Trending February 2024 # Fix: Startup Folder Not Working In Windows 10/11 # Suggested March 2024 # Top 3 Popular

You are reading the article Fix: Startup Folder Not Working In Windows 10/11 updated in February 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix: Startup Folder Not Working In Windows 10/11

FIX: Startup folder not working in Windows 10/11

868

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

The most common problem with startup programs is that they tend to bloat your system and slow down the startup process.

The dozens of programs in combination with an old HDD mean that you’ll wait for some time until the PC finally boots.

However, there’s also the opposite of it – when programs in Windows Startup folder just won’t start no matter what you do.

For the sake of dealing with this annoyance, we prepared an in-depth list that should provide you with enough resources to address this problem.

In case you’re trying to make a program start with the system without success, make sure to take a look below.

What can I do when programs from Startup folder won’t start? 1: Check the Startup manager

Back in the days, you had to turn to System Configuration in order to tweak the startup programs. There were all Windows services, too, so there are a lot of things you couldn’t touch.

A tad overcomplicated for a standard user. Others turned to third-party tools that were more of a bloatware than the solution. Luckily, that’s not the case with Windows 10.

Now, you can navigate to good old Task Manager and find all startup programs you need.

You can enable or disable any of them based on your needs.

If you’re not sure how to use newly added Startup manager in Windows 10, follow the instructions below:

Press Ctrl + Shift + Esc to open Task Manager.

Open the Startup tab.

Select the programs you want to start with the system and enable them.

Confirm changes and restart your PC.

2: Reinstall the program

After every installation, the program or application should automatically create a shortcut in the system’s startup folder.

However, sometimes and for no apparent reason, the installation sequence simply skips on doing so.

Even though the way of manipulating startup programs changed, the containing folder is still there with Windows 10. And it still needs those shortcuts to run as intended.

You might also be interested in our guide on how to reinstall Windows Store apps in Windows 10

What you should do in this scenario is to try to repair the installation or reinstall the program.

Most programs offer the Repair option, but even the reinstallation shouldn’t take too much of your time, with only the largest ones being an exception.

In the Windows Search bar, type Control and open Control Panel.

In the Category View, open Uninstall a program.

Navigate to Program files or Program files (86) and delete the remainings in folders.

Also, you can use a third-party cleaner like CCleaner to delete the remaining traces stored in the registry.

Run the installer and install the program again.

3: Run DISM

Most of the steps we provided in this article relate to third-party programs. However, if some of the Windows-native applications won’t run at the startup, there’s an alternative way to address this.

We’re referring to DISM or Deployment Image Servicing and Management tool.

This tool can come in handy for various system-related issues, and since you’re unable to reinstall the, let’s say Task Manager, you can at least restart it with the little help of DISM.

If you’re not confident running this tool, we made sure to present you two ways it can be used in Windows 10. Follow the instructions below:

In the command line, type the following line and press Enter:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

Wait for the procedure to finish (it might take up to 10 minutes) and restart your PC.

And here’s the alternative way to run DISM:

Mount your Windows 10 installation media, either USB or ISO DVD.

Open Command Prompt (already explained how to above).

In the command line, type the following commands and press Enter after each:

DISM /online /Cleanup-Image /CheckHealth

If there’s not any single error, enter this command and press Enter:

DISM /online /Cleanup-Image / ScanHealth

If DISM finds any errors, enter the following commands and tap Enter:

DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSourceinstall.wim

Have in mind that you’ll need to replace the ”repair source” part with your installation media.

Wait for the procedure to end and restart your PC.

Although this is should help you with the majority of issues, it may not be the final solution for your issue. If that’s the case, make sure to continue with the steps we provided below.

4: Insert the shortcut manually

Now, the fact that you can’t locate the Startup folder in the Start menu like before, doesn’t mean that you can’t find it at all. It’s still there in Windows 10, hidden from the prying eyes.

Expert tip:

However, since that’s not always the case, you’ll need to take the matters into your own hands and create the shortcut on your own.

This shouldn’t be too much of a problem if you follow these instructions closely:

Navigate to the installation folder of the troublesome program.

Press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:

shell:startup

Copy the shortcut and paste it into the Startup folder.

Restart your PC and look for changes.

5: Create a batch file

Another possible solution also requires a manual approach. Namely, you can create a batch file and force a program to start with the system.

You’ll still be prompted with UAC message informing you about the program at every startup, nonetheless. But, đ at least you’ll be able to make it work.

Here’s how to create and run the batch file that enables you to run any program at the startup:

In the document, paste the following lines but don’t forget to change the example with the path to the program’s exe file.

@echo off

C:Program FilesDAEMON Tools LiteDTLauncher.exe

exit

After the system starts next time, the program should start. Although, you’ll be prompted with UAC message.

6: Force the elevated program with Task Scheduler

The Task Scheduler is a built-in tool that enables you to create, schedule and run various tasks with the implementation of triggers and criteria you set.

This, obviously, means that you can set an EXE file to run with the system startup, setting At Startup as criteria or trigger.

If you never had a chance to use Task Scheduler to force a program to start with the system, make sure to follow these steps and we should be good to go:

In the Windows Search bar, type taskschd and open Task Scheduler.

Under the General tab, name the Task same as the program you’ll try to run. In this case, we’ve chosen DeamonTools for a showcase.

Check the Run with highest privileges box.

Select Windows 10 from the ”Configure for” drop-down menu and open the Actions tab.

From the Action drop-down menu, select Start a program.

In the Program/script field, paste the following command:

%windir%System32cmd.exe

In the ”Add arguments (optional)” section, add the Task name and the path to the program’s EXE file (installation folder) in this manner:

/c start Task Name Full Path of Program

Don’t forget to replace the Task name and Full path to program’s EXE file above.

Now, finally press OK to confirm changes and you should be able to see the newly-created task.

Now press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:

shell:startup

Copy the program’s shortcut and paste it into the Startup folder.

schtasks /run /tn “Task Name”

Don’t forget to change the task name with the name of your actual task we just created. In our case, DeamonTools.

On the next screen, name the shortcut as the program is named. In our case DeamonTools Lite.

7: Disable UAC

User Account Control or UAC is one of those security measures that are certainly helpful to some extent but can become bothersome over time.

Especially if a certain program requires administrative permissions in order to run. By default, UAC will block these kinds of programs on startup, so the only thing that comes to our mind is to disable it completely.

I’ve always turned it Off on Windows 7 for various reasons, but it seems that the drawbacks are higher when it comes to Windows 10.

If you’re not sure how to disable User Account Control in Windows 10, follow the instructions below:

Type UAC in the Search bar and open Change User Account Control settings.

Move the slider to the bottom and confirm changes.

This should stop further prompts and enable you to start some of the troubled programs.

8: Edit registry

Mostly everything that you do within the Windows interface can be taken to a higher authority, which is Registry.

As you probably know, Windows Registry keeps all low-level settings of both system and third-party processes that appear in everyday use.

That makes it quite dangerous, so make sure not to meddle with registry inputs if you’re not 100% sure what you’re doing.

Nonetheless, with a careful approach, you should be able to easily force certain programs into starting with the system from the Registry Editor.

Make sure to follow the steps below closely and we should be good to go:

In the Windows Search bar, type regedit, and open Registry editor.

Open the File option and create a backup of your current registry state.

Follow this path:

HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRun

Name value exactly as the program you want to run is named.

In the Value data field, paste the exact path of the program’s EXE file (including the exe file, like all the above-enlisted programs).

Save changes and restart your PC.

9: Reset this PC

Finally, if you’ve reached the brink of your nerves and the system just won’t comply, the only remaining solutions we can offer is to start from a scratch.

We won’t go as far as to recommend a clean reinstallation, and luckily, with Windows 10 you don’t need it. What you can do is to check for the recovery options and use Reset this PC.

Restoring the system to its default values should be the final resort, but also it can help.

In addition, you get to keep your files without losing any important data in the process. If you’re up for the task, follow the instructions below:

Press Windows key +I to open Settings.

Open Update & security.

Select Recovery from the left pane.

Was this page helpful?

x

Start a conversation

You're reading Fix: Startup Folder Not Working In Windows 10/11

Where Is The Startup Folder In Windows 11/10 For All Users

The Startup folder contains a list of application shortcuts that run automatically every time you start up your computer. You can add programs by adding their shortcuts to the folder to make them run during your Windows 11 or Windows 10 startup. You can also remove any of them if you don’t want them to run during startup.

Location of Startup Folder for All users

Here’s how to go to the all-users’ startup folder in Windows 10 or Windows 11:

Open File Explorer from the start menu.

Browse to the following directory. C:ProgramDataMicrosoftWindowsStart MenuProgramsStartUp

Please take note that the above directory is assuming your default Windows was installed in C: drive. If your Windows is in another drive, change the drive letter.

Add or remove any program’s shortcut into or from the folder.

Another much faster way to go to the startup folder in Windows 11/10:

Go to start menu and type Run. Hit enter.

In the Open field, type shell:common startup and then hit enter.

Startup Folder for Current User Only

If you would like to configure startup for only the currently logged-in user, here’s where you should go:

Open File Explorer.

Browse to the following folder. C:UsersUsernameAppDataRoamingMicrosoftWindowsStart MenuProgramsStartup

Replace the Username with the actual username you’re currently using in your Windows system.

Add or remove any shortcut as you want.

Another quicker method to go to this folder:

Go to start menu and type Run. Press enter.

Type shell:startup in the open field and press enter.

Configure Windows 11/10 Startup Apps from Msconfig

Not all application EXE shortcuts would be shown in the startup folder mentioned above. Some would not be there but would still run during startup. To have a clearer view of all the background programs and services that would run during the startup of your Windows 10 computer, use Msconfig. Here’s how:

Go to Start, then Run.

Type msconfig and hit enter.

In the System Configuration window, go to the Startup tab.

Programs shown in the startup list are all the programs that would run during startup.

Additional Tips for Optimizing Startup Programs

While the methods above are effective for managing startup programs in Windows 10/11, there are also other ways to further optimize your startup and improve your system’s performance. Here are a few additional tips:

Disable unnecessary startup programs: Take a closer look at the programs that are set to run at startup and disable any that you don’t need. Some programs, such as antivirus software or cloud storage services, are important to have running at startup. However, others may not be necessary and can be disabled to free up resources and speed up your system’s boot time.

Clean up your system: Regularly cleaning up your system can help improve startup times and overall system performance. Use a disk cleanup tool to delete unnecessary files, clear out temporary files, and remove unused programs. This can help free up resources and reduce the number of programs that need to run at startup.

Upgrade your hardware: If you’re still experiencing slow startup times even after optimizing your startup programs and cleaning up your system, it may be time to upgrade your hardware. Adding more RAM or switching to a faster hard drive or solid-state drive can significantly improve your system’s performance and reduce startup times.

By following these tips and using the methods outlined above, you can effectively manage your startup programs in Windows 10/11 and optimize your system for better performance.

Facebook Gameroom Not Working In Windows 10/11

Facebook Gameroom not working in Windows 10/11 [FULL GUIDE]

276

Share

X

Facebook saw the increasing interest in the gaming section from their users. So they released Facebook Gameroom for Windows to offer them an easier way to install and play games.

Users reported various errors installing or updating the games or the program itself: Usually trying again or reinstalling fixes any issue.

Games that run in the browser can be quite addictive and very popular because they are easy to start and play anywhere. See our Browser Games section for more.

Learn how to fix any issues with similar software by vising the Web Apps Troubleshooting Hub on our site.

Facebook Gameroom is a Windows-native application that lets you experienceand play a variety of both native games and web-based games.

In order to enjoy the gaming experience from the application on Windows, you first have to download it, then access the games on the platform.

Facebook Gameroom promises players an exclusive, and immersive gaming experience, while developers who would want to upload their games on the platform benefit from better app launch timings, memory consumption, and tailored solutions to issues like threading, debugging, and networking.

As always, with every invention, there are bound to be some troubleshooting issues.

Users have noted concerns specific to the application not opening, downloading or installing on their devices.

There’s no need to get worried about the safety of download or installation as the app is whitelisted by most anti-virus programs.

Facebook Gameroom not working: How to fix it

How to troubleshoot Facebook Gameroom install issues

Facebook Gameroom won’t open or load games

What to do if the game download process doesn’t complete

Troubleshoot Facebook Gameroom not installing

If Facebook Gameroom won’t install, here’s what you need to do:

Windows 10 users need not install Microsoft .NET Framework 4 in the event the app won’t install. You need to download the setup files again and run it as administrator.

Note: if you’re using an office PC, check with your network administrator first because some organizations have restrictions against software installs on their computers, so if such a policy exists, you won’t be able to install Facebook Gameroom.

Troubleshoot: Facebook Gameroom won’t open or load games

Sometimes the problem is not the download or installation, but the launching of the application. In the event games do not run on the app, try to download Facebook Gameroom again, then do the following:

Go to Downloaded Games section

Open it again

Expert tip:

Ensure you have installed your graphic cards driver because it enables you to play 3D games such as those on Facebook Gameroom.

Check that you have prerequisites such as DirectX 9.0c installed, and 3D acceleration is enabled under your display settings.

Troubleshoot: Game download doesn’t complete

If the issue isn’t downloading the app, but a game or games, here’s what you can do to resolve it:

Go to Facebook Gameroom home

Look for the game and try to access it again

If this doesn’t resume download, go to Downloaded Games list

Remove the game

Try accessing it again

If none of these resolutions to each troubleshooter works for your PC, try updating your internet browser to the latest version.

Otherwise, you can head over to Facebook Gameroom and drop them a message, or use ‘Report a Problem’ link from your Facebook profile to reach the support team over your issue.

If you want to uninstall Facebook Gameroom altogether, including all its plug-ins, without losing the progress of all your games, do the following:

Select Programs and Features

Locate Facebook Gameroom from the list

Once you select to uninstall Facebook Gameroom, you’ll get a feedback form that launches in your current browser after uninstall is complete, which will request for your feedback about the app.

Was this page helpful?

x

How To Fix Icloud In Windows 10/11 If It’s Not Working

How to fix iCloud in Windows 10/11 if it’s not working

391

Share

X

Access your data without facing any errors or losses

End-to-end encryption of your files and backups

Share your files with non-Sync users

Apple’s iCloud is cloud storage for documents, music, and photos; but it isn’t just limited to iOS and Mac devices. The iCloud for Windows software enables you to save multimedia files and documents to Apple’s cloud storage in Windows 10 and sync them with other devices. However, some might encounter a few issues with iCloud in Windows 10, such as missing media features or photo streams not synching, which can be fixed.

What to do if iCloud won’t work on Windows 10 Fix Missing Media Features

You can’t install and run iCloud for Windows without the Windows Media Player. WMP is one of the programs already included in Windows 10, so you shouldn’t need to install that software unless you’ve removed it. However, Windows 10 KN and N versions don’t come with the WMP. You can add it to those platform versions by pressing the Download button on this page to save the Media Feature Pack to HDD. If you’re sure the Media Player is installed, check that it’s switched on as follows.

Is the Windows Media Player checkbox selected? If not, select it and press OK to close the window.

Restart the OS and add

iCloud

to Windows.

If Windows Media Player

is selected

, you can reinstall it by

deselecting

its checkbox and restarting Windows. Then select the Windows Media Player check box again to switch it back on.

Enable

iCloud

Photos on Windows 10

Are you getting an “

iCloud

Photos is not enabled” error even though you’re signed in to

iCloud

for Windows? If so, you can fix that by selecting the My Photo Stream option in iCloud as follows.

First, open the

iCloud

for Windows software.

Press the Options button for Photos to open further settings.

Select the My Photo Stream option.

You can also press the Change button to choose an alternative default photos

location

in Windows.

Fix

iCloud

Photo Stream not Synching

Select the Processes tab and then search for Apple

Photostreams

Uploader

and Apple

Photostreams

Downloader

processes listed there.

Select the Apple

Photostreams

Uploader

and Apple

Photostreams

processes and press their End task buttons to close them.

Open Run by pressing the Win key + R hotkey

input

‘%

appdata

%’ and press the Enter key.

Reboot or Log out and back into Windows 10.

Now open the

iCloud

control panel again, and double-check the Photos options to

ensure

they’re configured correctly.

Update

iCloud

for Windows

Expert tip:

Enter ‘Apple’ in the 

Cortana

search box and select Apple Software Update to open the window below.

Press the Install 1 item button to update

iCloud

.

Or you could add the latest

iCloud

to Windows 10 by pressing the Download button on this page. Remove the antiquated

iCloud

 software and replace it with the new version.

So those are a few ways to fix iCloud if it’s not working in Windows 10. This Windows Report article also provides further details on how you can set up iCloud for Windows 10.

A lot of issues were resolved over time with a variety of updates. Now, don’t get us wrong, a majority of iCloud users sticks with Apple’s ecosystem. Thus, the technology giant isn’t too keen on solving out all those quirks and issues on Windows most of the time. However, some of them are rather scarce these days, so keep the app up to date and hope for the best.

RELATED STORIES YOU SHOULD CHECK OUT:

Still experiencing issues?

Was this page helpful?

x

Fix Bluetooth Mouse Scroll Not Working On Windows 11/10

If your Bluetooth mouse scroll is not working on your Windows 11/10 computer, this post may help you fix it. A Bluetooth mouse runs on a battery (either chargeable or non-chargeable). So, when a Bluetooth mouse does not work, first, we check whether it is completely charged or not (in case of rechargeable batteries), or if its batteries are drained out or not (in case of non-rechargeable batteries). But according to the users, only the scroll wheel is not working. Therefore, in this case, replacing the batteries does not work here.

Why won’t my Bluetooth mouse scroll?

The problem of malfunctioning of Bluetooth mouse scroll wheel might be occurring due to hardware or software issues. In this article, we have explained some solutions to fix this problem. But before you dive into these troubleshooting methods, we suggest you try the following workouts:

Restart your computer: You might be experiencing the issue due to a minor glitch. In this case, restarting the computer fixes the issue.

Disconnect your Bluetooth mouse and connect it again: Open Windows 11/10 Settings and remove your Bluetooth mouse from there. After that, connect it again and see if it works.

Physically clean your mouse: If dust is accumulated on the scroll wheel, it will not make a proper connection with the integrated circuit inside the mouse. This is the most common cause of malfunctioning of the mouse scroll wheel. In this case, physically cleaning the mouse fixes the problem. Be gentle while cleaning your mouse and make sure you do not damage it.

Fix Bluetooth mouse scroll not working on Windows 11/10

If the Bluetooth mouse scroll is not working on your Windows 11/10 computer, you can try the following solutions in no particular order:

Run the Bluetooth Troubleshooter

Disable Fast Startup

Roll back your Bluetooth mouse driver

Update your Bluetooth mouse driver

Troubleshoot in a Clean Boot state

Let’s see all these fixes in detail.

1] Run the Bluetooth Troubleshooter

Because the problem is occurring on the Bluetooth mouse, running the Bluetooth Troubleshooter may fix it. Troubleshooters are the automated tools developed by Microsoft that help users fix the common issues occurring on their systems.

Windows 11 and Windows 10 have different user interfaces. Therefore, the steps to run Bluetooth Troubleshooter are different for both Windows 11 and Windows 10 users.

Windows 11

You can run Bluetooth Troubleshooter on your Windows 11 computer by following the below instructions:

Windows 10

Windows 10 users have to go through the following steps:

Scroll down and select Bluetooth.

Let the troubleshooter finish its work. You can also try running the Hardware and Devices Troubleshooter.

Now, check whether the scroll button is working or not.

2] Disable Fast Startup

Disabling the Fast Startup has fixed the issue for some users. You can also try this and see if it works for you.

3] Roll back your Bluetooth mouse driver

If you are experiencing the issue after a recent Windows update, you can try rolling back your Bluetooth mouse driver. This may fix the problem. The steps to roll back your Bluetooth mouse driver are written below:

Select the Device Manager from the Search Results.

In the Device Manager, expand the Bluetooth node.

After rolling back your Bluetooth mouse driver, check if the issue persists.

4] Update or reinstall your Bluetooth mouse driver

If rolling back the mouse driver does not work or if Roll back button is grayed out, you can try updating it. You may follow one of the following methods to update your Bluetooth mouse driver:

Use the Windows Optional Update feature to install the latest version of your Bluetooth mouse driver.

You can visit the manufacturer’s website, download the latest version of your Bluetooth driver, and install it manually. Before running the installer file, uninstall the existing diver from the Device Manager.

Update your Bluetooth driver from the Device Manager. The steps for the same are listed below:

Launch the Device Manager.

Expand your Bluetooth node.

Now, check if the issue persists or not.

5] Troubleshoot in a Clean Boot State

By troubleshooting your computer in the Clean Boot state, you will know if there is any third-party application or a startup program causing the problem. Once you find the culprit application or software, consider uninstalling it.

How do I fix auto scroll in Windows 11?

Hope this helps.

Fix: Skype Latest Version Is Not Working On Windows 10/11

Fix: Skype latest version is not working on Windows 10/11

366

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

When someone mentions “VoIP” and “Windows” in the same sentence, you can be almost certain it refers to Skype. Microsoft’s VoIP and messaging application is there for ages and it’ll be there for days to come. However, the imposing of the Skype app (UWP version) for Windows 10 made a lot of folks mad. Namely, this Skype version is lackluster on its own and the frequent updates which “fix one and break three things in the process”.

Users reported a whole palette of emerging issues after an update. Starting with the messaging features and reaching to audio/video issues, failed subscriptions, missing contacts, and overall downgrades in performance. For that purpose, we enlisted the most common solutions which should tackle most of the issues which affect you. Make sure to check them out below.

1: Reset the app

Let’s get one thing out of the table before we move to the troubleshooting steps. The UWP Skype app is, in our humble opinion, a poorly designed and even poorer optimized nonsense. Turning the globally-acclaimed VoIP service into an unreliable instant messenger clone is one of those risky changes basically no one ever wanted. Of course, we refer to its current state. Maybe they make it work eventually, even though it’s there for more than a year. So, make your own conclusions. With that said, let’s start with the troubleshooting.

READ ALSO: 4 best VPN software for Skype to download for free in 2023

After an update rendered your Skype partially or completely unusable, the best bet to resolve it is to reset it to default settings. The pilled up cache can be the cause of the issue at hand. This can be done by following these instructions:

Press Windows key + I to open the Settings app.

Choose Apps.

Under the Apps & features, search for Skype.

Start Skype and sign in again.

2: Run Troubleshooter and sign out/sign in again

Windows 10 brought the unified Troubleshooting menu to ease the problem-addressing procedure for even the inexperienced users. Even though we have our reasons to doubt its functionality and overall success rate when it comes to issue-resolving, you can always give it a try. It’ll take less than a minute and it might help determine the cause of the Skype’s temporary malfunctioning.

Follow these steps to run the dedicated “Windows Store apps” troubleshooter in Windows 10:

In the Windows Search bar, type fix and open Troubleshoot from the list of the results.

Scroll to the bottom and expand Windows Store apps troubleshooter.

Also, we recommend signing out and signing in again. It helped some affected users so it’s worth a shot.

3: Check for possible connection and hardware issues

Now, even though this is rarely the case, the connectivity issues can affect the Skype performance. We’re aware that chances are everything is fine in regards to your bandwidth, but for the sake of meticulous approach, make sure that there are not any connection-related halts.

Expert tip:

Maybe Skype servers are down. Check the dedicated servers status, here.

Restart your router.

Use LAN instead of the Wi-Fi connection.

Disable VPN, proxy or DNS tweaks.

Test your speed and latency.

Disable bandwidth-hogging background applications and look for changes.

4: Update Skype again

Even though minor bugs (those can have a debilitating effect on the Skype performance, as well) are hardly noted, the responsible development team at least deals with the major bugs. Thus, you can expect the patched update to come soon. So, it’s worth checking for a newly appointed update and maybe (big maybe), the problem will be properly addressed.

The updates are mostly automatically distributed but it’s a simple task to check for those on your own. Here’s how to do it:

Open Microsoft Store.

5: Reinstall Skype

Another viable solution for the problem at hand is to reinstall the Skype completely and start from a scratch. The application itself might have been falsely configured and the blank slate is the best way to make it work again. The reinstallation procedure is rather simple and it won’t take you too much time and effort.

READ ALSO: This is why Skype appears offline and what you can do to solve it

Follow these instructions to reinstall Skype on Windows 10:

Press Windows key + I to open the Settings app.

Choose Apps.

Under the Apps & features, search for Skype.

Uninstall Skype.

Restart your PC.

Open Microsoft Store and search for Skype.

Install Skype, sign in, and look for changes.

6: Just stick with the classic Skype for the time being

And, finally, we reached the workaround which should resolve all your problems. The good old classic Skype for desktop is, at the present time, much better choice than the UWP app. It doesn’t look like a flashy contemporary instant messenger, but functionality-wise, it’s as reliable as a Swiss clock.

Have in mind that you can use only one Skype version at a time, so we recommend uninstalling the app and installing the classic Skype for Windows. Here’s how to do it in a few simple steps:

Remove

Skype app from your system and navigate to the

official download site.

Download old, standard desktop version and uninstall the UWP app.

Install it in a standard manner and sign in.

Look for improvements.

RELATED STORIES YOU SHOULD CHECK OUT:

Still experiencing issues?

Was this page helpful?

x

Update the detailed information about Fix: Startup Folder Not Working In Windows 10/11 on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!