Trending February 2024 # Fix – Ssd Full For No Apparent Reason # Suggested March 2024 # Top 3 Popular

You are reading the article Fix – Ssd Full For No Apparent Reason updated in February 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix – Ssd Full For No Apparent Reason

Fix – SSD Full For No Apparent Reason

Windows functioning way too slowly as opposed to the fact that an SSD increases the functionality of your Windows

You get low disk space warning way too many times

Frequent system crashes

You are unable to install applications or any large-sized files

It’s time to take the plunge and much before you trade your existing SSD for a new one, why not try to clean it up a little bit or resolve any issue that’s making it full.

What To Do If An SSD Is Full For No Reason? Get Rid of Large Unwanted Files

If your SSD is full for no reason you may want to remove large unwanted files. These are those files that are of no use (or probably were of some use in the past but not now) and these are taking an enormous amount of space. Here your task is to identify such large files.

Why Should You Use Disk Analyzer Pro For Finding Large Unwanted Files?

To answer this question, let’s see Disk Analyzer Pro in action –

1. Download, install and run Disk Analyzer Pro

Read Complete Review on Disk Analyzer Pro 

2. Select the drive in which you want to find large files

4. Once the scan is over, all files and folders are comprehensively listed as shown in the screenshot below

6. You will now have all the large files and you will also be able to see the amount of space they are occupying

7. You can zero down on the files using several filters as you can see in File Filters in the screenshot below

9. Done and dusted! Now check if you have been able to restore storage space on your SSD, which we bet you would have.

Remove Hiberfil.sys

Hiberfil.sys is one of those files and folders you can safely delete in Windows 10. It is a file that is created by the operating system when your PC goes into hibernation mode. Knowing the fact that it takes almost half of your RAM and in case you are short on hard disk space, you can disable hibernation. Here are the steps for the same.

1. In the Windows search bar, type cmd, and from the right-hand side select Run as administrator

2. When the Command Prompt window opens, type powercfg – h off and press Enter

With the help of this command, Windows will not only disable the hibernation but will also delete the hiberfil.sys file as well. Users have reported that by doing this, they were able to get some free space back on their SSD

Uninstall Unneeded Applications “Completely”

As you can see we’ve put stress on “completely”. The reason is that often despite uninstalling an application, its remnants remain which may consume storage space. And, god forbid, if it’s a malicious application, its remnants can prove to be disastrous. One great way to uninstall applications is to use a third-party uninstaller like IObit Uninstaller.

How would you identify applications that you should remove fast? If your SSD has started getting full fast after you have recently installed an application, that’s our culprit right there. To uninstall such application using IObit Uninstaller –

1. Download and install IObit Uninstaller

4. Hit the bin icon under the Operation section

5. You can even choose to create a restore point and remove any residual files as well

Remove Other Unwanted Files

Unwanted files on your Windows 10 PC could be the cause why your SSD is full for no reason.  Windows 10 has an inbuilt utility that can help you remove unwanted files. It goes by the name Disk Cleanup.

4. Select files you want to delete

Reduce System Storage Utility

System Restore points can prove to be useful as in case of an emergency, they can help your computer get back to a position when it was functioning correctly. The flipside is, System Restore points take up storage space. So, in case your SSD is getting full for no apparent reason, you can try and reduce the size of these restore points. For that –

4. Here you can either turn off or Disable system protection entirely, Delete all restore points while keeping the latest ones, or reduce the storage size allocated to System Restore by dragging the slider next to Max Usage to the left.

Wrapping Up Quick Reaction:

About the author

Sarang Bhargava

You're reading Fix – Ssd Full For No Apparent Reason

Best Ssd For Ps4 Pro

Best SSD For PS4 Pro

In this article, we dive deep into the world of SSDs, in order to help you decide which one is best for you and your PS4 Pro.

01

Best SSD For PS4 Pro

Editors Choice

Samsung T5 Portable SSD

Shop on Amazon

CHECK PRICE

CHECK PRICE

02

Next Best SSD For PS4 Pro

SanDisk 2TB Extreme PRO Portable SSD

Shop on Amazon

CHECK PRICE

03

Another Great SSD For PS4 Pro

WD 2TB Gaming Drive SSD

Shop on Amazon

CHECK PRICE

By far, the easiest way to boost your PS4’s storage is by purchasing an SSD card. Not only will it give your PS4 an additional boost in the overall performance of the system, but it will also be able to take both your internal and external storage to the next level.

Even though your PS4 will come with a certain amount of storage capacity already built-in, purchasing additional storage is a simple yet surefire way to give your PS4 huge leverage in both your console and gaming experience. They’re fast, reliable, and will allow you to keep your games, files, and other information in one place.

Best SSD For PS4 Pro: our top picks

01

Best SSD For PS4 Pro

Editors Choice

Samsung T5 Portable SSD

Shop on Amazon

CHECK PRICE

CHECK PRICE

02

Next Best SSD For PS4 Pro

SanDisk 2TB Extreme PRO Portable SSD

Shop on Amazon

CHECK PRICE

03

Another Great SSD For PS4 Pro

WD 2TB Gaming Drive SSD

Shop on Amazon

CHECK PRICE

But, with so many options available on the market, where do you start? This is where we come in. Here at WePC, we’ve been busy selecting the top 5 SSDs for your PS4 Pro. In addition to that, we have also included a helpful buying guide section to ensure you make the right decision for yourself. Let’s jump straight in!

The Best SSD For PS4 Pro

Samsung T5 Portable SSD

Hard Drive Type

High speed Portable SSD

Speed

N/A

Read/Write Speed

540MB/sec – 520MB/sec

Capacities

256Gb to 2TB

SanDisk 2TB Extreme PRO Portable SSD

Digital Storage Capacity

2 TB

Hardware Interface

USB Type C

Read Speed

2000 Megabytes Per Second

Compatible Devices

Laptop, Desktop

Durability

IP55 and aluminum enclosure

Dust- & Water-resistance

Yes

WD 2TB Gaming Drive SSD

Digital Storage Capacity

2 TB

Hardware Interface

USB 3.0

Compatible Devices

PS4; PC

Memory Storage Capacity

2 GB

Seagate Barracuda Fast SSD 1TB External Solid State Drive Portable

Capacity

1TB

Read

540 Megabytes Per Second

Connection

USB-C USB 3.0

My Passport Ultra Blue Portable External Hard Drive

Digital Storage Capacity

2000 GB

Hardware Interface

USB, USB 3.0

Cache Size

2 TB

Passport Protection

Hardware Encryption

Best SSD For PS4 Pro: Reviews

Best SSD For PS4 Pro

Editors Choice

Samsung T5 Portable SSD

Hard Drive Type

High speed Portable SSD

Speed

N/A

Read/Write Speed

540MB/sec – 520MB/sec

Capacities

256Gb to 2TB

Pros

Portable – the portable design means that it can be used with multiple devices, not just your PS4.

Lightweight – offering total ease of use, this SSD weighs just 1.8oz.

Cons

Higher price point – It might be expensive for some.

If you’re looking for the most portable SSD for your PS4 Pro, then you’ll be making a good choice to consider the Samsung T5 Portable SSD.

Giving you the option to choose between matching your PS4 or going for something a little more playful, this SSD comes in a range of different colors, such as black, blue, gold, and maroon red. Regardless of color, this SSD comes wrapped in an aluminum coating, that will help to ensure it can withstand general wear and tear.

Plus, just like the name suggests, the Samsung T5 Portable SSD offers plenty of portability. It is super compact and light, weighing in at just 1.8oz, and is only 0.41’’ thick. Thanks to this, this SSD is smaller than the average business card and won’t weigh you down, making it an ideal choice for the gamer on the go.

In addition to all of this, the T5 contains no ‘moving’ components, as well as a sturdy metal exterior. Thanks to this, Samsung has ensured that the T5 Portable SSD will be able to withstand being dropped up to 2 meters without any damage and even comes with optional password protection for your peace of mind.

Next Best SSD For PS4 Pro

SanDisk 2TB Extreme PRO Portable SSD

Digital Storage Capacity

2 TB

Hardware Interface

USB Type C

Read Speed

2000 Megabytes Per Second

Compatible Devices

Laptop, Desktop

Durability

IP55 and aluminum enclosure

Dust- & Water-resistance

Yes

Pros

Speedy – offers fast and reliable performance, regardless of workload.

Durable design – made with a rugged design, this SSD can be dropped up to 2 meters without any issues.

Cons

Customer service – some people have complaints about the customer service experience.

If you’d like to get your hands on a speedy SSD suitable for your PS4 Pro, then the SanDisk 2TB Extreme PRO Portable SSD should be on your radar.

The SanDisk 2TB Extreme PRO Portable SSD is one of the best in the industry when it comes to speeding up your overall gaming and console experience. It features a super powerful NVMe solid-state performance that contains 2000MB/s read and write speeds, so you can be confident that this SSD will be able to handle data and store files, games, and other information with ease.

Plus, to ensure durability, the SanDisk 2TB Extreme PRO Portable SSD contains a forged aluminum chassis that will not only help to ensure the SSD can handle a few knocks and bumps but ensure that it stays cooler, allowing for higher consistent speeds. The rugged design also ensures that it will be able to withstand drops up to 2 meters.

In addition, besides speed, this handy SSD comes with a 5-year warranty, while its chassis-silicon shell will help to guarantee a long service life. Armed with this SSD, you’ll also have the option of selecting password protection hardware encryption, to ensure that all of your data is kept safe and confidential.

Another Great SSD For PS4 Pro

WD 2TB Gaming Drive SSD

Digital Storage Capacity

2 TB

Hardware Interface

USB 3.0

Compatible Devices

PS4; PC

Memory Storage Capacity

2 GB

Pros

Budget-friendly – ideal for those looking to save money.

Fast and efficient performance- speedy reading and writing speeds will allow for streamlined performance – both for gaming and console.

Cons

Smaller storage capacity – may not offer a large enough storage size for all.

If you’re a gamer on a budget, then the WD 2TB Gaming Drive SSD is a fantastic choice to consider that won’t break the bank and will allow you to expand your PS4 gaming and console experience.

Boasting a sleek and stylish design, the WD 2TB Gaming Drive SSD will elevate your set-up with an elegant touch, all the while helping to speed up your gaming experience. With a capacity of up to 4TB, the WD Drive will offer you more than enough room to keep all of your games, files, and other data in one place.

The WD 2TB Gaming Drive SSD is also very easy to install, making it an ideal choice for those who want a low-maintenance SSD, or those just starting out. To get it up and running, all you need to do is simply take it out of the box, plug it in and you’ll be ready to start using it. It’s a great choice for those looking for an affordable SSD that won’t compromise on performance.

Seagate Barracuda Fast SSD 1TB External Solid State Drive Portable

Capacity

1TB

Read

540 Megabytes Per Second

Connection

USB-C USB 3.0

Pros

Fast – 540 MB/s ensures smooth and streamlined performance.

Sleek design – its elegant and sleek design will blend itself seamlessly with your PS4 Pro.

Cons

Confusing software – some users have found that the software is a little tricky to get used to.

Our list simply wouldn’t be complete without the Seagate Barracuda Fast SSD, which has become widely known for its speed and reliability.

Ideal for those on the search for an SSD that can offer fast file transfers, the Seagate Barracuda Fast SSD boasts solid-state speeds of up to 540 MB/s, which will not only allow for mega fast file transfers but also help to improve your overall gaming experience.

Allowing for an elevated gaming experience, this SSD will allow you to install and boot your games quicker, with faster load levels and easier graphics rendering. On top of that, this SSD will also allow you to store up to 50+ titles without any issues.

Not only that, but this SSD also features target folders that will allow you to keep your files organized and in one spot. This SSD will also ensure that you are able to keep your files updated using the included backup and folder mirroring software. It’s a great choice for those focused on file-saving.

My Passport Ultra Blue Portable External Hard Drive

Digital Storage Capacity

2000 GB

Hardware Interface

USB, USB 3.0

Cache Size

2 TB

Passport Protection

Hardware Encryption

Pros

Compact and portable – this SSD is versatile and can be used with multiple devices, not just your PS4 Pro.

Fast – thanks to this SSD utilizing the latest USB-C technology, you’ll be able to enjoy a speedy performance.

Cons

Potential hard drive issues – some users have reported that the hard drive needed to be replaced after a few months of purchase.

Last but certainly not least, we have selected the My Passport Ultra Blue Portable External Hard Drive SSD, which will offer a super-fast storage performance for multiple devices.

Featuring the latest USB-C technology, the My Passport Ultra portable drive is able to provide an efficient and lightning-quick storage performance. Thanks to this, it means that this SSD can be used with a variety of different devices, not just your PS4 Pro.

Plus, featuring an innovative design, the My Passport Ultra Blue Portable External Hard Drive comes in an eye-catching blue and silver colorway that will add an elegant and striking touch to your gaming set-up.

On top of that, the Ultra Blue Portable External Hard Drive also comes complete with optional password protection with 256-bit AES hardware encryption, while the included 3-year warranty ensures that your purchase will be protected. All in all, this SSD is a great choice for those who want a fast SSD that can be used with multiple devices, not just your PS4 Pro.

Best SSD For PS4 Pro frequently asked questions

 What is the best SSD for PS4 Pro?

For the best PS4 Pro SSD, we have the Samsung T5 portable, it offers speed and durability. Which can expand your game library while also keeping up the speed. Whilst the SanDisk Extreme Pro portable is another choice of SSD, as well as the WD Gaming Drive. All of which can give you a better experience from your console.

Final Word

So, there we have it! We know how tricky it can be to select an SSD for gaming, especially with all of the variables involved in the selection process. However, after reading our guide, we hope that you now have the perfect SSD in mind, and are ready to take your PS4 gaming experience to the next level.

How To Deal With Wsappx – Reason For High Disk Usage

How To Deal With Wsappx – Reason For High Disk Usage What is Wsappx?

You can see this process by following the path below –

Wsappx consists of two services –

1. AppXSVC (Appx Deployment Service)

This service is responsible for installing, updating and uninstalling Microsoft store apps. It enables Windows 10 PC to automatically update such as email apps or paint.

2. ClipSVC (Client License Service)

In plain and simple terms it is required for providing infrastructural support to the Microsoft store. If it is disabled, the apps that you have installed from the store will not function properly. This is the Windows background process that sees that the apps that you have installed or paid for are licensed.

How to Fix High Disk Usage Issue Caused By Wsappx?

Wsappx does take a considerable toll on CPU and is therefore accountable for high disk usage. Now, you might come to a conclusion that any processes that take a toll on disk usage should be removed without further ado. Wait before you disable wsappx Windows in 10. That’s because the moment you’ll try to get disable wsappx Windows 10 in the task manager, you’ll see a message warning you about the repercussions.

Your system could become unusable or shutdown abruptly. You may even lose some critical data especially if you haven’t saved it.

So, here’s you can deal with it.

Easiest and the best ways to prevent Wsappx from causing high disk usage – 1. Update Drivers On Your Windows 10 PC

High disk usage can be tackled by updating all the faulty drivers.

If you take the manual route, you would first have to identify the drivers and then exhaust a considerable amount of your precious time in searching for vendors by visiting from one website to another.

2. Stop Microsoft From Manually Updating Apps

Follow the steps and prevent Microsoft store from manually preventing apps

1. Launch Microsoft store

3. Disabling Microsoft Store Using Group Policy Editor (gpedit)

Disabling Microsoft store might sound awkward to some, but it may help prevent Wsappx from high disk usage. To disable Microsoft store, follow the steps mentioned below –

1. Open run command by pressing Win + R

2. Type chúng tôi in the search box that appears

7. You will now be required to restart your PC

4. Scan Windows PC for Viruses

One way to prevent Wsappx from causing high disk usage is by checking the Windows PC for viruses. With Windows 10 you can use the inbuilt Windows Defender security/ Windows Security to perform a full-fledged scan. Once the scan reverts with malicious programs, you can uninstall or fix them.

Or, you can choose from amongst some of the best antivirus software available.

And, if you love technology as we do, do subscribe to our Tweaklibrary Blog and visit our YouTube Channel.

Quick Reaction:

About the author

Sarang Bhargava

9 Ways To Fix No Hdmi Signal From Your Device

Whether you’re trying to set up multiple monitors or use an external display for your laptop, the “No HDMI signal” error might pop up. This message could indicate issues with either of your devices (source or destination).

You could also experience it due to incorrect source/projection settings, outdated drivers/firmware, or damaged components. But before diving into the related fixes, we recommend checking the loose connections first and try replugging the HDMI cable.

Adjusting the correct input source is an important thing to consider. If you’ve plugged in your HDMI cable to one port and set the input source to another, your monitor won’t display anything or will likely throw the “No HDMI Signal” error. Here’s a quick workaround to this problem:

Next, find the Input Source option and expand it, as demonstrated below.

If you get the “No HDMI signal” error after connecting your laptop to an external monitor, there may be an issue with the projection setting. 

There are four different options available – PC Screen Only, Duplicate, Extend, and Secondary Screen Only. While the latter three options will cast your laptop content, the first one will not send an HDMI signal to the external display. Here’s a simple guide to changing the projection setting to fix this problem:

Sometimes, the bugs and glitches within your monitor could interfere with the HDMI signals. In such a scenario, performing a power cycle (turning the monitor on and off) will reset the configuration parameters, which might fix the error.

Here’s how you can do this the right way:

Firstly, turn off the monitor using the power button.

Wait for at least two to five minutes before you plug in the power cord.

Now, connect the HDMI cable and check if you still get the “No HDMI signal” error.

Damaged ports and cables could be the other reason you’re facing a signal problem on your device. To identify whether HDMI is working or not, check for bent/broken ports and cables.

You may even plug in another HDMI device on the port to identify if it has some sort of issue. Likewise, you can try a spare cable to find out if the former one was faulty. If you encounter any problems with the HDMI cable, kindly replace it with a new one. 

Well, you may even get a Syncwire HDMI cable for better durability and flawless transmission. Thanks to its metal construction, the cable won’t get damaged even after being bent over 3000 times.

Another method to solve the “No HDMI signal” is to check the issue on another working monitor. This is to identify whether any components of your display device are damaged.

If you do not get any signal, know that there are problems with your PC, cables, and ports. However, if the desired content is displayed on the screen, it’s a clear sign to troubleshoot your monitor or you might even need to replace it!

The display adapters are responsible for sending display images to the monitor or related devices. Any issues with its drivers can directly affect the signals despite the type of monitor connection you’re using.

Likewise, only one display in a multi-monitor setup may show the “No HDMI signal” error. This is probably due to an outdated or corrupted monitor driver.

Lastly, restart your computer. Now, the monitor should detect the HDMI signal.

If the memory module hasn’t been installed properly, your device simply won’t boot. So, there’s a maximum chance that your output device won’t display anything or throw a signal error.

In this case, we recommend reseating the RAM sticks and cleaning the slots well. This ensures no debris or dust is stuck while the memory module is seated. Below is a simple guide that should help you clean and reseat the RAM:

First of all, properly shut down your computer.

Then, unplug all the connectors.

Push the two clips in opposite direction and remove the memory module from its dedicated slot.

Now, clean the slot and the RAM stick using a brush and compressed air.

Finally, turn on the computer and reconnect the HDMI cable. This time, you shouldn’t get the “No HDMI signal” error on your monitor.

Firstly, connect your monitor to a working laptop.

Download and install the required firmware and this should do the trick.

The final option is to perform a factory reset to restore the monitor to its original configuration. This will fix any bugs or glitches that might have interrupted the HDMI signal. For demonstration, we have used the MSI Optix G241V E2 model. But the steps should be similar on other monitors too:

Press the OSD button located on the rear side of the monitor.

Then, navigate to the Settings section.

Select the Reset option.

How To Fix “No Internet, Secured” Message On Windows 10

“No Internet, Secured,” it says. What a weird message. Surely, if you’re not on the Internet, then online security becomes a bit of a moot point, right? The strange thing is that sometimes this message appears and you actually do have Internet access. Whether you continue having Internet or not, it’s a message that shouldn’t be there. So what causes this age-old Windows problem, and how do you solve it?

As usual, there are many possibilities and many solutions, and we go through all the major ones for you here.

Run the Networking Troubleshooter

The quickest fix beyond resetting your router (which is worth mentioning but doesn’t quite deserve its own heading) is to run the Windows 10 troubleshooter for networking.

If yes, great! If not, it’s time to try the next tip.

Tinker in Device Manager

The Windows device manager (best accessed by typing “device manager” into the Start search menu), is where you can update, disable and re-enable, and reinstall your devices, including the network adapter.

You should try the following things in this order:

Update driver.

Disable device, enable “Flight mode” in the taskbar, reboot PC, then “Enable device” and turn off Flight mode.

Uninstall device, reboot PC, reinstall device. (This should happen automatically for the motherboard or integrated adapters. If you’re using a USB adapter, just unplug it and plug it back in to install its drivers.)

Refresh Your IP Configuration

One of the easier solutions for the ambiguous “No Internet, Secured” message is to refresh your IP configuration. This reassigns your IP address, which will fix the problem if it was down to your IP allocation going out of whack.

Open the Command Prompt, then enter the following commands:

ipconfig

/

release ipconfig

/

renew

Once you’ve done these two things, the message will hopefully disappear.

Reset Winsock

There are a couple of other things you can try in the command prompt. The Winsock protocol controls a big chunk of your computer’s communication with network services, and resetting it will reset many of those under-the-hood elements to their default settings.

To reset the Winsock catalog, enter the following into the command prompt:

netsh winsock reset catalog Fix Your Connection’s Properties

In the Properties window, make sure all the following boxes are ticked:

Client for Microsoft Networks

File and Printer Sharing

Internet Protocol Version 4

Internet Protocol Version 6

Link-layer Topology Discovery Responder

Disable iPv6

Yes, we did just tell you to enable IPv6 on your PC, but there can be an exception.

IPv6 is the relatively new Internet protocol that more and more PCs are using due to the fact that the number of available IPv4 addresses is simply running out. Not all networking equipment and ISPs plays nice with iPv6, however, so if you have this switched on, then it could be interfering with your connection. (It’s also possible that you’re connected to the Internet via IPv4, but your PC is essentially letting you know that your IPv6 connection has “No Internet.”)

If you suspect this might be the issue, uncheck the IPv6 box under your connection’s Properties (as accessed through the last tip).

These tips should do it to get that pesky No Internet, Secured message to stop appearing. If you want more help working your way around Windows, then read up on how to find out if someone is logging in to your PC. We also have a handy guide on how to disable auto-refresh on all the big browsers.

Robert Zak

Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

How To Fix “No Audio Output Device Is Installed” Error

The error message “No audio device is installed” indicates the Operating System is having trouble identifying an audio device which results in no audio output from the computer. Due to unknown reasons, the audio output device gets disabled, sometimes even after a major Windows update. If that’s the case for you, we can simply fix the issue by enabling it. 

However, that may not be the only reason the error “No audio device is installed” is displayed. Here in this article, we have listed some other reasons that can cause the error and solutions to fix the issue.

What Causes “No audio output device is installed” Error Message?

Here is a list of reasons the Operating System has issues on detecting the audio output device.

Audio output device disabled

Corrupted driver files

An issue with Windows Update

Outdated driver or Windows

Faulty sound card

Wrong Registry Entries

Now that we know what can stop the OS from detecting an audio output device, let us get right into how we can fix the issue.

Fixing “No audio output device is installed” Error

Before we start, let us see if the computer is detecting the audio drivers. If not, then the issue is most likely with the audio drivers.

Please follow these steps to verify that the installed sound drivers and device is actually recognized.

Press the Windows + R key and type “dxdiag“ and press Enter.

Go to Sound tab. Here, check for Device and Drivers.

If the system recognizes the sound card and driver, its Name, Version or and the Hardware ID will be displayed.

Perform Solution Update/Roll Back Drivers if the system is not detecting the driver.

Here are solutions that you can try to play sound from the computer once again.

Enable Disabled devices

When we update Windows, many settings can get changed due to unknown reasons. Similarly, one of the changes is a disabled audio output device. Once disabled, if the computer is not connected to another audio output device, it cannot produce any sound. 

For Windows 10,

Now, once the Sound Dialog box opens, follow these steps.

Once we enable the speaker, the OS should detect the audio device. 

Run the Audio Troubleshooter

The troubleshooter utility in Windows allows users to pinpoint and fix errors with components like the network adapter, internet, microphone, display, and audio. If enabling the audio device does not work, running the audio troubleshooter can figure out what is causing the issue and suggests possible solutions to fix the problem.

The steps mentioned below will guide you in the troubleshooting process.

For Windows 11, 

For Windows 10, 

Once we run the Troubleshooter follow these steps

The troubleshooter may or may not display the same process as above. The steps that the troubleshooter displays depend on the type of issue you face. Therefore, after step 6, you may not get the same troubleshooting steps.

Scan Hardware Changes

Sometimes, due to unknown reason, the system may have difficulties in detecting audio devices and driver. If this is the case, we can scan the hardware for any changes to bring the driver back and make the device-detectable again.

We can follow these mentioned steps to scan for hardware changes.

Similarly repeat the same steps for Sound, Video, and game controllers and System devices.

Run SFC Command

The SFC or the System File Checker command is responsible for finding and replacing any corrupted or missing system files. As driver files are also system files, any corrupted sound driver files can be fixed using the SFC command.

The following steps will guide you in running the SFC command.

Press the Windows + R key simultaneously to open Run.

Type “cmd” without a quotation mark and press Ctrl + Shift + Enter to open Command Prompt as administrator.

Now type “sfc /scannow” without quotations and press Enter.

Now the command will check for any corrupted system files and fix them. It will take a few minutes to complete this process.

Check for Hardware Issues

If you are on a desktop computer, the port or cable that connects the speaker to the computer may be damaged. Try connecting the speaker to another computer and make sure that the speaker works without any issue. If it works there may be some issue with the ports on the computer.

We can also check for dust settlement on the 3.5mm jack that may be stopping the connection. Also, make sure that the 3.5mm jack is plugged in the right port, i.e., the speaker port. If connected to the microphone port, the computer will not detect the output device. 

Any damage to the Speaker cable can also stop the system from detecting the speaker. So, make sure that there are no visible damages to the cable.

The system will also have an issue detecting the audio output device if we connect the 3.5mm jack to the wrong port. The 3.5mm microphone jack is pretty similar to the 3.5mm speaker jack and it can be mistaken. If so, the system will not detect an audio device.

Also, ensure that the headphone jack is completely inserted onto the port as a loose connection can also cause this issue.

Change Registry Values

Wrong changes in the Registry values can also stop the OS from detecting the audio driver. The Windows Registry contains all the Internal OS settings like registry keys and value data. Therefore, a small change in the registry can cause the “No audio output device installed” error message. 

However, we need to be very careful while changing any values inside the registry, as wrong changes can slow down the OS or even render it useless in some cases. 

Backing up the registry is always recommended before making any changes to it.

Follow these steps to back up the Windows Registry.

Now that we have created a backup. Let’s change the registry values to fix the audio issue.

Open the Registry Editor by following steps 1 and 2 from above.

Navigate to

Now, on the right panel, check the Data column from ConsoleSecurity. If this value is (zero-length binary value), continue with the following steps. However, if the value from ConsoleSecurity in the Data column is a set of two numbers, proceed with another solution.

Close the Registry Editor dialog box and run Command Prompt as administrator.

Enter the following command and press Enter.

Above command will replace previous value from ConsoleSecurity in the Data column to sets of two integer numbers.

Once the process is complete, restart your computer.

Update/Rollback Drivers

The Operating system (OS) to communicate with any devices requires a specific device driver. If this driver is not up-to-date, issues can arise when the OS tries to connect to the device. Therefore, updating sound drivers can fix the problem that we face.

There are multiple audio and speaker drivers, so we will need to update all of them. Here is a list of drivers that we need to update.

All audio drivers inside Sound, video and game controllers

High Definition Audio Controller, located inside System devices

Sometimes, the OS will also face issues while detecting audio drivers when connected to an external monitor through HDMI. Therefore, we may even have to update drivers such as the Display Audio driver (located inside Sound, video and game controller).

If automatically updating the audio drivers does not work, we can also use the audio-chip-manufacturers download center to get the latest driver. Most motherboards use Realtek HD audio drivers. We can use its download center to get the latest driver and install it manually.

For Intel audio drivers are packaged into the graphics driver. Therefore, if you are an Intel user, download the latest graphics driver from Intel’s Official Download Center.

As for AMD, we can download the latest audio driver which is also embedded onto the graphics driver in AMD’s Official Download Center.

However, updating the driver to the latest version may not be best as sometimes, a driver update is also known to bring in some bugs to your system. If that’s the case, we can always roll back a driver update. The following steps will guide you through a driver roll-back process.

If updating and rolling back the driver does not fix the issue with OS not detecting the audio device, we can uninstall all audio drivers and perform a clean install. Uninstalling and reinstalling will replace all driver files, including any corrupted files that were causing the issue.

Update Windows

Microsoft is constantly fixing bugs and problems in their Operating System by constantly providing Windows updates. So, if we have not updated the system and Windows stops detecting any component, it is ideal to Update Windows to the latest versions.

Here are the steps to update Windows.

Note: Installing Windows Update will also update all drivers to the latest version.

Uninstall Windows Update

Although updating Windows to the latest version will solve most issues with it, there are cases where the Windows update itself consists of bugs and errors. Therefore, if the OS stops detecting the audio device after a Windows update, there is a good chance that some bugs in the Windows update are causing this issue.

If that’s the case for you, we can always uninstall recent updates. The following steps will guide you in uninstalling the latest Windows update.

Update the detailed information about Fix – Ssd Full For No Apparent Reason on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!