You are reading the article Fix: Cannot Ping Computers On The Same Network On Windows 10 updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Cannot Ping Computers On The Same Network On Windows 10
FIX: Cannot Ping Computers on The Same Network on Windows 10 Your antivirus might be blocking the outgoing connections964
Share
X
If you can’t
ping
other computers in your network it’s always a big problem because it’s a sign of a lost connection.
You will also not be able to share
files
in your network but this guide will help you fix the problem.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Being unable to ping other computers in your network can be a big problem for every user that has a home or a business network.
This issue can cause problems while sharing files in your network and other various issues, however, there’s a way to fix this problem.
Many users reported that they are unable to ping other computers. This can be an issue, and speaking of pinging problems, here are some additional problems that users reported:
Windows 10 ping request timed out – Sometimes the ping request will just time out due to your antivirus, so make sure to disable it and try again.
Can’t see my computer, cannot ping a computer on network Windows 10 – This can occur for various reasons, but you can fix them by using the solutions from this article.
Windows 10 cannot ping the local IP address, LAN – This can occur due to the IPv6 feature, so be sure to disable it.
What can I do if I can’t ping other computers in Windows 10? 1. Check your antivirusIf you’re unable to ping other computers in your network, the issue might be your antivirus.
Depending on your antivirus configuration, you might not be able to properly see or ping other PCs in your network.
If that doesn’t work, you might have to disable your antivirus completely. In the worst-case scenario, you might even have to remove your antivirus.
If the antivirus is at blame in this case, the security tool is most likely incompatible with doing such tasks.
If deleting a third-party antivirus solves the problem, you might think about switching to a new antivirus solution.
The efficiency of antivirus software is determined by the unique system settings, which include hardware, installed applications, and online behaviors. The most reliable antivirus is the one that works for you.
2. Disable your VPNMany users use a VPN on their PC in order to protect their privacy.
Although a good VPN is one of the best ways to protect your privacy online, sometimes your VPN can make you unable to ping other computers in your network.
To fix this problem, users are suggesting disabling your VPN and checking if that helps. If disabling the VPN solves your problem, perhaps you should consider switching to a different VPN solution.
When the VPN is connected without specifying the domain, the computer may display strange behavior, such as presenting the available shares but failing to connect.
Expert tip:
For file sharing, it appears that the VPN credentials are used, rather than your credentials currently connected to the other computer.
3. Disable IPv6Note: Keep in mind that you might have to disable IPv6 on other computers in your network in order to fix the problem.
4. Use the netcfg -d command 5. Restart the Function Discovery Provider and Function Discovery HostNote: Keep in mind that you need to apply this solution to all PCs in your network. If you want, you could set these services to start automatically with your PC and the problem should be resolved for good.
6. Make sure that the SMB 1.0/CIFS File Sharing Support is installedNote: You might need to enable this feature on all PCs in your network in order to fix the problem.
7. Be sure that the PC is a member of the same domain 8. Check your network devicesAccording to users, if you’re unable to ping other computers, the issue might be related to your network. To fix the problem, be sure that your PCs are properly connected and able to access the Internet.
In addition, you might want to try restarting your network devices and check if that solves the issue.
In the worst-case scenario, it’s possible that your router is broken. Several users reported that they fixed the problem by replacing the router, so you might want to consider router replacement.
If you’re still unable to ping other computers, the issue might be a glitch on your system. Sometimes bugs and other issues can occur, and the best way to fix them is to keep your system up to date.
Windows 10 keeps itself up to date automatically, but you can always check for updates manually.
After you download the updates, restart your PC in order to install the updates. Once the updates are installed, check if the problem is still there.
Being unable to ping other computers can be a big issue, but we hope that you managed to solve this annoying problem by using the solutions from this article.
Was this page helpful?
x
Start a conversation
You're reading Fix: Cannot Ping Computers On The Same Network On Windows 10
Fix Ipv6 Connectivity, No Network Access Error On Windows 11/10
Some Windows users may encounter the IPv6 Connectivity, No network access error when attempting to connect to a network on Windows 11 or Windows 10 computer. In this post, we identify the potential triggers, as well as provide the most adequate solutions to remediate the issue.
Why does IPv6 say No network access?If you have encountered the IPv6 No internet access problem on your Windows PC, it’s most likely due to you’re using the wrong ethernet driver or it’s out of date or corrupted or damaged. In any case, to resolve the issue, update your ethernet network card drivers. The most likely culprits to this error include-
Incorrect HT Mode settings.
Obsolete network adapter drivers.
Incorrect DNS and IP addresses.
Third-party antivirus software.
Fix IPv6 Connectivity, No network access errorIf you’re faced with this IPv6 Connectivity, No network access error, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Restart PC and Internet device
Temporarily disable third-party security software (if applicable)
Uninstall VPN client (if applicable)
Run Network Troubleshooter
Release/Renew IP, reset Winsock and flush DNS
Update Network card drivers
Disable IP Helper service
Set Network Adapter to HT mode
Set IP and DNS address to Automatic
Use IPv4.
Let’s take a look at the description of the process involved concerning each of the listed solutions.
Before you try the solutions below, make sure IPv6 is enabled and also check for updates and install any available bits on your Windows device and see if the error reappears.
1] Restart PC and Internet deviceYour first line of action in resolving theerror is to restart your PC as well as your internet device (modem/router).
2] Temporarily disable third-party security software (if applicable)This solution requires you to disable, or better still uninstall any third-party security software installed on your Windows 10/11 PC, using the AV dedicated removal tool.
3] Uninstall VPN client (if applicable)If you are actively connecting via a VPN on your Windows PC you may encounter this error. In this case, you can uninstall the VPN software and see if that helps resolve the issue.
4] Run Network TroubleshooterThis solution requires you to run the Network Troubleshooter to resolve any network-related issues on your Windows 11/10 computer.
5] Release/Renew IP, reset Winsock, and flush DNSThis solution requires you to release and renew IP, reset Winsock, and flush DNS. If this operation fails to resolve the issue, proceed with the next solution.
6] Update network card driversObsolete, damaged or corrupted network card drivers can trigger this error. In this case, to rule out this possibility, you can update your network adapter drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the network card hardware manufacturer’s website.
7] Disable IP Helper serviceThis solution requires you to disable the IP Helper service and see if the issue at hand is resolved.
8] Set Network Adapter to HT modeHT mode allows you to specify which modes to support High Throughput (802.11n) and/or Very High Throughput (802.11ac).
This solution requires you to set the network adapter to HT mode on your Windows PC. Here’s how:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.
Select HT mode under Property section.
Exit Network Connections control panel.
Restart PC.
Check if you can now connect to the network; otherwise, try the next solution.
9] Set IP and DNS address to AutomaticDo the following:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, type ncpa.cpl and hit Enter to open Network Connections control panel.
In the General tab, make sure the radio button is set to Obtain an IP address automatically and Obtain DNS server address automatically.
Exit Control Panel.
Restart PC.
If you’re still unable to connect to the network using the IPv6 protocol, try the next solution.
10] Use IPv4If none of the listed solutions in this post has worked for you, you can use IPv4 since IPv6 is not mainstream anyways. To use IPv4 on your Windows PC, you need to disable IPv6 and then your system will automatically default to IPv4 protocol.
Hope these solutions help you!
Is IPv6 faster than IPv4?Based on tests carried out, IPv4 comes out on top. In theory, that IPv6 could be faster than IPv4 is predicated on the fact that cycles don’t have to be wasted on NAT translations. However, IPv6 also has larger packets, which may make it slower for some use cases – but with time and fine-tuning, IPv6 networks might become the de-facto protocol and will get faster.
Related post: Fix Unable to contact your DHCP Server error on Windows.
Gpupdate Force Not Working On Windows Computers
Organizations can set up centralized management and configurations for computers and users in an Active Directory environment using the Windows function known as Group Policy. With this, administrators can easily have central control over a sizable number of users and computers connected to a domain without physically going to each one to make changes or updates. However, in some situations where a local machine doesn’t immediately or rapidly check with and apply the settings provided in the Group Policy Object (GPO), you may use the GPUpdate command to effect the changes.
The update may sometimes fail even after running the GPUpdate command. In this case, you will need to use the GPUpdate Force command to forcefully apply updates to the local machine that is not getting the GPO update automatically. The GPO modifications will be applied, and all user preferences will be overridden with this command, regardless of whether they have previously been cached on the client computer. Some users have reported that the GPUpdate Force is not working on their PC. Fortunately, there are various fixes you may use to resolve the issue, and we’ll go over them in this article.
What causes the GPUpdate Force command not to work?If you’ve been running the gpupdate/force command on your local machine but it is not working, there are several variables that may be causing this, and these includes:
Corrupt user profile
Local machine not connected to the domain
Malware
No Group Policy Object (GPO) to be applied
No privilege to execute the command
Related: Computer policy could not be updated successfully, The processing of Group Policy failed
Fix GPUpdate Force not working on Windows computersBefore you begin, make sure the local machine is actively connected to the network and that you are running the command with admin rights before proceeding if the gpupdate /force command is not functioning properly on your computer. However, if the problem persists even after all of these requirements have been met, you should attempt the following solutions:
Perform DISM and SFC scan
Rename the Group Policy Machine folder
Restart Group Policy Service
Delete & Recreate missing chúng tôi file
Reset Group Policy
Make sure you are using the correct User Profile
Contact Admin
1] Perform DISM and SFC scanSince this issue could have been caused by corrupt or missing system files, you should run the SFC and DISM scans on your computer. This method will assist in system repair, hence resolving GPUpdate Force is not working. Here’s how to perform the scans:
Press Windows + S to open the Windows Search.
Type cmd into the search box and select Run as administrator.
After the Command Prompt opens, type the commands below one by one and hit Enter after typing each of them.
sfc /scannowMake sure you are connected to the internet when you run this command:
DISM /Online /Cleanup-Image /RestoreHealthNow, you should close the Command Prompt and try running the gpupdate/force command to see if the solution worked.
2] Rename the Group Policy Machine folderYour computer has a folder designated for Group Policy that contains the necessary subdirectories for the function’s proper operation. If there is a problem with one of these subdirectories, Group Policy on your local computer will also start to have problems, and this could be the cause of the issue you are presently experiencing. The Machine folder is a common folder that usually causes this issue, and most people who have encountered it have been able to fix it by just renaming it. The steps to follow in order to do this on your local machine are outlined below:
Press Windows + E to open File Explorer on your computer.
Change the folder name to chúng tôi and save it.
Afterward, you can restart your computer and try running the command again.
3] Restart Group Policy ServiceThe Group Policy service on your PC may also be malfunctioning, which would explain why the gpupdate force command is not functioning. Therefore, you should try restarting the service to see if that fixes the problem.
Press Windows + R, type chúng tôi , and hit Enter.
Select Properties on the resulting drop-down menu.
Tap on Start on the same dialogue box, then hit Apply and OK.
4] Delete & Recreate the missing chúng tôi fileAll Group Policy settings are stored in registry.pol file. If this file is missing, any changes pushed to the client will not reflect at all. The good news is that you can recreate it. Just to make sure delete the file, even if it exists.
Navigate to C:WindowsSystem32GroupPolicyMachine.
Check if it has the registry.pol file. Delete it permanently using Shift + Delete.
Now to recreate it, execute the following command to refresh Group Policy settings:
gpupdate /forceSee if this has worked.
Read: How to repair a corrupt Group Policy in Windows
4] Reset Group PolicyPerforming a Group Policy reset on your computer can also be helpful in fixing this issue.
Open the Windows Search and type cmd.
Select Run as administrator under the matching result.
Now type the command below one after the other and press Enter right after each one.
RD /S /Q "%WinDir%System32GroupPolicyUsers" && RD /S /Q "%WinDir%System32GroupPolicy" gpupdate /forceRestart your computer and check.
5] Make sure you are using the correct User ProfileThe gpupdate force command will not function if you are using a user profile other than the one designated for applying GPO settings. As a result, you should check your user profile and ensure that it is configured to receive updates from the network.
6] Contact AdminIn some cases, when the solutions above don’t work, it is best that you contact your IT admin for help, as this may be an issue that can only be resolved from their end.
Read: How to block EXE files from running using Group Policy
How do I run the GPUpdate /force command?To run gpupdate /force command:
Open Windows Search and type cmd.
On the Command Prompt windows, type gpupdate /force and hit Enter.
Does GPUpdate Force require a reboot?The gpupdate force doesn’t actually require a reboot to work. However, in some situations when you have made a change that can only be applied after startup, you may need to reboot your computer for the GPO settings to apply.
Similar: Group Policy keeps reverting on Windows
Can I run GPUpdate Force without admin rights?The gpupdate command, as well as the gpupdate force, can be run on a local computer, hence they don’t necessarily require admin rights. However, in some cases, due to GPO settings, you may not be able to run the command on your local computer, and you will need to contact your admin to force changes.
How long should a GUpdate force take?When you run the GPUpdate /force command, the changes to the Group Policy aren’t implemented right away; instead, they may take up to 2 hours.
Fix: Outlook Error 0X800Ccc13 On Windows 10
FIX: Outlook error 0x800CCC13 on Windows 10
1
Share
X
Outlook is one of the world’s most popular mail clients and PIMs.
Today we will teach you how you can solve an Outlook error 0x800CCC13.
For more articles covering this popular software, check out our dedicated Outlook page.
If you’re looking for info on email clients in general, then go to our Email section instead.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
0
readers this month.
Outlook is a versatile email client that was created by the tech titan, Microsoft. Besides its email service, the application features tools that make it easy for users to create appointments, meetings and execute various other tasks.
Despite being top of the line and reliable, the email application is not invulnerable to errors. Users may come across a common malfunction known as Error 0x800CCC13 Outlook when they are trying to send or receive emails on the Microsoft application.
If you have this issue with Outlook, then the instructions in this article will help you fix the error. Below, you will find information on what causes this error as well as several possible fixes for it.
What causes error 0x800CCC13 in Outlook?Unfortunately, there are several different possible reasons why users get this error on Outlook. Knowing the origins of the issues can significantly help users find a solution to the problem.
1. PST file corrupted
The primary cause of the error 0x800CCC13 Outlook is a corrupted PST file. Outlook will attempt to access this file when you receive messages or send them. So, typically this error occurs when you are handling your emails.
2. Improper termination of the application
Not closing your Outlook application properly can cause damage and corruption to your PST file. For example, if you were using Outlook and your power suddenly cut out, then you may find some corrupted files the next time you log in.
3. Viruses
4. Hard drive issues
It is uncommon, but your hard drive may be physically damaged which will, in turn, corrupt files in your Outlook application. If you have doubts about the structural integrity of your HDD or SDD, then you will want to take your computer to a shop or buy new hard drives.
Quick tip:
Instead of trying to fix Outlook, you should try an alternative email client, like Mailbird.
Expert tip:
Mailbird
Need an alternative to Outlook that is far more stable, less prone to bugs and issues, and has many more features incorporated? Try Mailbird.
Free trial Visit website
How do I fix Outlook error 0x800CCC13?Since multiple factors cause error 0x800CCC13 Outlook, naturally there will also be multiple solutions to fixing the problem. Below, are the most common fixes to this common error.
1. Repair corrupted Outlook filesYou may notice in the section above that most factors causes the files in Outlook to become damaged or corrupted. Therefore, repairing corrupted files of the application will most likely fix the error. Here is how you fix damaged files:
Make sure that the Outlook application is completely closed.
Open Command Prompt (Admin).
Alternatively, if you have Windows Powershell Admin
Remember, to use the application that has admin next to it.
Once you enter the command prompt dialog type in this command: SFC /scannow. Press Enter.
You will need to wait for the process to finish. If you have an SSD, then the process will finish much faster.
After the process is completed, you will need to restart your computer.
Use a third-party email repair tool
A much faster method to repair your corrupted Outlook files is to simply use a dedicated third-party repair tool.
For example, Stellar Repair for Outlook is an excellent tool used for the recovery of all Outlook-related files that have been damaged or corrupted, regardless of the cause.
And the best part is that you don’t need any kind of training orde to use the tool, just knowledge of basic English.
Stellar Repair for Outlook
Recover emails, attachments, contacts, calendars, tasks, notes, and more thanks to this dedicated Outlook repair utility.
Free trial Visit website
2. Create a shortcut and run as administratorOnce the application opens you will need to see if you can send or receive emails without getting the error.
3. Clean boot slate
Press the Windows button and type in MSconfig. Press Enter. If you have Windows 10 your dialog should look like this.
Go to the General tab.
Select the Select startup option.
Uncheck Load startup items and make sure Load system services and Use original boot configuration are checked.
Now, go to the Services tab of the System Configuration dialog.
Restart your computer.
If this solution fixes the problem then you will need to find the program that is wrongfully interfering with Outlook and disable that program.
4. Open Outlook in safe mode
Locate Options on the list.
You should see a section for Add-ins
Try to find the add-in that is causing the issue.
Open the Run dialog by pressing the Windows Key and R at the same time. Once the dialog is opened you will need to type in Outlook /safe.
If opening Outlook in safe mode fixes the error, then you have an add-in causing the issue.
With the details provided, you should be able to remedy the problem. However, if you still receive the error message after these fixes, then you may want to consider reinstalling the Outlook application.
Was this page helpful?
x
Start a conversation
Fix Vpn Error 807 On Windows 11/10
This post features solutions to fix VPN Error 807 on Windows 11/10. A VPN or Virtual Private Network is a mechanism that creates a secure connection between a device and a network or event to networks. But recently, some users have complained about errors while connecting to a VPN network. Fortunately, you can follow these suggestions to fix it.
Error 807: The network connection bewteen your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity.
What is VPN Error 807 in Windows?Error 807 while connecting to a VPN network can occur due to an error within the VPN’s transmission. This can be a result of internet latency indicating that your VPN server has reached its capacity. To fix this, try reconnecting to the VPN server from a different location or contacting the administrator.
Fix VPN Error 807 on Windows 11/10To fix VPN Error 807 on your Windows device, check your VPN settings and disable Windows Defender Firewall temporarily. However, if that doesn’t help, follow these tested fixes:
Run Network Adapter Troubleshooter
Check your Internet Connection
Disable Windows Defender Firewall
Check VPN Settings
Try a Different Server Location
Now let us see these in detail.
1] Run Network Adapter TroubleshooterBefore getting started with different troubleshooting methods to fix this issue, try running Microsoft’s Network Troubleshooters as a first step to diagnose and repair common Network issues. Here’s how:
Press the Windows key + I to open Settings.
2] Check your Internet ConnectionVPN errors can also occur if you have an unstable Internet connection. Perform a speed test to check if anything is wrong with your Internet connection. If the internet speed is less than the plan you opted for, try restarting your router and modem. However, contact your service provider if restarting your router and modem doesn’t work.
3] Disable Windows Defender FirewallWindows Defender Firewall sometimes makes games and apps malfunction. Turn it off and check if it fixes the VPN error 807. Here is how you can do it:
Select Turn Windows Defender Firewall on or off in the left pane.
Now, check the option that says Turn off Windows Defender Firewall under both Private and Public network settings.
4] Check VPN SettingsCheck if all the credentials entered for the VPN network, including the server address, username, and password, are correct. Here is how you can do it:
Press the Windows key + I to open Settings.
Ensure that the connection type to Point to Point Tunneling Protocol (PPTP).
5] Try a Different Server LocationIf none of these suggestions were able to help, try connecting through a different server location. Connect via a different server location and check if the error gets fixed. However, if it still doesn’t help, try using a different VPN client.
I hope this post helps you.
Also read: Common VPN error codes and solutions for Windows
Why is my VPN showing connection error?Your VPN connection can show errors due to various reasons. One of the significant reasons this occurs is connectivity issues. However, it may occur if the VPN server is experiencing a down time or is under maintenance. To fix this, update the VPN software and check if the VPN settings are correct.
How do I fix VPN connection failed?If the VPN connection failed error keeps troubling you, check if your device is connected to a stable internet connection. Next, try connecting via a different server and disable your antivirus/firewall temporarily. However, if that doesn’t work, contact your VPN administrator, who can offer additional support.
Fix Disk Management Errors On Windows 11/10
Disk errors are one of the most common errors on Windows 11/10. It is also scary because all our data are on the disk drives, and even with backup in place, its time consuming to restore all of them. That said, most of these disk errors can be resolved, and this is exactly what we are going to talk about in this post. Check out the best tips for troubleshooting common Disk Management error messages on Windows 11/10.
Fix Disk Management errors on Windows 11/10This post will help you fix Disk Management errors like:
A disk’s status is Not Initialized or the disk is missing,
A basic or dynamic disk’s status is Unreadable,
A dynamic disk’s status is Foreign,
A dynamic disk’s status is Online (Errors),
A dynamic disk’s status is Offline or Missing,
A basic or dynamic volume’s status is Failed,
A basic or dynamic volume’s status is Unknown,
A dynamic volume’s status is Data Incomplete,
A dynamic volume’s status is Healthy (At Risk),
Cannot manage striped volumes using Disk Management or DiskPart,
Disk Management cannot start the Virtual Disk Service.
Before we start, remember two things. First, you need an account with administrator privileges. Second, be very very careful using the disk management tools. One mistake, and you can lose all your data, and there is no way to undo things without losing the data on those drives.
To open Disk Management tool, follow the below steps:
In the Run prompt, type compmgmt.msc, and hit Enter.
This will launch the Computer Management console.
Pre-checks:
I am assuming that your drive is properly connected to the PC, and if it’s an external drive, it is connected properly to the USB port.
Make sure to check this before starting, and always try connecting to another PC to see if it works there.
If the device works on another PC, try running the Disk Error Checker.
A disk’s status is Not Initialized or the disk is missingMany a time your partition or drive does not appear in File Explorer. To check if it’s physically there, open the Disk management. Check if you see it as Not Initialized. If yes, then it simply means that the disk doesn’t have a valid signature, i.e., it’s not properly registered with the system. A disk is registered when you format it at least once. If the disk was available before, then it’s probably corrupted somehow.
If it is a new drive, you can simply initialize it; however, if that’s not the case, we need to try other solutions.
Bring it Online & Add Drive Letter:
Lastly, you can choose to format it in either NTFS or FAT32. If you are using 64bit, make sure to use NTFS. This will remove all the data from your disk.
Check Device Manager for issues.
It is possible that because of driver issues, the hard drive is not working properly. It’s always a good idea to check on the Drive Manager to see that the drive listing has a yellow exclamation mark next to it. If that’s the case:
Similar: All options greyed out in Disk Management.
A basic or dynamic disk’s status is UnreadableIf you are facing this problem, the chances are that your hard drive has experienced a hardware failure or some irreversible corruption. It is also possible that the system’s disk configuration database might be corrupted, and the error message you will get in that case is ‘Unreadable’. You can try it on some other computer, but replacing your hard drive is the only solution here.
Read: SSD not showing up in Disk Management or BIOS in Windows.
A dynamic disk’s status is ForeignWhen you move a dynamic disk from one computer to another, you will get a warning icon next to it with Foreign status. Dynamic disks offer the ability to create fault-tolerant volumes that may even span multiple disks – which Basic disks cannot. When you create a dynamic disk, the configuration disk is stored on all dynamic disks, and the information of who owns is lost when switching between PCs.
Now that you know of Dynamic Disk, here is the list of errors, and their solution around Dynamic Disk.
A dynamic disk’s status is Online (Errors) A dynamic disk’s status is Offline or MissingTo bring a disk that is Offline and is still named Disk # (not Missing) back online:
Try to Reactivate Disk to bring the disk back online
Check-in Event Viewer if you have an error that says “No good config copies”. If yes, the Microsoft Product Support team might help you.
Try connecting to another computer, especially with that which has dynamic disks. If it gets online, import the disk on that computer, and bring it back to the PC on which it wasn’t working.
A basic or dynamic volume’s status is FailedThat said, if the dynamic volume is a mirrored or RAID-5 volume with old data, bringing the underlying disk online will not automatically restart the volume. You will need to bring the other connected disks online first, so it makes sure the data is in sync, and then restarts the mirrored or RAID-5 volume manually, and then run the Error-checking tool or Chkdsk.exe.
A basic or dynamic volume’s status is UnknownIn this state, the boot sector of the volume is corrupted, and the data is no longer available. It is also possible that the new disk setup wasn’t complete. To resolve, you need to Initialize it again.
In Disk Management make sure to check if the status is Online, else you need to bring it online first.
After the wizard completes its job, you should have access to it.
A dynamic volume’s status is Data IncompleteWindows 10 supports multi-disk volume. If you have removed one of the disks and moved it to another computer, it will not work, and will also destroy all the data unless you move and import the remaining disks that contain this volume.
So the solution is to move all the disks which are part of the multi-disk volume to the computer and import it. The disks will be marked as a Foreign disk. We have already stated above on how you can import, and activate those disks.
A dynamic volume’s status is Healthy (At Risk)If one of your dynamic volumes is marked as at Risk, even if they are healthy, it indicates that there are some IO errors on the underlying part. It could be because of the one on the disk, but it makes all the volumes are Risk. One of the disks must have gone offline.
To resolve this, you will need to bring back the disk to Online Status, and it will restore the status, but if that doesn’t work, you will need to replace that disk
Cannot manage striped volumes using Disk Management or DiskPart Disk Management cannot start the Virtual Disk ServiceThis usually appears when the remote computer is blocking the Virtual Disk Service (VDS) because of the Firewall or the remote computer doesn’t support VDS at all. VDS service allows one to remotely connect to another computer Disk Management tool, and then let the admin configure it.
You can either configure Windows Defender Firewall to enable the Remote Volume Management Exception or remote login to that computer and then use Disk Management.
Update the detailed information about Fix: Cannot Ping Computers On The Same Network On Windows 10 on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!