this PC.
Restoring the system to its default values should be the final resort, but also it can help.
In addition, you get to keep your files without losing any important data in the process. If you’re up for the task, follow the instructions below:
Press Windows key +I to open Settings.
Open Update & security.
Select Recovery from the left pane.
Was this page helpful?
x
Start a conversation
Update the detailed information about Fix: Windows 10/11 Disconnects From Wi on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!