You are reading the article Fix: “No Dp Signal From Your Device” Error On Dell Monitor updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: “No Dp Signal From Your Device” Error On Dell Monitor
DisplayPort is the new standard to transfer video signals from your PC and other sources to a monitor. With the better bandwidth and color accuracy of DisplayPort, most PCs have started providing the provision to use the DP cables and ports.
However, the use of DisplayPort is not without any faults. The most common issue while connecting the monitor using DisplayPort is the “No DP Signal From Your Device” Error. It means that the monitor is not able to receive video signals from the system while using the DP cable. And it can arise from a few hardware to configuration issues.
The causes for the monitor to show the “No DP Signal From Your Device” error even after it is connected through a DisplayPort interface are as follows:
Cable and Port Issues
Outdated or Corrupted Display Drivers
Incorrect Monitor Settings
Before trying the fixes, you should ensure that the power supply to the system is sufficient. Sometimes, a low voltage supply can prevent the system from booting, causing the monitor to not receive any input signals. You can use a voltage stabilizer or surge protector to run your devices.
If it still shows no signal, let’s move on to solving the issue.
If your monitor is set to receive signals from another source or a different port, then you will see the “No DP Signal” error.
So, you should choose the right source which you want your monitor to display from.
Keep the system and monitor turned on with the DisplayPort connecting them.
Find a menu button on the side or back of the monitor and press it.
Look for a Source or Input menu and select it.
Save the settings.
You should find the content on your screen.
Sometimes the graphics card malfunctions in the middle due to heavy computational load or other issues. As a result, the system could shut down the graphics driver causing the mentioned issue.
In such a case, you can simply press Win + Shift + Ctrl + B to restart the graphics driver. See if the display shows any content through the DP.
Furthermore, it is also possible that the system as a whole may have been faulty due to an unstable power supply or any improper power management setting.
Thus, you should try restarting the PC properly.
First, remove the power cable and other peripherals from the system.
Disconnect the DisplayPort cable and power adapter from the monitor.
Press the power button of the monitor for around 10 seconds.
Keep the setup without connecting anything for a while.
Insert all the cables and turn on the system.
The issue should be resolved now.
The majority of the time, the failure of the DP connection from the system to the monitor is mostly due to faults in cables and the ports. So, let’s move on to resolving the problem by inspecting the ports and cables.
Insert the DisplayPort connector into another port on your monitor properly.
Inspect if the system works by connecting the DisplayPort to another slot on your system.
See whether the cable is connected to the GPU’s DP in the system and not on the motherboard port. Computers with dedicated GPUs may not show any display if the monitor cables do not go through them.
Use the cable on another working PC and see if the contents are displayed on the screen.
You can also use a new DP cable to examine the occurrence of the problem again.
If there is still no signal, then the DisplayPort cable or the ports may be damaged. You should consult a service point to have it repaired.
If you are facing the problem of no DP signal in the external monitor that connects through the DisplayPort, it can be the issue of monitor drivers.
However, before repairing the drivers, you should check if the setting for projecting content to the second monitor is chosen correctly. Press Windows + ‘P’ on your primary monitor and choose Duplicate, Extend, or Second screen only for the project setting. See if the monitor shows the display in any of these settings now.
But, if the problem still persists, you will have to update the monitor drivers.
Press Windows + ‘X’ and select Device Manager from the list.
Similarly, find Display Adapters and update the drivers for the graphics card as well.
See if the issue is resolved now.
As the error is specific to DisplayPort, you can try using other means of transferring video signals, such as VGA, HDMI, DVI, etc.
However, there are cases when the issue is resolved by using the HDMI cable first and then switching to the DisplayPort cable later. This usually helps when you receive the No DP Signal error after the system wakes after the sleep state. The idea is to start the PC using an HDMI cable and then insert the DP to drive the monitor.
Remove the power cable from the system and monitor.
Disconnect the DP cable.
Choose HDMI as the source for the monitor display.
When the content is seen clearly on the screen, connect the DisplayPort connector to the PC.
Remove the HDMI cable and let the DP cable be connected.
The error should be gone now.
You're reading Fix: “No Dp Signal From Your Device” Error On Dell Monitor
Whether you’re trying to set up multiple monitors or use an external display for your laptop, the “No HDMI signal” error might pop up. This message could indicate issues with either of your devices (source or destination).
You could also experience it due to incorrect source/projection settings, outdated drivers/firmware, or damaged components. But before diving into the related fixes, we recommend checking the loose connections first and try replugging the HDMI cable.
Adjusting the correct input source is an important thing to consider. If you’ve plugged in your HDMI cable to one port and set the input source to another, your monitor won’t display anything or will likely throw the “No HDMI Signal” error. Here’s a quick workaround to this problem:
Next, find the Input Source option and expand it, as demonstrated below.
If you get the “No HDMI signal” error after connecting your laptop to an external monitor, there may be an issue with the projection setting.
There are four different options available – PC Screen Only, Duplicate, Extend, and Secondary Screen Only. While the latter three options will cast your laptop content, the first one will not send an HDMI signal to the external display. Here’s a simple guide to changing the projection setting to fix this problem:
Sometimes, the bugs and glitches within your monitor could interfere with the HDMI signals. In such a scenario, performing a power cycle (turning the monitor on and off) will reset the configuration parameters, which might fix the error.
Here’s how you can do this the right way:
Firstly, turn off the monitor using the power button.
Wait for at least two to five minutes before you plug in the power cord.
Now, connect the HDMI cable and check if you still get the “No HDMI signal” error.
Damaged ports and cables could be the other reason you’re facing a signal problem on your device. To identify whether HDMI is working or not, check for bent/broken ports and cables.
You may even plug in another HDMI device on the port to identify if it has some sort of issue. Likewise, you can try a spare cable to find out if the former one was faulty. If you encounter any problems with the HDMI cable, kindly replace it with a new one.
Well, you may even get a Syncwire HDMI cable for better durability and flawless transmission. Thanks to its metal construction, the cable won’t get damaged even after being bent over 3000 times.
Another method to solve the “No HDMI signal” is to check the issue on another working monitor. This is to identify whether any components of your display device are damaged.
If you do not get any signal, know that there are problems with your PC, cables, and ports. However, if the desired content is displayed on the screen, it’s a clear sign to troubleshoot your monitor or you might even need to replace it!
The display adapters are responsible for sending display images to the monitor or related devices. Any issues with its drivers can directly affect the signals despite the type of monitor connection you’re using.
Likewise, only one display in a multi-monitor setup may show the “No HDMI signal” error. This is probably due to an outdated or corrupted monitor driver.
Lastly, restart your computer. Now, the monitor should detect the HDMI signal.
If the memory module hasn’t been installed properly, your device simply won’t boot. So, there’s a maximum chance that your output device won’t display anything or throw a signal error.
In this case, we recommend reseating the RAM sticks and cleaning the slots well. This ensures no debris or dust is stuck while the memory module is seated. Below is a simple guide that should help you clean and reseat the RAM:
First of all, properly shut down your computer.
Then, unplug all the connectors.
Push the two clips in opposite direction and remove the memory module from its dedicated slot.
Now, clean the slot and the RAM stick using a brush and compressed air.
Finally, turn on the computer and reconnect the HDMI cable. This time, you shouldn’t get the “No HDMI signal” error on your monitor.
Firstly, connect your monitor to a working laptop.
Download and install the required firmware and this should do the trick.
The final option is to perform a factory reset to restore the monitor to its original configuration. This will fix any bugs or glitches that might have interrupted the HDMI signal. For demonstration, we have used the MSI Optix G241V E2 model. But the steps should be similar on other monitors too:
Press the OSD button located on the rear side of the monitor.
Then, navigate to the Settings section.
Select the Reset option.
The error message “No audio device is installed” indicates the Operating System is having trouble identifying an audio device which results in no audio output from the computer. Due to unknown reasons, the audio output device gets disabled, sometimes even after a major Windows update. If that’s the case for you, we can simply fix the issue by enabling it.
However, that may not be the only reason the error “No audio device is installed” is displayed. Here in this article, we have listed some other reasons that can cause the error and solutions to fix the issue.What Causes “No audio output device is installed” Error Message?
Here is a list of reasons the Operating System has issues on detecting the audio output device.
Audio output device disabled
Corrupted driver files
An issue with Windows Update
Outdated driver or Windows
Faulty sound card
Wrong Registry Entries
Now that we know what can stop the OS from detecting an audio output device, let us get right into how we can fix the issue.Fixing “No audio output device is installed” Error
Before we start, let us see if the computer is detecting the audio drivers. If not, then the issue is most likely with the audio drivers.
Please follow these steps to verify that the installed sound drivers and device is actually recognized.
Press the Windows + R key and type “dxdiag“ and press Enter.
Go to Sound tab. Here, check for Device and Drivers.
If the system recognizes the sound card and driver, its Name, Version or and the Hardware ID will be displayed.
Perform Solution Update/Roll Back Drivers if the system is not detecting the driver.
Here are solutions that you can try to play sound from the computer once again.Enable Disabled devices
When we update Windows, many settings can get changed due to unknown reasons. Similarly, one of the changes is a disabled audio output device. Once disabled, if the computer is not connected to another audio output device, it cannot produce any sound.
For Windows 10,
Now, once the Sound Dialog box opens, follow these steps.
Once we enable the speaker, the OS should detect the audio device.Run the Audio Troubleshooter
The troubleshooter utility in Windows allows users to pinpoint and fix errors with components like the network adapter, internet, microphone, display, and audio. If enabling the audio device does not work, running the audio troubleshooter can figure out what is causing the issue and suggests possible solutions to fix the problem.
The steps mentioned below will guide you in the troubleshooting process.
For Windows 11,
For Windows 10,
Once we run the Troubleshooter follow these steps
The troubleshooter may or may not display the same process as above. The steps that the troubleshooter displays depend on the type of issue you face. Therefore, after step 6, you may not get the same troubleshooting steps.Scan Hardware Changes
Sometimes, due to unknown reason, the system may have difficulties in detecting audio devices and driver. If this is the case, we can scan the hardware for any changes to bring the driver back and make the device-detectable again.
We can follow these mentioned steps to scan for hardware changes.
Similarly repeat the same steps for Sound, Video, and game controllers and System devices.Run SFC Command
The SFC or the System File Checker command is responsible for finding and replacing any corrupted or missing system files. As driver files are also system files, any corrupted sound driver files can be fixed using the SFC command.
The following steps will guide you in running the SFC command.
Press the Windows + R key simultaneously to open Run.
Type “cmd” without a quotation mark and press Ctrl + Shift + Enter to open Command Prompt as administrator.
Now type “sfc /scannow” without quotations and press Enter.
Now the command will check for any corrupted system files and fix them. It will take a few minutes to complete this process.Check for Hardware Issues
If you are on a desktop computer, the port or cable that connects the speaker to the computer may be damaged. Try connecting the speaker to another computer and make sure that the speaker works without any issue. If it works there may be some issue with the ports on the computer.
We can also check for dust settlement on the 3.5mm jack that may be stopping the connection. Also, make sure that the 3.5mm jack is plugged in the right port, i.e., the speaker port. If connected to the microphone port, the computer will not detect the output device.
Any damage to the Speaker cable can also stop the system from detecting the speaker. So, make sure that there are no visible damages to the cable.
The system will also have an issue detecting the audio output device if we connect the 3.5mm jack to the wrong port. The 3.5mm microphone jack is pretty similar to the 3.5mm speaker jack and it can be mistaken. If so, the system will not detect an audio device.
Also, ensure that the headphone jack is completely inserted onto the port as a loose connection can also cause this issue.Change Registry Values
Wrong changes in the Registry values can also stop the OS from detecting the audio driver. The Windows Registry contains all the Internal OS settings like registry keys and value data. Therefore, a small change in the registry can cause the “No audio output device installed” error message.
However, we need to be very careful while changing any values inside the registry, as wrong changes can slow down the OS or even render it useless in some cases.
Backing up the registry is always recommended before making any changes to it.
Follow these steps to back up the Windows Registry.
Now that we have created a backup. Let’s change the registry values to fix the audio issue.
Open the Registry Editor by following steps 1 and 2 from above.
Now, on the right panel, check the Data column from ConsoleSecurity. If this value is (zero-length binary value), continue with the following steps. However, if the value from ConsoleSecurity in the Data column is a set of two numbers, proceed with another solution.
Close the Registry Editor dialog box and run Command Prompt as administrator.
Enter the following command and press Enter.
Above command will replace previous value from ConsoleSecurity in the Data column to sets of two integer numbers.
Once the process is complete, restart your computer.Update/Rollback Drivers
The Operating system (OS) to communicate with any devices requires a specific device driver. If this driver is not up-to-date, issues can arise when the OS tries to connect to the device. Therefore, updating sound drivers can fix the problem that we face.
There are multiple audio and speaker drivers, so we will need to update all of them. Here is a list of drivers that we need to update.
All audio drivers inside Sound, video and game controllers
High Definition Audio Controller, located inside System devices
Sometimes, the OS will also face issues while detecting audio drivers when connected to an external monitor through HDMI. Therefore, we may even have to update drivers such as the Display Audio driver (located inside Sound, video and game controller).
If automatically updating the audio drivers does not work, we can also use the audio-chip-manufacturers download center to get the latest driver. Most motherboards use Realtek HD audio drivers. We can use its download center to get the latest driver and install it manually.
For Intel audio drivers are packaged into the graphics driver. Therefore, if you are an Intel user, download the latest graphics driver from Intel’s Official Download Center.
As for AMD, we can download the latest audio driver which is also embedded onto the graphics driver in AMD’s Official Download Center.
However, updating the driver to the latest version may not be best as sometimes, a driver update is also known to bring in some bugs to your system. If that’s the case, we can always roll back a driver update. The following steps will guide you through a driver roll-back process.
If updating and rolling back the driver does not fix the issue with OS not detecting the audio device, we can uninstall all audio drivers and perform a clean install. Uninstalling and reinstalling will replace all driver files, including any corrupted files that were causing the issue.Update Windows
Microsoft is constantly fixing bugs and problems in their Operating System by constantly providing Windows updates. So, if we have not updated the system and Windows stops detecting any component, it is ideal to Update Windows to the latest versions.
Here are the steps to update Windows.
Note: Installing Windows Update will also update all drivers to the latest version.Uninstall Windows Update
Although updating Windows to the latest version will solve most issues with it, there are cases where the Windows update itself consists of bugs and errors. Therefore, if the OS stops detecting the audio device after a Windows update, there is a good chance that some bugs in the Windows update are causing this issue.
If that’s the case for you, we can always uninstall recent updates. The following steps will guide you in uninstalling the latest Windows update.
Launching apps on an Android device can be done in multiple ways. You can use the app shortcuts available on your homescreen to launch apps, or you can just open the app drawer to launch an app; both get the job done for you.
While you may be using these ways to fire up apps on your device, there is now a new way for you to access apps. This new way allows you to launch an app from a sidebar.Launching Apps from Sidebar
In order to add a sidebar with the apps to your device, you are going to use an app called Glovebox that is available for free on the Google Play store.
1. Head over to the Google Play store and download and install the Glovebox app on your device. Launch the app after it is installed (yes, please use the app drawer launching method for now and maybe for the last time!).
2. When the app is launched, you will go through a couple of welcome screens showing what the app can do for you. Keep on sliding to the left until it is over.
3. Once you reach the main screen of the app, tap on the “+” (plus) icon in the top-right corner to add a new app to the sidebar.
4. On the screen that follows you should see all the apps that are installed. Select all that you wish to add to the sidebar and tap on the icon appearing in the bottom-right corner to tell the app that you are done.
5. You should see the selected apps appearing on the main screen of the Glovebox app. You can now just pull the slider from the left and you will be able to see the sidebar containing all the apps you have added to it. You can tap on any app and it will launch as it usually would.
6. While the sidebar is a great way to launch apps on your device, it may be an issue for some apps, mostly the games on your device. The app has a blacklist option where you can add the apps for which you do not wish to see in the sidebar.
7. Tap on the “+” (plus) icon to add an app to the blacklist.
8. Select the apps you wish to add to the blacklist. When you are done, tap the icon in the bottom-right corner.
9. You should be able to see the blacklist containing the apps you have selected. These apps will pause Glovebox, and it will not run until you close these apps on your device.
Besides homescreen and app drawer, you now have a third way to launch your apps.Conclusion
If you find launching apps from the homescreen and app drawer to be inconvenient, you can use the above procedure to add a new way of launching apps to your device.
Let us know how it works for you!
Mahesh Makvana is a freelance tech writer who’s written thousands of posts about various tech topics on various sites. He specializes in writing about Windows, Mac, iOS, and Android tech posts. He’s been into the field for last eight years and hasn’t spent a single day without tinkering around his devices.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Some Windows users may encounter the IPv6 Connectivity, No network access error when attempting to connect to a network on Windows 11 or Windows 10 computer. In this post, we identify the potential triggers, as well as provide the most adequate solutions to remediate the issue.Why does IPv6 say No network access?
If you have encountered the IPv6 No internet access problem on your Windows PC, it’s most likely due to you’re using the wrong ethernet driver or it’s out of date or corrupted or damaged. In any case, to resolve the issue, update your ethernet network card drivers. The most likely culprits to this error include-
Incorrect HT Mode settings.
Obsolete network adapter drivers.
Incorrect DNS and IP addresses.
Third-party antivirus software.Fix IPv6 Connectivity, No network access error
If you’re faced with this IPv6 Connectivity, No network access error, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Restart PC and Internet device
Temporarily disable third-party security software (if applicable)
Uninstall VPN client (if applicable)
Run Network Troubleshooter
Release/Renew IP, reset Winsock and flush DNS
Update Network card drivers
Disable IP Helper service
Set Network Adapter to HT mode
Set IP and DNS address to Automatic
Let’s take a look at the description of the process involved concerning each of the listed solutions.
Before you try the solutions below, make sure IPv6 is enabled and also check for updates and install any available bits on your Windows device and see if the error reappears.1] Restart PC and Internet device
Your first line of action in resolving theerror is to restart your PC as well as your internet device (modem/router).2] Temporarily disable third-party security software (if applicable)
This solution requires you to disable, or better still uninstall any third-party security software installed on your Windows 10/11 PC, using the AV dedicated removal tool.3] Uninstall VPN client (if applicable)
If you are actively connecting via a VPN on your Windows PC you may encounter this error. In this case, you can uninstall the VPN software and see if that helps resolve the issue.4] Run Network Troubleshooter
This solution requires you to run the Network Troubleshooter to resolve any network-related issues on your Windows 11/10 computer.5] Release/Renew IP, reset Winsock, and flush DNS
This solution requires you to release and renew IP, reset Winsock, and flush DNS. If this operation fails to resolve the issue, proceed with the next solution.6] Update network card drivers
Obsolete, damaged or corrupted network card drivers can trigger this error. In this case, to rule out this possibility, you can update your network adapter drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the network card hardware manufacturer’s website.7] Disable IP Helper service
This solution requires you to disable the IP Helper service and see if the issue at hand is resolved.8] Set Network Adapter to HT mode
HT mode allows you to specify which modes to support High Throughput (802.11n) and/or Very High Throughput (802.11ac).
This solution requires you to set the network adapter to HT mode on your Windows PC. Here’s how:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.
Select HT mode under Property section.
Exit Network Connections control panel.
Check if you can now connect to the network; otherwise, try the next solution.9] Set IP and DNS address to Automatic
Do the following:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.
In the General tab, make sure the radio button is set to Obtain an IP address automatically and Obtain DNS server address automatically.
Exit Control Panel.
If you’re still unable to connect to the network using the IPv6 protocol, try the next solution.10] Use IPv4
If none of the listed solutions in this post has worked for you, you can use IPv4 since IPv6 is not mainstream anyways. To use IPv4 on your Windows PC, you need to disable IPv6 and then your system will automatically default to IPv4 protocol.
Hope these solutions help you!Is IPv6 faster than IPv4?
Based on tests carried out, IPv4 comes out on top. In theory, that IPv6 could be faster than IPv4 is predicated on the fact that cycles don’t have to be wasted on NAT translations. However, IPv6 also has larger packets, which may make it slower for some use cases – but with time and fine-tuning, IPv6 networks might become the de-facto protocol and will get faster.
Related post: Fix Unable to contact your DHCP Server error on Windows.
As our Android phones continue to play a bigger and bigger role in our work lives, it’s only natural that we’ll want to use them for bigger tasks. Take transferring large files for instance. If you have something on your phone that’s 1GB or even just a hundred megabytes, it’s already too big to email.
There are plenty of workarounds to that problem. We’ll show you a trick and a couple of great apps that will help you send your large files from your Android device.1. EasyJoin
If you’re just looking to share files on your local network, there are several ways you can do so. But the one we most recommend is the lightweight and efficient app EasyJoin.
All the linked devices are neatly listed in the Material-inspired interface, and you can make small tweaks such as changing your visibility to other devices, who you receive messages from, and whether or not you want to receive notifications.
It goes without saying that for local transfers of large files, this is one of the fastest methods available.2. WeTransfer
WeTransfer is the go-to website for anyone who has found themselves in a file-sending rut and just wanted to get things done with minimal hassle. It allows you to send 2GB of a file for free and 20GB if you are on the premium plan.
WeTransfer has an Android version, though if you prefer to save on disk space, you can just use the browser version through your phone. The browser version is actually simpler in some ways, as the app is a bit more fancy and presents your added files in “Boards,” letting you share links as well as directly send files.
Using WeTransfer is very simple. You type in your email address (so the recipient knows who it’s from and so you get a notification when your file is received and opened), type in the recipient’s email, and then add your files.3. Send Anywhere
If you and the recipient are in the same vicinity, then why go through all the hassle of uploading a large file all the way to the Internet only for them to download it again when you can just send it over directly?
No, we’re not talking about Bluetooth (which is slow and only good for small files). We’re talking about Send Anywhere, an app that uses Wi-Fi Direct to beam things directly between devices.
Files (50GB file-size limit) you send are 256-bit encrypted, and you’ll get a key that you need to give to the recipient so that they can receive the file.4. Google Drive
The desktop version of Gmail now has a feature where it integrates with Google Drive, making it capable of sending files as large as 10GB by sending them via your cloud account.
After that, go to the Google Drive app, long-tap the file to bring up the options, then tap the three-dotted menu icon. You can either “Add people” to share the file via Google Drive, or if you want the recipient to get their own copy of it, select “Send a copy,” then choose the file-sending app you want to use. This will import the file directly into that app.Conclusion
Using one or all of the above, all your big file-sending needs on Android should be addressed. The ability to actually send large files through Gmail via Google Drive is particularly handy, and it’s a bit of a mystery why Google hasn’t integrated this feature into the Android version yet. Hopefully, it’s just a matter of time, as it will make the whole process much simpler.
Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Update the detailed information about Fix: “No Dp Signal From Your Device” Error On Dell Monitor on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!