Trending December 2023 # Fix: Icloud Drive Not Showing Files On Mac • Mactips # Suggested January 2024 # Top 19 Popular

You are reading the article Fix: Icloud Drive Not Showing Files On Mac • Mactips updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Icloud Drive Not Showing Files On Mac • Mactips

FIX: iCloud Drive not showing files on Mac

709

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

readers this month.

Protect your Mac on all fronts with unrivalled antivirus technology! Intego is a veteran when it comes to Mac security, bringing you well-researched and tested security features to protect your Mac against malware and cyber threats. Here are the most important features:

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Cloud storage can be incredibly useful, but many users reported that iCloud Drive on Mac isn’t showing all the files. This can be a problem, especially if you use cloud storage frequently, but there’s a way to fix it.

What can I do if iCloud Drive on Mac isn’t showing all files? 1. Change iCloud Drive options

Check Keynote, Numbers, Pages, and Preview.

2. Just wait it out

Many users reported that iCloud Drive isn’t showing all files on Mac simply because the files aren’t synced. It’s worth mentioning that the synchronization process can take hours if you have a large number of files.

The only solution is just to wait for the process to finish. As we mentioned, this can take hours, sometimes even days, so it might be best to leave your Mac running overnight and check if that solves the problem.

3. Use the Terminal

Open the Terminal.

Run the following commands:

killall bird

cd ~/Library/Application Support

rm -rf CloudDocs

3. Restart your Mac.

Once your MacBook boots, the syncing process should start immediately. We have to mention that a syncing process can take a couple of hours, so be patient.

If you want, you can monitor the syncing process by using the brctl log -w command.

4. Change your cloud storage solution

iCloud is the default cloud storage platform for Apple devices but there are plenty of other solutions out there that can offer even better conditions.

For instance, we recommend pCloud, a service that it’s offering storage for both Windows and Mac devices so it’s a lot better if you have gadgets from both worlds at home.

You have two possible options, the Premium storage offers 500 GB and the Premium Plus guarantees 2 TB. Your files will be absolutely safe because each one is stored in 5 copies on different servers.

You can test the platform since pCloud offers trials but it’s also covered by a money-back guarantee policy.

⇒ Get pCloud

FAQ: Learn more about iCloud issues on Mac

Why is my iCloud not connecting to my Mac?

How do I connect iCloud to my Mac?

How do I reset my iCloud on my Mac?

Editor’s Note: This post was originally published in May 2023 and has been since revamped and updated for freshness, accuracy, and comprehensiveness.

Was this page helpful?

You're reading Fix: Icloud Drive Not Showing Files On Mac • Mactips

How To Fix Google Drive Not Syncing On Mac

The Backup and Sync app from Google works just fine to let you sync your local content with your Google Drive account. Occasionally, you might come across errors with this sync process. When the sync issues occur, you can’t sync any of the files from your Mac to your Google Drive account.

There are a few things you can do when Google Drive is not syncing on your Mac. These methods include restarting the sync process, disabling the proxy server, and so on.

Table of Contents

Pause & Restart The Sync

When your files stop syncing with the Backup and Sync app, the first thing to do is to pause and resume the sync process. This refreshes your sync connection and helps fix the issues you’re facing with syncing your files.

Quit The App & Reopen It

Sometimes the app faces some minor glitches which can be resolved by simply closing the app and then reopening it. This is the most basic method you can try and it works in many cases.

Log Out Of The App & Log Back In

If Google Drive is still not syncing on your Mac, you can try logging out and then logging back into the app on your machine. This should give it a fresh start to sync your content.

Select Settings from the left sidebar.

Log back into the app with your account.

Reboot Your Mac

If this is the first time you’re facing an issue with Backup and Sync on your Mac, try rebooting your Mac and see if that fixes the problem for you.

Launch Backup and Sync when your Mac boots-up and let it sync your files.

Turn Off The Firewall On Your Mac

The firewall settings define what connection requests your Mac can send and receive. Since Google Drive sync uses your network connection to transfer files, you need to make sure your firewall isn’t interfering with it.

Keeping the firewall turned off while syncing the files should fix most connection issues.

Select Security & Privacy on the following screen.

Checkmark The Folders That You Want To Sync

If you’re having issues with Google Drive not syncing certain folders on your Mac, make sure those folders are enabled in the Backup and Sync app. The app only syncs the checkmarked folders.

Here’s how you ensure it.

Ensure The App Opens At Login For Automatic Sync

If Backup and Sync doesn’t sync your files automatically, it may be you haven’t set it to automatically launch at boot-up. You can fix it by adding the app to your startup items list.

Run The Script Bundled With “Backup and Sync”

The Backup and Sync app comes with a script and running it sometimes fixes many issues with the app on your Mac. You can access it by revealing the content of the app package.

Open the Contents folder.

Open the MacOS folder.

Disable The Proxy Connection

Proxy connections may sometimes interrupt your sync process. Therefore, keep your proxies disabled while you use the Backup and Sync app to sync your files with your Google Drive account.

Reinstall The “Backup and Sync” App

If Google Drive is still not syncing with your Mac, your final option is to reinstall the Backup and Sync app on your machine. This’ll clear your old configuration and create new settings and account files for you.

Close AppCleaner.

Head over to the Backup and Sync download page, download the app, and install it on your Mac.

Open the app and log-in to your Google account to sync your files.

Mapped Drive Not Showing? Here’s How To Fix It

Mapped Drives are great options to link a folder to a drive or share resources on a domain. However, in some scenarios, they may not show up. Most people have encountered this issue while using Group Policy Preferences or logon scripts to create mapped drives if UAC is enabled.

The reason for the issue is how the UAC treats your Administrators user group. If you use an elevated process to create the drive, your system only makes it available to full admin users. However, when UAC is enabled, your system treats the Admin user as a standard user only, unless you are using an elevated process.

The methods we mentioned earlier all use elevated processes to create the mapped drives, so they don’t show up in your explorer, which you can’t run as admin by default. Similarly, mapped drives you create from non-admin methods don’t show up in elevated processes.

There are also other few possible reasons for mapped drives not showing. In this article, we provide the solutions for all the causes of the issue.

Here are the main reasons for mapped drives not showing on your PC:

Design issue due to UAC providing standard access token instead of an administrator token to unelevated process.

Mapping drive with the same letter as a previous persistent one without removing its residual settings.

Multiple drive mapping policies that conflict with each other.

Policies that delete mapped drives running alongside policies that create them.

Improper Item-level targeting configuration.

SMB protocol disabled on your system.

First, make sure to run gpupdate /force on Command Prompt to force the group policy to apply. You can also run the gpresult /r command to check all active policies.

If you still encounter this issue, you can try out the following solutions:

Sometimes, the mapped drive doesn’t show on your File explorer. It happens in the following conditions:

You created the drive in admin mode, for example using a batch script as admin or using any app with elevated privilege.

You have enabled User Account Control (UAC).

As we mentioned earlier, this happens because UAC handles the Administrators as standard users on unelevated processes. So, you can’t see the mapped drive on File explorer.

You can temporarily resolve this issue by restarting Windows Explorer. To do so,

This method is also useful if you created the mapped drives using a standard access token (not elevated) and want to access it from elevated processes like CMD or some apps. However, keep in mind it can compromise the security of the user computers.

Regardless, here’s what you need to do:

Restart your PC and check if the mapped drives show up.

Another method you can apply is using the logon scripts while also including a postpone script provided by Microsoft.

The script runs a task scheduler after a certain amount of time has passed since the user logged in. The task scheduler runs on elevated mode so it creates the mapped drive for elevated processes.

However, even before the scheduler runs, the logon script is automatically triggered right after logging in which makes the mapped drive available to standard users.

Here’s the complete process for the method:

Open a text editor like notepad. You can enter notepad on Run to open this text editor.

Copy and Paste the following script provided by Microsoft:

‘ This sample launches the application as interactive user. ‘ A constant that specifies a registration trigger. const TriggerTypeRegistration = 7 ‘ A constant that specifies an executable action. const ActionTypeExecutable = 0 ‘ A constant that specifies the flag in RegisterTaskDefinition. const FlagTaskCreate = 2 ‘ A constant that specifies an executable action. const LogonTypeInteractive = 3 WScript.Quit End If strAppPath = WScript.Arguments(0) ‘******************************************************** ‘ Create the TaskService object. ‘******************************************************** Set service = CreateObject(“Schedule.Service”) call service.Connect() strTaskName = “Launch App As Interactive User” ‘******************************************************** ‘ Get a folder to create a task definition in. ‘******************************************************** Dim rootFolder Set rootFolder = service.GetFolder(“”) ‘Delete the task if already present On Error Resume Next call rootFolder.DeleteTask(strTaskName, 0) Err.Clear ‘******************************************************** ‘ Create the new task ‘******************************************************** Dim taskDefinition Set taskDefinition = service.NewTask(0) ‘******************************************************** ‘ Create a registration trigger. ‘******************************************************** Dim triggers Set triggers = taskDefinition.Triggers Dim trigger Set trigger = triggers.Create(TriggerTypeRegistration) ‘*********************************************************** ‘ Create the action for the task to execute. ‘*********************************************************** ‘ Add an action to the task. The action executes the app. Dim Action Set Action = taskDefinition.Actions.Create( ActionTypeExecutable ) Action.Path = strAppPath WScript.Echo “Task definition created. About to submit the task…” ‘*********************************************************** ‘ Register (create) the task. ‘*********************************************************** call rootFolder.RegisterTaskDefinition( _ strTaskName, taskDefinition, FlagTaskCreate, _ ,, LogonTypeInteractive) WScript.Echo “Task submitted.”

net use Z: /delete net use Z: "\serverAny Server"

The mapped drive also doesn’t show if you haven’t properly removed another drive with the same drive letter. It can happen if you persistently reserved the drive letter for one mapped drive and remove it improperly. So its residual settings still remain causing conflicts with the new mapped drive.

There are two ways to resolve this issue. You can either change the mapped drive to a separate drive letter or you can delete the residual settings of the previous mapping.

To change the drive letter,

To delete residual settings,

It is also possible that you created a logon script or policy to delete all mapped drives and forgot. Or you may have created more than one drive mapping policy that are overwriting each other.

So, you should go through all the policies for the GPO and remove such policies. The best way to set a group policy for mapping network drives is to tailor individual policies for separate OUs which combine all the mapped drive policies.

It’s better to use Item-level targetting on the drive mapping to set conditions and improve organization. You can use the AND, OR, IS, and IS NOT operators to set the conditions.

If you set a wrong operator, for instance, using AND instead of OR, the mapped drive won’t be available to all users or all of the mapped drive may not be available.

You need to check your Item-level targeting settings to resolve this issue. To do so,

You can also try creating a new policy, but not on the default domain. You should always create new GPOs and link them to the necessary targets while creating policies. Here’s how you can do so:

You can also try setting automatic DNS if you can’t see a mapped drive linking to a network resource. If the DNS servers or IP configuration of your system conflicts with the source computer, you may nor see the drive.

To do so,

Mapped drives use the Service Message Block (SMB) protocol, which is a network protocol that helps in file sharing. So you need to make sure to enable this protocol to prevent any issues with the mapped drives.

The latest Windows use SMB2 instead of the older SMB 1.0, so you need to check for it. Here’s how you can do so,

However, if you are using any Windows earlier than Windows 10 version 1709 or Windows Server version 1709, you need to enable SMB 1.0. To do so,

It is also possible that some buggy update is causing problems with your mapped drives. Microsoft will surely release the patches for such bugs, so you should install any updates as soon as they are available, especially cumulative updates.

If you started encountering this issue after a certain update and the previous solutions didn’t help, uninstall the latest update to roll back your system.

Adobe Flash Player Not Working On Mac? Here’S How To Fix It • Mactips

Adobe Flash Player not working on Mac? Here’s how to fix it

248

Adobe Flash has reached its end of life, and many users reported that Adobe Flash Player for Mac is not working.

For years Flash was being replaced by newer technologies, such as HTML 5.

Flash is known to have many vulnerabilities, and this is why Adobe decided to discontinue it.

Although Adobe Flash Player for Mac reached its end of life, you can still run it with a special web browser.

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

readers this month.

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Many users reported that Adobe Flash Player is not working on their Mac. This is nothing new because Adobe was planning to pull the plug on Adobe Flash for a while now.

This has finally happened and Adobe Flash is officially discontinued. However, there is a way to play Flash content on your Mac, and today we’re going to show you how.

What can I do if Adobe Flash Player is not working on Mac? Use Opera

Opera also allows you to search easily through open tabs, so it’s perfect for multitasking. Speaking of which, you can easily organize your tabs into workspaces for easier tab management.

The software also has built-in Twitter and Instagram integration, and thanks to the built-in messenger, you can easily chat with your friends at any time.

Opera is optimized for multimedia, and thanks to the video pop-out feature, you can watch videos while working on other tasks.

Lastly, we need to mention that there’s a built-in VPN with unlimited bandwidth, so you can browse the web privately. Opera offers great features, and if you want to enjoy Flash content, be sure to give it a try.

Other great features:

Available on all desktop and mobile platforms

Built-in Chromium engine

Supports Chrome extensions

News feed on the start page

Built-in snapshot tool

Opera

Opera is a free and reliable browser optimized for security and all types of multimedia.

FreeVisit website

Adobe has been planning to discontinue Flash for a while, and on December 31, 2023, Adobe Flash was officially discontinued.

According to Adobe, they have blocked Flash Player from running on January 12, 2023, and while most browsers can’t play Flash content, Opera can still run it according to our reports.

If you still have a Flash website that you want to visit, we encourage you to download Opera for the best Flash experience.

Was this page helpful?

Imessage Not Syncing On Mac? 9 Ways To Fix

Apple syncs messages from your iPhone to Mac (and vice versa) if both devices use the same Apple ID. If you don’t receive iMessages (or text messages) on your Mac, the troubleshooting solutions below should fix the issue.

Your Mac may not synchronize messages and other iCloud data over slow or unstable internet. Ensure your Mac has internet access before attempting to fix iMessage’s synchronization issues.

Table of Contents

1. Check Apple ID and iMessage Server Status

Head to the Apple System Status web page in your web browser and check the indicator next to iMessage and Apple ID.

A green indicator means both services are working correctly, while yellow or red means they’re temporarily unavailable.

Apple ID and iMessage work hand-in-hand—Apple uses your Apple ID to sync messages across your devices. Your Mac may not synchronize messages from your other devices if the iMessage or Apple ID server is down.

Apple fixes server-related issues in time, so messages from your other devices will sync to your Mac when iMessage’s back online.

2. Check Apple ID and iMessage Address

Ensure your Mac uses the same Apple ID account and iMessage address as your other devices.

Open

Messages

, select

Messages

on the menu bar, and select

Preferences

Open the iMessage settings tab and check that the Apple ID is the same one connected to your iCloud devices.

Also, ensure there’s a checkmark next to the iMessage email address or phone number.

Select

Sign Out

if the Apple ID doesn’t match the account on your iPhone or iPad. Your Mac will sync your messages when you sign in to the same Apple ID on your other Apple devices.

3. Check Your Date and Time Settings

Apple may not sync messages to your Mac if its date and time settings don’t match your current location. Connect your Mac to the internet and set the date and time using Apple’s time server.

Open

System Preferences

and select

Date & Time

Head to the “Date & Time” tab and select the

lock icon

in the bottom corner.

Enter your Mac’s password or use Touch ID to unlock the Date & Time preferences page.

Check the

Set date and time automatically

box.

Select the “Time Zone” tab and check

Set time zone automatically using current location

4. Manually Sync Messages

macOS has an option to sync conversations from your iCloud devices to your Mac manually. Initiate a synchronization if your Mac doesn’t update conversations automatically. Connect your Mac to a Wi-Fi network and follow the steps below.

Open the

Messages

app, select

Messages

on the menu bar, and select

Preferences

Head to the

iMessage

tab and select

Sync Now

button.

The synchronization speed depends on your internet connection speed and how many messages your Mac’s synchronizing. Wait 2-5 minutes and check if conversations in the Messages app are up-to-date.

5. Re-Enable Messages in iCloud

Reactivating the messaging service on your Mac can also fix the synchronization issue.

Open

Messages

, select

Messages

on the menu bar, and select

Preferences

Go to the

iMessage

tab and uncheck

Enable Messages in iCloud

Select

Disable This Device

on the confirmation window.

Check the

Enable Messages in iCloud

box.

You should see a “Downloading Messages from iCloud” progress bar at the bottom of the Messages app window. The missing messages or conversations should appear on your Mac when the download is complete.

6. Enable Text Message Forwarding

If you don’t get text messages on your Mac, check that “Text Message Forward” is enabled on your iPhone.

Open your iPhone’s Settings app, tap Messages, select Text Message Forwarding, and turn on text message forwarding for your Mac.

Your devices must use the same Apple ID for text message forwarding to work. If your Mac isn’t on the message forwarding page, link your Mac to your iPhone’s Apple ID and check again.

7. Reboot Your Devices

Shutting down your computer and turning it back can fix synchronization glitches and other Mac issues. Ensure you close all applications before rebooting your Mac, so you don’t lose unsaved data

Select the Apple logo on the menu bar and select Restart on the Apple menu.

8. Disable and Enable iMessage on Your iOS Device

Re-enabling iMessage on your iPhone or iPad can restore message synchronization to your Mac.

Wait for your network carrier to activate iMessage and check if your device now syncs messages to your Mac. Learn what to do if your device gets stuck in the “Waiting for activation” phase.

9. Update Your Devices

Apple often releases iOS and macOS updates introducing new features and fixing issues with Apple apps and services. Update your devices’ operating system to the latest version and check if messages now sync to your Mac.

Your iPhone Could Be the Culprit

If the problem persists, your iPhone or iPad is probably not uploading/syncing your messages to iCloud. Get iMessage working correctly on your iPhone and Apple will sync messages across your devices without issues.

Fix: Iphone Isn’T Configured To Allow Calls Using This Mac • Mactips

FIX: iPhone isn’t configured to allow calls using this Mac

390

Mac has the ability to take calls from your iPhone, but some users are having issues with this feature.

Many users received Your iPhone is not configured to allow calls using this Mac message error.

For more guides like this one, we suggest that you visit our Fix Mac section.

To learn more about Macs, be sure to visit our Mac Hub for more useful information.

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

readers this month.

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Your iPhone and Mac can work together in order to make calls, but many users reported Your iPhone is not configured to allow calls using this Mac message.

This message usually appears if your settings aren’t properly configured, and in today’s article, we’re going to show you how to fix that.

How do I fix the iPhone isn’t configured to allow calls message? 1. Check your network

Make sure that both Mac and iPhone are signed to iCloud with the same Apple ID.

Check if both devices are signed in to FaceTime with the same Apple ID.

Lastly, check if both devices are connected to the same Wi-Fi or Ethernet network.

These are just some simple guidelines, but for in-depth network analysis, we recommend you the Advanced Network Care software.

This great tool can optimize the network card priority, the DNS, and flushes the Ethernet cards cache. It smartly detects all devices running in the Wi-Fi network to avoid Wi-Fi hack and slow speed.

It can also speed up the App Store, iTunes, iCloud to make sure that you will never get Your iPhone is not configured to allow calls using this Mac message.

2. Check your settings

On your iPhone, go to:Settings/Phone/Calls on Other Devices

Enable the Allow Calls on Other Devices option.

On your Mac, open the FaceTime app, and go to: FaceTime/Preferences/Settings

Enable the Calls From iPhone option.

3. Turn off FaceTime, and turn it back on

On iPhone open the Settings app.

Navigate to FaceTime and turn it off.

Wait for a few moments, and turn FaceTime back on.

Now turn on iPhone Cellular Calls.

4. Sign out of iCloud on your Mac

Your iPhone is not configured to allow calls using this Mac message can prevent you from making calls on your Mac, but you should be able to fix it by adjusting your settings.

FAQ: Learn more about iPhone calls on Mac

Why can’t I get FaceTime to work on my Mac?

If FaceTime is stuck or it doesn’t work on your Mac, try signing out of the iCloud account and signing back in.

Can I answer my iPhone on my Mac?

Yes, you can answer calls on your Mac, you just need to configure FaceTime on both your devices.

Can I control my Mac with iPhone?

Yes, you can control your Mac with iPhone remotely as long as you have the right software. You can also turn your iPhone into a computer mouse if needed.

Editor’s Note: This post was originally published in July 2023 and has been since revamped and updated for freshness, accuracy, and comprehensiveness.

Was this page helpful?

Update the detailed information about Fix: Icloud Drive Not Showing Files On Mac • Mactips on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!