You are reading the article Desktop Dan Aio Seri Hp Elite updated in December 2023 on the website Katfastfood.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Desktop Dan Aio Seri Hp Elite
*Upgrade ke Windows 11 akan tersedia pada perangkat yang memenuhi syarat pada akhir 2023 hingga 2023. Waktu upgrade berbeda-beda sesuai perangkatnya. Fitur tertentu memerlukan perangkat keras khusus (lihat aka.ms/windows11-spec.).
HP Presence memerlukan aplikasi myHP dan OS Windows.
Fitur opsional yang harus dikonfigurasikan saat pembelian. Kualitas 16 MP melalui penggabungan piksel.
Memerlukan aplikasi myHP dan OS Windows.
HP Dynamic Voice Leveling akan berfungsi dalam jarak 3 meter dari PC.
Dijual terpisah, atau sebagai fitur opsional yang harus dikonfigurasi saat pembelian.
Multi-Core didesain untuk meningkatkan kinerja produk perangkat lunak tertentu. Tidak semua pelanggan atau aplikasi perangkat lunak akan mendapat manfaat langsung dari penggunaan teknologi ini. Kinerja dan frekuensi clock bisa berbeda-beda, tergantung beban kerja aplikasi serta konfigurasi perangkat keras dan perangkat lunak Anda. Penomoran Intel bukanlah ukuran kecepatan clock.
Multi-Core didesain untuk meningkatkan kinerja produk perangkat lunak tertentu. Tidak semua pelanggan atau aplikasi perangkat lunak akan mendapat manfaat langsung dari penggunaan teknologi ini. Kinerja dan frekuensi clock bisa berbeda-beda, tergantung beban kerja aplikasi serta konfigurasi perangkat keras dan perangkat lunak Anda. Penomoran AMD bukanlah tolok ukur kecepatan clock.
Konten VR memerlukan kartu grafis NVIDIA®️ GeForce®️ RTX 3070 opsional.
HP Wolf Security for Business memerlukan Windows 10 atau yang lebih baru, menyertakan berbagai fitur keamanan HP serta tersedia di produk HP Pro, Elite, Workstation, dan RPOS. Lihat detail produk untuk mengetahui fitur keamanan yang disertakan dan persyaratan OS.
HP Sure Start Gen7 tersedia pada PC HP tertentu dan memerlukan Windows 10 dan yang lebih tinggi.
Dijual terpisah atau sebagai fitur opsional. Akan dapat mengonfigurasi hingga 4, 7, atau 8 layar, opsi video I/O Flex juga diperlukan.
Berdasarkan pengujian internal produk dengan dan tanpa HP Extended Range Wireless LAN.
Pengujian Proses Uji Total HP bukanlah jaminan performa di masa mendatang menurut kondisi pengujian ini. Kerusakan apa pun yang tidak disengaja memerlukan HP Accidental Damage Protection Care Pack opsional.
Pengujian MIL STD 810 ditunda dan tidak dimaksudkan untuk menunjukkan kesesuaian dengan persyaratan kontrak Departemen Pertahanan AS atau untuk penggunaan dalam militer. Hasil pengujian bukanlah jaminan kinerja pada masa mendatang menurut ketentuan pengujian ini. Kerusakan apa pun yang tidak disengaja memerlukan HP Accidental Damage Protection Care Pack opsional.
HP Sure Sense tersedia di PC HP tertentu dan tidak tersedia dalam Windows10 Home.
Komponen penutup pengeras suara PC terbuat dari 5% bahan plastik daur ulang yang menumpuk di lautan.
Kami memungkinkan hasil pembelajaran yang lebih baik dengan mendukung edukasi melalui penyediaan solusi dan program literasi digital dan pembelajaran.
Program kami bertujuan untuk mempercepat kesetaraan digital dengan menyediakan akses ke setidaknya satu dari yang berikut: perangkat keras, konektivitas, konten, atau literasi digital.
Gambar produk merupakan ilustrasi, ketersediaan produk dan warna kemungkinan berbeda dimasing-masing negara.
Informasi yang terdapat dalam dokumen ini dapat berubah tanpa pemberitahuan sebelumnya. Satu-satunya jaminan untuk produk dan layanan HP dijelaskan dalam pernyataan jaminan yang dinyatakan secara tegas dan disertakan bersama produk dan layanan tersebut. Tidak ada ketentuan dalam dokumen ini yang dapat ditafsirkan sebagai pernyataan jaminan tambahan. HP tidak bertanggung jawab atas kesalahan atau kelalaian teknis maupun editorial dalam dokumen ini.
AMD dan Radeon adalah merek dagang Advanced Micro Devices, Inc. Chrome OS dan Chromium adalah merek dagang terdaftar di Google LLC.
You're reading Desktop Dan Aio Seri Hp Elite
HP’s Envy 17 is a robust, media-centric desktop replacement that’s svelte enough to lug around if you need a large screen on the go.
HP’s design philosophy when it comes to the Envy series of laptops is to borrow liberally from Apple’s Macbook line, then add some of its own flavor. The Envy 17 is no exception. At less than 8 pounds without the power brick, the Envy 17 is barely thicker than an inch and includes robust media playback capabilities–including Blu-ray movies.
At one point, I fired up the HP Support Assistant. My past experiences with HP’s efforts to automate support have been less than stellar, but this time around, it detected a BIOS update, a number of drivers and other HP software updates; installed them; and rebooted cleanly. The whole process was simpler and more straightforward than Microsoft’s Windows Update scheme.
It’s worth talking about the audio for a moment. Most laptop speaker setups are, simply put, terrible. The Envy 17’s speakers actually sound pretty decent. While voices were just a touch nasal, the overall tonal balance proved easy on the ears. Music sounded good, as did movies. Overall, it’s probably the second best audio we’ve heard on a laptop (only the audio on a recent Toshiba unit with 50mm Harmon Kardon drivers was a tad better.) If I have any complaints, it’s with the lack of bass (which is no surprise with a laptop) and the relative lack of volume with everything cranked up.
Headphone audio also sounded very good, and HP’s software gives you control over the overall audio experience with a graphics equalizer. The integrated iDT audio codec delivered clean, distortion-free audio.
Display image quality was also robust. After getting past my initial dislike of the glossy screen (I hate all glossy screens), the overall color balance in movies and games turned out to be quite pleasing. Also pleasantly surprising was the viewing angles. No laptop LCD offers truly wide viewing angles, but the Envy 17’s were better than most–even vertical shifts didn’t result in complete intensity falloff, as I’ve seen with many other units.
Optical discs slide into the right-side mounted Blu-ray ROM/DVD burner. Also on the right side are two USB 2.0 ports, the 5-in-1 flash memory card reader and the power connector. The left side offers up a single USB 3.0 port and a shared USB/eSATA port, and not one, but two digital video outputs–a mini-DisplayPort connector and one for HDMI. Without needing a docking station, you could have access to a triple display setup–two external monitors and the 17-inch, 1080p Envy 17 screen. One of the monitors would have to have a DisplayPort connector, however. Using the VGA output together with the two digital outputs, you can even hook up three external monitors at once, albeit without using the laptop’s display.
Performance in desktop apps seems only average in a unit of this class, with a WorldBench score of 86. Games fared pretty well. Far Cry 2 delivered 42 frames per second in DX10 mode, optimal settings, at full 1080p resolution. And the laptop delivered almost 27 frames per second in the demanding Just Cause 2 “Concrete Jungle” benchmark test. You’ll likely have to dial down graphics settings a notch, but you should see relatively robust frame rates while maintaining good image quality.
Overall, the Envy 17 looks to be an elegant, relatively compact laptop (as desktop replacement systems go) for digital photographers, music buffs, video enthusiasts, and gamers. Just make sure you keep it cool!
Active Noise Cancelling headphones can be pretty amazing, or pretty terrible, depending on how well they actually cancel noise in real-world situations, so when Jabra sent over their Elite 85h Active Noise Cancelling Bluetooth headphones (Rs. 28,999) over to us, I tested them the way I would test any pair of ANC Bluetooth headphones — while travelling. I’ve used these headphones for a considerable amount of time over the last two weeks, and I’m pretty impressed with them, so why did I put “Almost the Best” in the title? Well, read on to get a detailed look into the Jabra Elite 85h Headphones — their ups and downs, pros and cons, and more.Jabra Elite 85h: Specifications
One of the best things about Jabra’s website is the fact that they give proper specifications for their headphones, as compared to a lot of other brands that simply mention “battery life” and “Bluetooth version”.
Dimensions195 x 82 x 225 mm
Ports and I/OUSB-C; 3.5mm AUX
Up to 36 hours (with ANC)
Number of Microphones8 (4 used for ANC)
Clearly, the Jabra Elite 85h bring a lot of impressive numbers on paper, but let’s take a look at how these translate into the real world.Design and Build
If you buy these headphones, Jabra knows enough to send them packed with a carrying case, because with headphones this size (and at this price) you’ll want to keep them in a case when you’re not actively using them. Not that these headphones are flimsy or weak; if anything, the Elite 85h are pretty well built, and feel sturdy and premium to the touch — as they should.
The design is pretty straightforward, and Jabra has clearly not taken too much of a risk here, which is perfectly fine by me. These headphones look impressive and attractive, without looking overdone and flashy. The back of the earcups are covered with a mesh-fabric material, while the earcups themselves are made out of a leatherette material that’s soft to the touch, and really comfortable to use. There’s a blend of high quality plastic, ABS, PC and other materials that keep the weight low, while giving off a premium look and feel.
The Elite 85h also come with an interesting UX choice — folding the earcups to disconnect and opening them back up to connect. That’s very similar to what you’ll see in some magnetic Bluetooth earphones, such as the OnePlus Bullets Wireless earphones, and it’s really neat seeing this on a pair of headphones. To be honest, I wasn’t completely sold on this implementation, but I used it on my weekend trip to Nainital, all through the train and the cab journey, and I found myself loving the ease of use this brings. It’s incredibly quick to respond and very reliable in its functionality to make me want this functionality on all headphones.
Comfort and Fit
The Elite 85h are also amazing when it comes to the actual comfort while wearing them. True, at 296g they’re heavier than headphones like the Sony WH-1000XM3, but even so, Jabra’s offering doesn’t feel heavy on extended usage — and I should know, I used them continuously for over 7 hours on my train + cab journey to Nainital.
The earcups have a firm grip that puts just enough pressure to hold the headphones in place, without making it feel like the headband is pressing into the top of your head — something I’ve noticed happening with a lot of headphones. Along with that, the fact that the headband also has the same leatherette material used on the earcups helps with the headphones being comfortable when being used for a long period of time.Audio Quality and Noise Cancellation
The Jabra Elite 85h come with impressive audio quality all around and while these are one of the best headphones I’ve used, they’re definitely not the best. Let me explain: the Elite 85h have impressive sound. They get quite loud if you push them, the sound doesn’t distort, and the bass is heavy enough to be thumpy, but not heavy enough to get overwhelming. Along with that, the treble is really well tuned — the elite 85h just offer a really nice blend of highs, lows, and mids.
However, if you’re listening to bass heavy songs on these headphones and you turn the volume to max, the bass sometimes does distort. I could clearly hear the bass distorting in some EDM songs that pump the bass exceedingly hard. For some reason this was even more pronounced when ANC was turned on the headphones. Turning ANC off, or reducing the volume to around 80% almost completely gets rid of this problem.
Apart from that one thing that bugs me though, the Jabra Elite 85h are the second best sounding pair of headphones I’ve tried in this price range. The first are obviously Sony’s WH-1000XM3 ANC headphones that are just so blissfully good at everything it’s almost wrong of Sony to not give others a chance.Noise Cancellation
Anyway, coming back to the Jabra Elite 85h — these headphones are a very close second to Sony’s offering, and the sound quality on the Elite 85h is really impressive. Speaking of impressive, let’s talk about the Noise Cancellation.
Active Noise Cancellation On
Active Noise Cancellation Off
The effect of turning ANC on or off is pretty obvious, but Hear-through is a cool feature that I use at work a lot. With hear-through, the Jabra Elite 85h essentially mix your music with the ambient sound they take in from the microphones, so you can hear your surroundings while you listen to your music. This is most likely aimed at people listening to music while running or jogging, but it’s incredibly useful at work, because I can keep listening to music and still discuss things with my colleagues. One thing to notice here is that if you’re listening to music at anything higher than 60-70%, hear-through is basically useless since you won’t be able to hear anything.
Anyway, with Active Noise Cancellation On, the Jabra Elite 85h perform admirably, and if I compare them to the Sony WH-1000XM3, they’re very close. With ANC on, you can completely immerse yourself in the music, movie, or podcast you’re listening to — and I did this with all three of those while I was in the train. It’s pretty great, especially in trains and flights with little kids that keep creating a ruckus — I speak from experience.
That said, I did notice one odd thing with ANC on these headphones — if you’re travelling in a car with the windows rolled down, the ANC tries to compensate for the noise the wind creates, and sometimes the headphones just end up making a very loud and annoying static sound as a result. I found this out by accident, but it’s incredibly annoying and there’s no way to fix this unless you turn off ANC, or roll the window up. It’s an issue that’s very specific to a particular situation, but it’s annoying as hell. I’m not sure if the Sony WH-1000XM3 would also have this problem, but logic suggests that they might, considering how ANC works.Connectivity
The headphones stay connected easily over 7-8 metres in a regular home-space which is pretty great, and there’s no signal drop or distortions. Also, you can connect two devices to the headphones at the same time, which can come in handy if you want to pair your phone and your laptop to your headphones at the same time to listen to music from your laptop and still be able to take calls from your phone straight on your headphones.
Connectivity wise, the Jabra Elite 85h are actually pretty great, and the only drawback I could find here is the missing aptX support, which, honestly, is something you would expect in high-end headphones like these.Buttons and Ports
The AUX-in port, well, that’s a life saver if you ever run out of battery and want to listen to music. Simply connect the headphones in wired mode and keep listening. True, ANC won’t work, and neither will hear-through, but at least you can listen to music on these even if you manage to completely drain the battery (which is a task, believe me, but more on that in the battery section).
There are also a bunch of buttons here — there are the usual play/pause, and volume control buttons on the right earcup under the mesh-fabric material, that also serve the dual purpose of putting the headphones in pairing mode, and skipping tracks with long presses.
There’s also the Assistant button on here which you can use to activate the smart assistant on your phone, so you can send messages and stuff without having to take the headphones off.
Lastly, there’s this button without any markings on it — it basically switches between the various noise canceling settings:
Jabra Sound+ App
The Jabra Sound+ app is your one stop solution for managing and customising the Elite 85h. This app is where you’ll find settings like choosing Moments for your headphones. Moments can be thought of as customisable sound profiles. There are four:
with each of these Moments you can choose between ANC on/off or HearThrough mode, you can adjust the Music equalizer, and you can choose a Music preset.
For example, I’ve set Commute to have ANC on, In Public to HearThrough, and In Private to ANC off. This way, I don’t have to listen to random kids on my commute, but I can still listen to my coworkers when I’m at work, and when I’m alone, I can save battery by turning ANC off.
With SmartSound enabled, your headphones analyse the sound in your surroundings and automatically choose Moments based on that. So they will switch automatically from Commute to In Public when you reach work, and from In Public to In Private when I’m back home. It’s pretty impressive, even though it does take some time to analyse ambient sounds and change Moments.
Other than that, the Sound+ app brings the Discover tab which is where you will find tips, tricks, news, and even firmware updates for your headphones.Battery
The Jabra Elite 85h come with a battery that’s rated to last up to 41 hours with Active Noise Cancellation off, and up to 36 hours with ANC on, and that claim is pretty accurate. From a full 100% charge, these headphones have been used for almost 16-17 hours so far with ANC turned on all the time, and they’re at 60%. Clearly, they’ll last around 34-35 hours. That’s pretty damn impressive.
Plus, thanks to USB-C charging, I don’t have to worry about carrying a separate cable for the headphones either because my phone, my laptop, and now these headphones, all can be charged from the same USB-C cable. Charging the battery also doesn’t take too long; the headphones charge in around 2 to 3 hours, and, while I didn’t test this particular thing out, Jabra claims that a 15 minute charge can get them up to 5 hours of listening time, which is also pretty impressive.Pros and Cons
So, the Jabra Elite 85h are a pair of really impressive headphones, but they too have some drawbacks and flaws. So here’s a handy list of the good, and the bad about the Elite 85h:
Good sound quality
Excellent battery life
Premium and sturdy build
No aptX support
Bass sometimes distorts at high volumes
ANC is not at par with competitors like Sony’s WH-1000XM3Jabra Elite 85h: Should You Buy These?
Buy the Jabra Elite 85h (Rs. 28,999)
HP’s turnaround is actually going far better than I thought it would and far better than it appears. This first is because I had doubts, given how complex HP is and the series of failed CEOs, that the firm could be turned around. And the second is because HP has been very light on corporate marketing and messaging when compared to Lois Gerstner’s benchmark effort at IBM.
The IBM turnaround is very familiar to me both because I was there for the critical years and because I was one of the folks chronicling the effort. In addition, the IBM turnaround, while far from perfect, sets a benchmark for how a company like HP successfully goes through the effort. HP could beat that benchmark.
Let’s talk about the state of HP’s turnaround this week.
Printing and PCs
This was perhaps the most interesting part of the turnaround effort. One of the things that folks credited to Carly Fiorina, the first external CEO HP hired, was that she tried to get the head of the Printer unit to take over the PC unit.
This failed for two reasons. One was there was very little product synergy between the two groups, particularly at the high end where industrial printers sold to print service providers. The second reason was that Vyomesh “VJ” Joshi, the head of HP’s Printer unit at the time of the first attempt to combine the units, had no interest in PCs whatsoever. And so either he would need to be replaced or the combined division separated. And this was the path Mark Hurd took after he replaced Carly Fiorina. He broke the units apart again.
So Whitman’s effort to combine them, from the outside, looked very foolish but it actually was damned smart. By the time she took over, the PC division was still in trouble and the Printer division had started to underperform as well. In addition, her most vocal internal rival was Todd Bradley, who had been working tirelessly to convince the media that he was the best choice to be HP’s CEO.
Clearly Bradley had acquired too much power for Whitman to just fire him so instead she combined the Printer and PC division, had VJ retire, and put the combined unit under Bradley. The extra effort would occupy his time and keep him from sniping at Whitman. And were he successful the success would reflect well on Whitman, and if he wasn’t, it would showcase he wasn’t ready to be CEO (if he couldn’t run a large part of the company, he clearly couldn’t run the company). As it turned out, this shuffling led her to remove him.
Bradley was replaced by Dion Weisler, who had a much stronger pedigree, having come from successful runs at Lenovo and Acer, and didn’t appear to be chasing Whitman’s job. Weisler is also an expert on the Asian market, which is where most growth for this unit is likely to come near term. In short, Whitman took three liabilities and turned them into one, and put a guy in charge that was better trained to deal with the one liability that was left.
Perhaps the most controversial change in the company was the replacement of Dave Donatelli with Bill Veghte. What made this fascinating was that Dave, from outside, looked to be much better suited for the job, having come from EMC, than Bill Veghte who came from Microsoft and was connected to Windows Vista.
This shows you the danger of outside perceptions. Because Bill had little to do with the Vista disaster as he had no line authority and was in a Marketing role (marketing has very little authority at Microsoft). Before Vista, Veghte actually had a strong career at Microsoft, with projects like Internet Explorer and Windows Server, both of which were extremely successful and required collaboration to fix.
Dave was simply the wrong executive for the job in convergence that needed to be done and Bill’s skill set was closer. So while we all focused on the hardware vs. software disconnect, it was actually a management style problem that Whitman was trying to correct. And she got a bonus. Because in convergence solutions, software plays a bigger role anyway, making Veghte more ideal in the role.
I can count on one hand how many CEOs have realized that HR plays one of the most important roles in a turn around – and I’d still have nearly 4 fingers remaining.
One of the unique aspects of HP is that they have the most capable and powerful HR manager in the segment. At HP, HR has been very well staffed. While it was Whitman’s predecessor that recognized and executed in this area, Whitman wisely left Tracey Keogh in place and she has worked tirelessly to undo the mistakes made by Whitman’s predecessors, particularly Mark Hurd. If you can’t get the employees behind you, you’ll likely fail in a turnaround effort.
While it is a long road back, Hurd did some things during his tenure that hurt morale. Had Keogh not been able, or had someone less capable been put in her role, HP likely would have failed by now, and this would be a very different column. Part of what makes a good turn-around CEO isn’t just making changes but not breaking something that is working.
HP’s Big Gambles
Less known is HP’s effort to replicate what IBM did to make DOS and Windows household names by uplifting Microsoft but with Google and their Chrome OS. Because HP is very strong in thin clients, and Blade PCs (and IBM has exited the client space) HP is uniquely suited to make this happen. And they quietly recruited Mike Nash, who was instrumental in making Windows NT/Server successful in the 1990’s at Microsoft, for the effort. As a result they have the only Chrome OS version that is truly business ready, largely because it has HP’s backing and is driven by a Microsoft legend.
Almost unknown is HP’s 3D printer effort. 3D printing is starting out at the low end, much like PCs initially did with Apple, and they are believed to be the next huge trend. This is what makes printing very strategic to HP and why combining PCs and printing makes sense. Because 3D printers, as they evolve, will likely bundle well with high performance PCs and workstations. No company in HP’s class is even close to having a solution here and HP would be able to move easily from consumer level products to industrial solutions. This play could be HP’s iPod and so much more.
Wrapping Up: Marketing
What I find interesting when comparing HP to IBM’s turnaround effort is that while most would have thought that given Meg Whitman’s political career, HP would be better at marketing Whitman’s vision. It would have created an image, like IBM did, that was well ahead of progress.
Politicians are often known to be long on promises and short on getting them done. Whitman is actually long at getting things done and short on promises. This likely both explains why she didn’t win the election in California and why the US political system is in such a mess. Maybe we need a few more folks that are better at execution than they are at marketing. Still, HP isn’t really getting credit for what they have accomplished and perhaps the recent changes Whitman has made to corporate marketing with fix that.
In the end, what I think is fascinating is that HP looks far better from the inside than the outside. And, if memory serves, that is the way the founders kind of liked it. Go figure.
In a world filled with cheap but underpowered inkjet multifunction printers (MFPs), using the HP Officejet Pro 8600 Plus is a pleasant departure. One of the most competent MFPs for the price ($300 as of 12/05/2011), it lacks nothing in its features, is solidly constructed, fully supports legal-size paper, is faster than everything else in its price range, and even offers dirt-cheap ink. There’s not much more you could ask for.
When it comes to paper handing, the Officejet Pro 8600 Plus can do everything. It automatically duplexes printouts, and copies two-sided-to-two-sided as well. Legal-size paper is fully supported throughout the printer (as it is with all OfficeJet Pro models), including the scanner and the 50-sheet ADF. The 250-sheet paper tray is adequate for most small businesses and workgroups, as is the approximately 50-sheet output tray. If you need more tray capacity, you can step up to the HP Officejet Pro 8600 Premium e-All-in-One Printer, which has an additional 250-sheet input tray–for another $100.
Setting up the Officejet Pro 8600 Plus is a breeze with any of the three supported interfaces: USB, ethernet, and Wi-Fi. The 4.3-inch LCD is great: It’s easy to enter passwords for wireless setups; the menus and settings are well-organized; and you get access to HP’s numerous Web apps. For printing from smartphones and tablets, you get HP’s print-by-mail ePrint service, as well as direct printing from iOS and Android devices via HP applets. The contextually lit navigational controls (they remain dark until needed) that flank the LCD are less thrilling, as they require an unintuitive, annoyingly long touch before responding.
The OfficeJet Pro 8600 Plus is one of the fastest inkjet MFPs we’ve tested, with speeds that range from 13.2 pages per minute (ppm) for text and mixed text with monochrome graphics, to 4.6 ppm for half-page photos on plain paper, and 2 ppm for half-page photos on glossy paper. For our most challenging print test, a high-resolution, full-page photo printed on glossy paper, the OfficeJet Pro 8600 Plus managed a just-above-average rate of 0.56 ppm. Scans are quite quick as well.
The Officejet Pro 8600 Plus’s print quality for office basics is quite good: Text is crisp and dark, and simple graphics look quite good. On the other hand, photos look a bit yellowish and washed out on plain paper, though they are much better on HP’s own photo paper. Copies, both monochrome and color, are good, although color scans lean toward the dark side.
Ink costs for the Officejet Pro 8600 Plus are outstandingly low: The standard 1000-page black cartridge costs $27, or 2.7 cents per page (cpp), while the three standard color cartridges last for 700 pages at $20 each, or 2.9 cpp per color. That makes a four-color page approximately 11.4 cpp. The news gets better: The 2300-page, $37 XL black cartridge works out to only 1.6 cpp, and the 1500-page, $28 XL color cartridges come out to 1.9 cpp–making for a four-color page that costs a mere 7.3 cpp. If you do a lot of printing, this machine’s inks will save you money in the long run.
The Officejet Pro 8600 Plus is merely one of best inkjet MFPs on the market. You might argue about the default plain paper photo output, but it’s very fast, produces good printing overall, and is very cheap to operate. If you don’t need this model’s comprehensive legal-size support, the Epson WorkForce 840 costs the same and has more paper capacity. On the other hand, it’s also a little slower, and its inks are not quite as inexpensive.
Buying a new GPU used to be a simple affair. Pick a GPU of the desired performance tier and buy one rung below it. As an enthusiast, you could always overclock it to perform as well as the GPU in the next upgrade tier. Unfortunately, things are a lot more complicated for that to work these days.
Both Nvidia and AMD have densely packed product stacks, with GPUs separated by as little as $30 increments. Let’s just say that Nvidia didn’t rack up a revenue of $12 billion in 2023 by letting overclockers undercut its bottom line. There’s a method to Nvidia’s apparent madness.Leveraging GPU Boost with Liquid Cooling
Enter Nvidia GPU Boost. On the surface it delivers the benefits of automatic overclocking to the masses. It also conveniently hobbles overclockers by severely limiting control over important overclocking parameters such as voltage and power draw. That makes the maximum achievable clockspeed with Pascal (GTX 10xx series) and Turing (RTX 20xx series) GPUs largely dependent on the available thermal headroom.
However, if you own a last generation Nvidia Pascal card, there’s a cheaper alternative to upgrading performance without having to buy a new Turing GPU. The idea is to drastically improve GPU cooling to leverage the propensity of Nvidia GPU Boost to allow for higher sustained clock speeds when thermal headroom is available. This can be achieved by adding a low-cost AIO liquid cooler onto the GPU.How Does a 20-Percent Faster GPU Sound?
Instead of losing money upgrading to a new Turing GPU, I added Corsair’s H80i v2 AIO liquid cooler onto my year old Nvidia GTX 1070 Ti Founders Edition GPU with the help of the NZXT Kraken G12 mounting kit. To find out if this works, I put the stock, overclocked, liquid-cooled versions of the same GPU through the paces using the 3D mark Time Spy graphics benchmark. The results were astonishing.
Even after overclocking the GPU to the hilt, I could only manage to get 5.7 percent improvement in performance with the stock cooling setup. This is because Nvidia’s GPU Boost prevents the GPU from achieving the full OC potential owing to strict thermal restrictions. However, the AIO liquid cooler mod netted a massive 20 percent performance improvement compared to the stock GPU. In fact, the modded GPU’s 3D Mark Time Spy GPU score of 7900 points put it a class above the newer Nvidia RTX 2060 with its relatively measly Time Spy score of 7600 points.
It’s safe to say there’s a genuine incentive in implementing this mod. This is especially true when you can achieve better than RTX 2060 performance at a fraction of the upgrade cost.What You Need: Bare Essentials
Before we can get started, here’s a list of everything you’ll need to successfully cool your GPU with an aftermarket AIO liquid cooler. Do note that this guide expects some degree of competence and familiarity with PC assembly and disassembly from the user. If you are not comfortable taking a screwdriver to your GPU, this mod isn’t for you.
You can choose an AIO liquid cooler of any make, model, or size as long as it is listed in the compatibility list for the NZXT Kraken G12 mounting kit. In fact, AIO coolers from brands and models not in the official compatibility list also work, provided they use the same Asetek mounting system found in the NZXT Kraken X-series of AIO coolers. The Corsair H80i v2 liquid cooler used in this guide isn’t officially supported, but it works absolutely fine.
Depending on the make and model of your AIO cooler, you may or may not have to buy thermal compound separately. You can purchase the Philips head screwdriver tips in PH1 and PH00 sizes along with the 4mm hex socket driver separately. These are also available along with other useful drive bits in the iFixit Mako precision screwdriver set.The Optional Extras
These parts are strictly optional. If you are on a tight budget, you can safely skip these components without worry. These optional extras are only required for improving the aesthetics and further stretching the overclocking potential of the GPU. The M2.5 hex nuts will come in handy for retaining the GPU backplate. The GPU fan adapter and Y-splitter cable are indispensable if you want the AIO cooler’s radiator as well as VRM fans to be controlled by the GPU itself. Otherwise, you can save money by connecting these fans to the motherboard fan headers.
The VRAM, MOSFET, and PWM controller heatsinks will help you push overclocks much higher. Mounting these tiny heatsinks onto the VRM (or power delivery) components can be achieved with 3M’s 8810 thermal adhesive tape. There’s always a risk of these electrically conductive heatsinks falling off the GPU and into the case with the 3M thermal adhesive tape. This is especially true if you choose heavier copper heatsinks, which are far more effective than lighter aluminium ones.
In that case, it is recommended to permanently fix the heatsinks onto the components with a thermal epoxy such as Arctic Silver. Mind you, once you epoxy heatsinks onto your graphics card, you can kiss your warranty goodbye since they aren’t going to come off. Ever.
Now that we have that out of the way, we can move onto the actual modding process.
Note: Make sure you’re using an anti-static wrist strap that is grounded to a large enough conductive material such as the PC case. Avoid standing on a rug and work barefoot, if possible, to prevent build-up of static electricity.The Steps
1. Use the PH00 screwdriver bit to remove every single screw securing the backplate. Take off the backplate and keep it safe along with the screws. You’ll need these later.
2. Switch over to the PH1 screwdriver bit to remove the larger screws holding the stock heatsink onto the GPU. Don’t forget to remove two screws securing the heatsink to the rear I/O shield marked by the arrows.
3. You’ll need the 4mm hex socket driver to unscrew the standoffs, which serve as backplate mounting points as well as screws that hold the heatsink onto the PCB.
4. Carefully separate the stock heatsink from the PCB. Don’t yank the whole thing off just yet, or you’ll risk damaging the GPU fan and logo LED cables. Gently pry both cables off and separate the heatsink from the PCB.
5. Skip to the next step if you don’t intend to add aftermarket heatsinks to the VRM modules and instead prefer to rely on the VRM cooling fan provided with the Kraken G12 mounting kit.
Attaching the VRM heatsinks using the 3M 8810 thermal adhesive is a simple matter of cutting the adhesive to size, placing it onto the modules, and pressing the heatsinks firmly in place. Make sure you clean every surface (heatsink and VRM modules) with isopropyl alcohol and wait a few minutes to let it evaporate.
Using a more permanent method such as Arctic Silver thermal epoxy is a bit more complicated. Both epoxy compounds must be mixed thoroughly in small batches and applied quickly. This epoxy hardens fairly fast, so break the entire heatsink application process into smaller batches. Apply a small drop of epoxy, taking care that it doesn’t overflow onto the PCB and short components.
6. You can skip this step if you don’t want to bother reinstalling the GPU backplate. Retrieve the backplate mounting standoffs from Step 3. Insert them from the rear of the PCB, and secure them from the front using M2.5 hex nuts. You can now reattach the backplate onto the PCB.
7. Screw in the NZXT Kraken G12 mounting brackets onto the PCB using the provided spring-loaded screws as shown in the photograph.
Now would be a good time to clean the old thermal paste off with isopropyl alcohol and lint-free wipes or a microfibre cloth. Apply a small rice grain-sized drop of thermal paste if your AIO liquid cooler doesn’t have thermal paste pre-applied to the GPU block.
8. Twist the AIO liquid cooler GPU block into the correct position on the Kraken G12 mounting bracket. Depending on the brand and model of your AIO cooler, you might have to remove a few mounting brackets off its GPU block. Referring to the AIO cooler and NZXT Kraken G12 manuals should give you an idea. The Kraken G12 will have already come equipped with a 92mm VRM cooling fan.
9. Now would be a good time to attach the 4-pin PWM fan adapter for GPU. Split this fan header into two using Y-splitter PWM fan cable. This should allow the GPU to control the speed for both radiator as well as VRM cooling fans.
10. Align the four mounting holes around the AIO cooler’s GPU block on the Kraken G12 mounting bracket with the corresponding holes on the mounting bracket we installed onto the PCB in step 7. Place the entire assembly down on the GPU. The AIO liquid cooler’s GPU block will have made contact with the GPU die if you did this right.
Secure the assembly using four spring-loaded thumb screws around the GPU block. Do not tighten the thumb screws just yet. Only take up the slack for now. Moving diagonally from one screw to the next, gently tighten each screw with just your fingers; taking care not to apply an unequal amount of torque across the four screws. Keep tightening with your fingers the diagonally opposite screws until you can’t anymore. Use a screwdriver to further tighten the screws while taking the same diagonally opposite path.
Connect the 92mm VRM cooling fan to one of the fan headers on the Y-splitter PWM fan cable we installed in Step 9. Now would be a good time to use some cable ties to manage the cables in a more streamlined fashion. It also pays to doublecheck all fan connections while you still can at this stage.
11. Install the GPU into the designated PCI-E x16 slot on your motherboard, followed by installing the AIO cooler’s radiator and fan onto the PC chassis. Don’t forget to connect the radiator fan to the last remaining fan header on the Y-splitter PWM fan cable. Alternatively, you can connect the radiator and VRM fan to motherboard fan headers if you opted out of the GPU fan adapter route. Connect the GPU power cable, and you’re done.Unlocking the True Potential of Your GPU
I was able to unlock a whopping 20 percent extra performance over the stock version of my Nvidia GTX 1070 Ti with the Kraken G12 AIO liquid cooling mod. What’s more impressive is how this is still 13.5 percent faster compared to the maximum achievable overclock without this mod.
The GPU temperature doesn’t exceed 50°C even after several hours of gaming. That is precisely why my GPU boost clocks stayed well over 200MHz higher compared to the stock GPU and 180MHz higher compared to the overclock achievable without this mod. This can easily match (or even exceed in my case) the 10 to 15 percent performance improvement promised by upgrading to the new Turing GPUs. This isn’t bad at all for a mod that costs less than $100.
Growing up, Nachiket had a penchant for disassembling household electronics and appliances; most of which couldn’t be reassembled successfully. His parents didn’t approve. These days, he leverages his lifelong pursuit of dissecting gadgets to write about technology. His parents still don’t approve.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Update the detailed information about Desktop Dan Aio Seri Hp Elite on the Katfastfood.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!