Trending March 2024 # Ethernet Internet Speed Capped At 100 Mbps (Fix) # Suggested April 2024 # Top 6 Popular

You are reading the article Ethernet Internet Speed Capped At 100 Mbps (Fix) updated in March 2024 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Ethernet Internet Speed Capped At 100 Mbps (Fix)

The most common Ethernet internet speeds range from 100 Mbps to 1 Gbps. Despite the promise of Gigabit fiber connection by your ISP, if the requirement network equipment doesn’t support 1.0 Gbps (Gigabit) connection, you may only see a cap of 100 Mbps when you view the Details window of your Ethernet adapter in Windows 11 or Windows 10 or when you test the internet speed.

If your ISP promises you a Gigabit fiber connection (e.g. internet speed of 300 Mbps, 500 Mbps or 1 Gbps), but you still see that your Ethernet speed is capped at 100 Mbps, this guide will show you why and how you can resolve the issue.

Also see: Changing Ethernet Network Speed from 100 Mbps to 1 Gbps

If you have an internet plan that gets you an internet speed of more than 100 Mbps, but you are seeing a cap of 100 Mbps instead of 1 Gbps when you view the Details window of the network adapter in Windows 11 or 10, in most cases, the problem is caused by one of the following reasons.

When it comes to Gigabit Ethernet connection issue, it is almost always the Ethernet cable that is causing the problem. As the speed value is determined by the maximum capabilities of the networking hardware, including the Ethernet LAN cable, you need to use a cable that actually supports 1 Gbps.

For Ethernet connection of 1 Gbps or more, you need to have at least Cat5e cable which can support up to 1 Gbps, or Cat6 which supports up to 10 Gbps.

Defective, old, physically bent or broken LAN cable can cause random connection issues, including a sudden change from 1 Gbps to capping of 100 Mbps. The best way to troubleshoot this problem is to swap the existing Ethernet cable with a new or spare Cat5e or Cat6 cable and see if it the issue can be fixed.

Note that every cable used from your Router to your computer matters. For example, if you are using a Cat6 cable to connect your Router to a Hub, but with a Cat5 cable (or a defective cable) from the hub to your computer, you will see a cap of 100 Mbps Ethernet speed because the entire connection is limited by the maximum capability of the Cat5 cable in the connection.

Read: Ethernet Not Working in Windows 11 (Fix)

Not all Ethernet adapter supports 1 Gbps Ethernet speed. Make sure that you have an Ethernet adapter that is capable of supporting internet speed of 1 Gbps or more. Check your existing Ethernet adapter and see if it is a Gigabit capable Ethernet adapter.

One of the most commonly used Ethernet drivers is the Realtek PCIe GbE Family Controller. If you see this driver description in the Network Connection Details, it means that you have a Gigabit capable Ethernet controller.

The same goes to the Router. Although most modern routers have the capability to support more than 1 Gbps Ethernet connection, some older routers can support only up to 100 Mbps. Some routers claim they can support up to 300 Mbps Ethernet speed but in most cases the port will still be capped at 100 Mbps.

Note that Ethernet is different from that of WiFi. Some routers have Ethernet capabilities of 1 Gbps or more but with a WiFi speed or 300 Mbps or lower. If you also need to have high speed WiFi, you need to look for a router that can support the speed you want.

Related: Windows 11 Ethernet “Unidentified Network” (How to Fix)

Some rare routers may have settings that control the Ethernet speed for each LAN port. Check your router to see if there is any setting that allow you to switch between 1 Gbit/s and 100 MBit/s. If there is, make sure they are set to 1 Gbps instead of 100 Mbps.

There is a setting called Speed and Duplex in Windows 11 or Windows 10 which allow user to configure the Ethernet speed. By default, this setting is and should set as Auto-negotiation. If your networking equipment is set up correctly, auto-negotiation will give you a 1.0 Gbps link speed automatically.

This setting is usually used to address issues where the adapter couldn’t establish the desired link speed with an older switch, or if the switch does not support auto-negotiation. In that case, you can try to manually set the Speed and Duplex setting to match the link partner.

Check if the Speed and Duplex setting is set as Auto-negotiation. If it isn’t, set it to Auto-negotiation and verify if the problem is resolved. Otherwise, change this setting only to match the link partner.

Search for “Device Manager” via Start and open it (Windows 11).

Expand the Network adapters category.

Select Advanced tab and select Speed & Duplex from the Property column.

The last resort would be to call your ISP to confirm that you are getting the internet speed you were promised. Ask them for help if there is any technical issue that cannot be resolved at your end (e.g. damaged fiber optic cable).

You're reading Ethernet Internet Speed Capped At 100 Mbps (Fix)

Windows 11 2023 V22H2 Update Stuck At 0 Or 100 % Downloading

If you are stuck while downloading Windows 11 2023 version 22H2 Feature Update, and the Update does not install, then this post will help resolve the issue. It’s not uncommon to see no change in the progress bar while downloading or installing a feature update in Windows. You could be stuck at 40%, 70%, or even 99% in the worst case. While this can be annoying, you can fix the issue using some troubleshooting tips described in this post.

There could be several factors responsible for Windows 11 Feature Update being stuck at 0 or 100 % downloading. You may be having a slow internet that’s delaying the download, or you may run out of space while in the middle of downloading the update, or maybe some firewall software is blocking the feature update. Whatsoever the reason, you can use the fixes suggested in this post to resolve the issue.

Windows 11 2023 version 22H2 Feature Update Stuck at 0 or 100 % downloading

Connect to a different network, free up disc space, temporarily disable the firewall and see if it helps. If these quick fixes won’t work, the following suggestions help you if Windows 11 2023 version 22H2 Feature Update is stuck at 0 or 100 % downloading:

Run Windows Update Troubleshooter.

Clear Windows Update Cache.

Enable Windows Modules Installer.

Download the update using Windows 11 Installation Assistant.

Use Media Creation Tool to download its ISO.

Exit the installation, restart your computer and router, and then try the following suggestions.

1] Run Windows Update Troubleshooter

Windows Update Troubleshooter is one of the Windows built-in troubleshooters that can help rectify errors while downloading or installing Windows Updates.

2] Clear Windows Update Cache

Clearing the Windows Update cache may help fix update errors in Windows 11/10, where Windows Update is stuck downloading updates.

To clear the Windows Update Cache, you need to stop the Windows Update service, clear the Software Distribution folder and then restart the Windows Update service.

Press Win + R, type chúng tôi and press the Enter key.

Then open File Explorer, go to C:WindowsSoftwareDistributionDownload and press Ctrl + A to select all files and folders.

This action also tries fixing the corrupted files by installing fresh updates.

3] Enable Windows Modules Installer Services

Windows Modules Installer, also known as Windows Modules Installer Worker (WMIW), is a core Microsoft component that automatically checks for necessary updates and installs them on your Windows 11/10 PC. If Windows Modules Installer is disabled, you may face issues with installing updates on your PC.

To see if the service is disabled, open Task Manager and switch to the Services tab.

Now try downloading and installing the update.

4] Download the update using Windows 11 Installation Assistant

Windows 11 Installation Assistant is one of the many ways in which you can install a Windows feature update. If your system isn’t getting the update or is stuck at downloading the update through Windows Update, you may use the Installation Assistant to upgrade.

TIP: This post will help you if the Windows Feature Update is not INSTALLING.

5] Use Media Creation Tool to download its ISO

Use Media Creation Tool to download the ISO and create its Installation Media if the Windows Feature Update is stuck downloading on your system.

How do I fix Windows 11 download stuck at 100?

Downloading stuck at 100% is a common issue with Windows update when nothing happens even after hours of waiting. In most common scenarios, the reason could be an uninterrupted power supply or an unstable internet connection. Other reasons could be insufficient RAM, a corrupt downloaded file, or a firewall software that may be interrupting the installation of Windows update. If the feature update is stuck at 100 % downloading, you can use the fixes suggested in this post to resolve the problem.

Why is Windows update stuck on 100% downloading?

If you’re stuck at downloading Windows 11 feature update, try connecting to a different network or temporarily disabling your firewall software to see if it fixes the issue. If not, you may try other troubleshooting methods, such as running the Windows Update Troubleshooter, enabling Windows Modules Installer, and flushing the Software Distribution folder. You can also run the DISM tool to fix corrupted update system files.

Related:

How To Fix Ethernet Problems After A Recent Mac Security Update

As my colleague Christian reported on Saturday, some Mac models have been plagued by non-working Ethernet ports after installing a new security update outed by Apple. Although a lot of modern Macs don’t even have an Ethernet port, many models still carry it and many people still love using a wired internet connection because it’s faster, more reliable, and more secure than a wireless network.

The security update, known as “031-51913 Incompatible Kernel Extension Configuration Data 3.28.1,” reportedly blacklists the Broadcom BCM5701 driver used by the Ethernet port that comes standard on many Mac machines.

Fortunately, there’s a light at the end of the tunnel for anyone experiencing issues with their Ethernet ports after installing this security update. Apple has issued a support document on Sunday that notes how to fix the problem. In this tutorial, we’ll go over the steps to fix the problem yourself.

How to fix your disabled Ethernet port

Since those of you with a disabled Ethernet port after installing the latest security update will probably want to get it up and running again, Apple has provided a fix for you.

The first thing you need to do is check to see what version of the “Incompatible Kernel Extension Configuration Data” you have installed on your Mac is. Apple says that if you have version 3.28.1 installed, you’ll need to install the updated version, which is 3.28.2, to fix the problem.

There are two ways to do this – 1) connect to a Wi-Fi network to circumvent the Ethernet port altogether so you can install the update that way, or 2) if you rely on Ethernet, and cannot connect to a Wi-Fi network, you’ll have to roll back your most recent update so you can download the latest security update instead.

So with that being said, the first thing you need to do is check to see what version you have. You can do this by:

2) Opening the “Software” section, and opening the “Installations” section.

4) Looking for “Incompatible Kernel Extension Configuration Data” in the list.

If the latest version you see is 3.28.1, then you need to move on to the steps below. On the other hand, if you see version 3.28.2 in your list like you do in the screenshot example below, then you’re already good to go and you have no further actions to take.

How to fix the problem if you CAN connect to Wi-Fi

If you’ve determined that 3.28.1 is the latest version on your system, you can fix the problem by connecting to a Wi-Fi network and downloading the update over the Wi-Fi network instead of via your now-broken Ethernet connection.

Apple notes the following steps to get yourself all up-to-date with this Incompatible Kernel Extension Configuration Data debacle via Wi-Fi:

1) Launch the Terminal app from the Utilities folder found in your Applications folder, or from Spotlight.

2) Copy and paste the following command into Terminal, then press your Return key on your keyboard.

sudo softwareupdate --background

3) Enter your system password when prompted, then press your Return key on your keyboard.

4) Quit the Terminal app and restart your Mac from the  Apple menu in your Menu Bar.

That’s all there is to it. Your Mac should now have the updated Incompatible Kernel Extension Configuration Data and your Ethernet port should be up and running again.

How to fix the problem if you CAN’T connect to Wi-Fi

If you have no Wi-Fi network at home, or your computer is too big and heavy to lug around to someone else’s house to connect to Wi-Fi, then you’ll have to take a different approach. This is because with the latest security update, your wired Ethernet connection isn’t going to let you connect to the internet to check for updates.

If you fall into this category, you’ve got a little more work to do. Fortunately, Apple still has a fix for you, and with a little bit of patience, you can get your Mac connected to the internet again. Just follow these steps:

1) Restart your Mac into Recovery Mode, then move on to step 2. If you’re not sure how to do this, we’ve got a great tutorial on how to restart into Recovery Mode.

2) Once you’re in Recovery Mode, you’ll want to select “Disk Utility” from your OS X utility list.

3) Select your main boot drive from the sidebar  list in the Disk Utility app – by default, it should be Macintosh HD, unless you’ve changed it.

6) Quit the Disk Utility app and launch the Terminal app while still in Recovery Mode.

7) Enter the following command in Terminal, then press the Return Key on your Mac. Enter your password if you’re prompted to.

rm -rf “/Volumes/Macintosh HD/System/Library/Extensions/AppleKextExcludeList.kext”

Note: Replace “Macintosh HD” in the command above with the name of your boot drive if it’s named anything different. The rest of your command will be the same.

8) Quit the Terminal app and restart your Mac from the  Apple menu in the Menu Bar.

9) When your Mac starts back up normally, your Ethernet port should work once again. Now you need to install the latest update that fixes the Ethernet problem and gives your Mac the latest security updates. To do that, Launch the Terminal app on your Mac, enter the following command, and press the Return key on your keyboard.

sudo softwareupdate --background

10) Enter your password when prompted, then press the Return key on your keyboard.

11) Quit the Terminal app and restart your regularly Mac from the  Apple menu in your Menu Bar.

Once your Mac boots back up, you should be up and ready to rock again with not only a working Ethernet port, but also with the latest security updates. Sure, it wasn’t as easy as simply connecting to a Wi-Fi network to fix the problem, but it wasn’t that hard, was it?

Wrapping up

Hopefully you were able to just follow the steps of connecting to a Wi-Fi network, but fortunately Apple had a solution for those that still don’t use Wi-Fi in their homes. After following this tutorial, you should now have a working Ethernet port once more!

Similar tutorials:

Fix Slow Lan Speed On Windows 11/10 Computer

If you are facing slow internet speed on your PC, we have a few solutions to fix slow LAN Ethernet speed on Windows 11 or Windows 10 computers in this guide. These days, slow internet is a nightmare. Our lives are entirely dependent on it. Whether work, entertainment, or classes, it has its uses everywhere. The speed ranges differ with ISPs, and some ISPs give the highest speeds to the end-users. If you are experiencing slow LAN Ethernet speed on your Windows PC, here are some tips to increase your Internet speed.

Why my LAN speed is slow?

Many reasons might have caused the slow LAN speed. It might be due to the following:

Bad internet connection

Faulty cables

A problem with the modem or router

Problem with Internet Service Provider

Slow DNS server

There might be some other reasons for the slow LAN. Mainly the above issues are reasons for the slow LAN in major instances. Let’s see how to fix them.

Fix Slow LAN speed on Windows 11/10 computer

A bad or slow LAN Ethernet speed on Windows 11 or Windows 10 can be fixed in the following ways:

Check the internet connection

Update Network Drivers

Change DNS server

Turn off VPN

Disable Large Send Offload

Change Speed and Duplex Settings

Disable IPv6

Let’s get into the details of each fix.

1] Check the internet connection

When you are experiencing a slow LAN on Windows, you first have to check if the internet is working fine on other devices. Check the speeds on other devices, restart the modem or router, and contact your ISP if you face any issues.

2] Update Network Drivers

An outdated or faulty network driver might also cause slow LAN speeds. You have to update Network drivers and check for Windows OS updates. It might automatically update the drivers to the latest versions, and your slow LAN speed issue will be fixed.

3] Change the DNS server

The Domain Name Server (DNS) on your PC might cause the issue. You have to change the DNS to other public servers like Google Public DNS, Cloudflare, or any other. It might fix the slow LAN speeds if a slow DNS server causes it.

4] Turn off VPN

If you use a VPN on your PC, you must turn it off to use the internet at full speed. Some VPNs have kill switches automatically enabled. It might cause the non-working of the internet on your PC. Please turn it off in the VPN settings.

Read: Increase WiFi Speed Signal strength and coverage area.

5] Disable Large Send Offload

Related: Fix Slow Ethernet speed on Windows.

6] Change Speed and Duplex Settings 7] Disable IPv6

Disabling IPv6 resolves many internet connection issues. It is a standard fix that helped many users. You need to disable IPv6 to increase the LAN speed. Check if it has solved the issue.

If none of the above issues fixed the slow LAN, you might have to contact your Internet service provider.

Related: How to increase upload and download speed in Windows.

How do I fix slow LAN Ethernet?

There are many ways to fix slow LAN Ethernet. You can fix it by changing DNS, disabling Large Send Offload, changing speed/duplex settings, updating network drivers, etc. If you are still experiencing slow speeds, it is possible that your router or modem is outdated and needs to be replaced. You can also try connecting your computer directly to the modem to see if that improves the speed. You may need to contact your ISP for further troubleshooting if you still have issues. You need to find the cause of the issue first and implement the fix that eliminates the cause.

Related read: Fix IPv6 Connectivity, No network access error on Windows.

Fix: Cannot Change Temporary Internet Files Cache Size

Fix: Cannot Change Temporary Internet Files Cache Size Tweak the registry or perform a system restore

680

Share

X

The smaller the temporary internet files’ cache size, the snappier the internet browser will perform.

Several users have reported that they cannot change the temporary internet files’ cache size on their PCs.

You can try deleting the temporary internet files folder inside the drive where you have installed your OS.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

We spend most of our time on the internet, and there are multiple user queries on how they can speed up their internet. Well, Internet Explorer cannot be set to clear the cache automatically, but you can change the size of the cache.

Changing the cache size or making it smaller will make the browser speedier. However, some users have reported that they cannot change the temporary internet file cache size. If you are among such users, then in this guide, we will share some solutions with you that will help you resolve the problem.

How to change the temporary internet files cache size?

Before you get ahead with the solutions that will help you with cannot to change the temporary internet file cache size issue, let us first take a look at the conventional way of changing the temporary internet file size.

What to do if I cannot change the temporary internet files’ cache size? 1. Tweak the Registry

Note that tweaking the registry files wrongly could take things south and even brick your PC. So, it is recommended that you create a backup of the registry before fiddling with it.

You can also check out our guide that will help you with some quick ways to fix the corrupt registry in your Windows 10 PC. In case you forgot to take a registry backup, we would suggest you check out our guide that will help you to restore the registry without any backup.

2. Delete the temporary internet files folder

Log out of your account.

Sign in as an admin to your Windows PC. (Make sure to log in as an admin as you won’t be able to delete the Temporary Internet Files folder if you log in as yourself.)

Open the File Explorer.

Navigate to the below path. %SystemDrive%Users%Username%AppDataLocalMicrosoftWindowsTemporary Internet Files

Open the Temporary Internet Files.

Delete all the files inside the folder.

Restart your PC and check if you can change the temporary internet files’ cache size or not.

The reason why you cannot change the temporary internet files cache size might be that the Temporary Internet Files folder is corrupt.

Expert tip:

3. Perform a System Restore

Do note that system restore process will work only if you have created a system restore point on your PC. If you do not know how to create a restore point, then you should refer to our guide, which will help you with that.

4. Reset your PC

Chances are some of the system files are missing from your PC, or the installation was problematic. In this case, we would suggest you reset your PC, as this would bring your PC back to a fresh state.

Do note that reset your PC only when none of the above solutions helped you resolve the cannot change temporary internet files cache size problem.

That is it from us in this guide. We have a guide to help you quickly clear the cache files on your Windows 11 PC.

You can also check out our guide that lists some solutions to fix the temporary files not deleting automatically using Disk Cleanup.

Still experiencing issues?

Was this page helpful?

x

Start a conversation

10 Tips You Probably Didn’t Know To Keep Windows 8 At Full Speed (Editorial)

Nowadays it’s all about speed, computers have to boot under 10 seconds, apps have to open in a snap of a finger, and web pages are consider slow if they take more than 1.5 seconds to load. There is no doubt that Windows 8 is a very fast operating system, you probably noticed the first time you boot your new or recently upgraded PC.

But didn’t you notice that over time your system gets slow? The simple tasks like booting up, launching an app, or accessing documents take longer than usual. Well, your system is getting slow, but this isn’t completely Windows’ fault, you also play a big roll on your PC slow performance. To turn things around and make Windows 8 faster, below there are ten different tips you probably didn’t know that can really help speed up your computer experience.

Installing Windows 8 from scratch

For those users moving from Windows 7 or XP, or even Vista, to Windows 8, you should consider to perform a clean install of the operating system, instead of using the upgrade path. Although, Windows 8 can do a better job migrating your stuff over, you are always better off starting from scratch. This includes backing up your PC, erasing your hard drive, and installing a fresh copy of Windows 8. If you need help, this guide should help you.

Uninstall applications

Whether you’re using a brand new Windows 8 device or upgraded system, always install the applications you need and use every days. Everything else is just wasting of system resources and space in the hard drive. Take the time and keep your applications to the minimum, go to the Starting screen, do a search for Programs and Features, and start uninstalling the applications you never use.

Here is my warning: Make sure of what you’re uninstalling, don’t make the mistake of removing a piece of software you use quite often just because you didn’t know what it was. If you’re not sure, look up the program name and publisher with your favorite search engine.

Quick Tip: Anything with the publisher name like Microsoft Corporation or a company name for a peripheral you have connected to your PC, you’ll probably need.

Keep connected peripherals to the minimum

Like programs installed in your computer, peripherals, e.g., USB hard drives, cameras, external DVD drives, can cause delay starting your PC or accessing files. For example, even though it is a great and cheap solution, to connect a USB hard drive to expand the available store in a computer. By default many manufactures, even the operating system itself, may be configured with power saving settings, which means that every X amount of time the drive will turn-off, then if you need to retrieve a file or simple access “This PC”, you’ll notice your computer will take longer than usual just because it has to wait for the drive to come back online. So keep external connected devices to the minimum as much as you can and change the drive settings to stay always on (when plugged in, if you are configuring a laptop) — you will see the difference.

Upgrade to SSD

Solid-State Drive, or SSD for short, is one the best investments you can do to speed up your PC and to improve the overall performance of Windows 8 on your older hardware. A difference from traditional hard drives with rotating platters and mechanicals read/write arms, SSDs are much faster, thanks to their flash memory technology. Access to data is immediate and they consume less power because there aren’t any moving parts.

Quick Tip: If you want to keep your PC in good speed, make sure to never fill up your hard drives, keep used space below 70%, beyond this point can start causing your system to be slow. This could be the time to shop for a new drive.

ReadyBoost in Windows 8

If you are unable to upgrade your current computer to a Solid-State Drive, you can still use ReadyBoost. This is a well-known feature in Windows 7 to speed up performance, but because many users are using Windows 8 on new PCs with SSD, the feature got lost. To use Windows 8 ReadyBoost you’ll need a USB flash drive or an SD card equal or greater to the amount of RAM in the PC — You can use this previous Windows guide as reference.

Upgrade system RAM

The next step would be upgrading your system memory (RAM). This is one of those things, when the bigger the number the better. Check your computer’s manufacturer website and figure out if your computer model has available slots to add more memory. If it doesn’t, you can replace those memory sticks with new ones with better speed and greater capacity.

Quick Tip: For the 32-bit version of Windows 8 you should be using at least 4GB RAM (3.5GB still OK) for a good experience. For the 64-bit 4GB of RAM is the minimum, but 6GB or 8GB, depending on the amount of supported memory on your PC, will be best.

Defragmentation

This is a method use in traditional hard drives, which basically reorganize all the bits in the drive for faster access to data. By default Windows 8 is scheduled to optimize drives weekly, but you can override to daily or monthly.

Keep in mind that Solid-State Drives don’t need to be defragmented, but from time-to-time they need to be “trimmed”, which in short is a mechanism that tell the operating system which blocks are no longer filled with unusable data and are ready to be wiped out.

Windows 8 updates

Windows updates are very important, not only to patch vulnerabilities, but also to improve system performance. Windows 8, unlike previous version of the operating system, will have many major updates that will include not only patches, but also performance improvements and new features like in the case of Windows 8.1. This is an update which feels more like an upgrade but it will include many new features that make the OS more productive and fixes many shortcomings, like the return of the Start button and the boot-to-desktop option, among hundreds of new changes.

Also, you should check regularly with your PC manufacturer for drivers update, sometimes they can be the cause of many problems related to system slowness.

Keeping your PC clean

By keeping the PC clean, I mean literally that, I see a lot of people using laptops and even desktops as bookshelves, air vents blocked by even more books, coffee mugs, or papers. This is not good, blocking the computer’s air circulation will not only cause overheat, but it will also slow down your system and it could also cause hardware failure.

So, this could be a good time to clean your desk and make sure that nothing is blocking the computer’s vents — also don’t forget to clear the dust off the vents, this is also a big factor for overheating –.

Here is a well-detailed guide from HP Customer Support that goes step-by-step (video included) on how to clean dust out of your laptop.

Don’t shut down

A few other things that can help you to keep Windows 8 at full speed, is to not shut down your PC every day. We’re are on times where devices can practically be online all the time. What you can do is to put your computer into a lower power state, putting your PC to sleep is an example. If your Windows PC is one of those that keeps the power light blinking all the time, you can opt to use the hibernate state, which is like shutting the system off, but when it resumes you can keep working where you left off. But of course at the first sign of trouble, or when there are new updates available, hit the restart button.

Quick Tip: Windows 8 by default does not show the Hibernate option, but you can easily enable this option by using

Windows 8 by default does not show the Hibernate option, but you can easily enable this option by using this guide

Wrapping up

In this Windows guide you were presented with ten ways to speed up Windows 8, but most of them can also apply for computers with previous versions of the operating system. Also keep in mind that what you’re learning today doesn’t focus on power consumption, instead it is focus on finding the way to make your system as fast as possible with your current hardware and by just adding relatively simple upgrades.

Update the detailed information about Ethernet Internet Speed Capped At 100 Mbps (Fix) on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!