Trending December 2023 # Cannot Create A New Folder In Windows 11/10 # Suggested January 2024 # Top 20 Popular

You are reading the article Cannot Create A New Folder In Windows 11/10 updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Cannot Create A New Folder In Windows 11/10

Cannot create new folders in Windows 11/10

Use keyboard shortcut

Check Folder permissions

Reset Folder View in Explorer

New context menu missing?

Create New folder missing from Context Menu

Troubleshoot in Clean Boot State

Run System File Checker

Run System Restore.

Let us see them in detail.

This problem has 2 conditions. One is the inability to create folders on the Desktop and the other situation is when you are unable to create folders inside existing folders. Try the following solutions sequentially to resolve the issue:

1] Use the keyboard shortcut

The keyboard shortcut to create a new folder is CTRL+SHIFT+N. You could try it to create a new folder. If it works, you would save a lot of time with more complicated solutions. Though it will still be a workaround and not a fix.

2] Check Folder permissions

While users have permissions to create new folders by default, the Folder permissions could get altered by a virus, malware, Windows Update, etc. In such a case, you can check for folder permissions and correct them as follows:

Go to the Security tab and select the user which is logged on to the system.

In the section for Permissions, under Allow, check the boxes for Full control and Write.

Check if it resolves the problem.

Lack of permissions is the main cause of the issue in discussion. Adding them should resolve the problem in most of the cases.

If adding the permissions doesn’t help, or if you are facing this problem on the Desktop too, try the following solutions sequentially:

3] Reset Folder View in Explorer

By default, the File Explorer is set to permit users to create sub-folders. If the settings changed due to any reason (like a virus, malware, Windows update, etc), you can reset the Folder View back to default, either through the File Explorer or the Registry Editor.

4] New context menu missing? 5] Create New folder missing from Context Menu


Now on the right side, ensure that the value of Default is set to Folder.

Thanks for this tip, Bubble Widgets.

6] Troubleshoot in Clean Boot state

In case any third-party program is preventing the creation of a new folder, the cause could be isolated by restarting the system in Clean Boot State. In this state, the system will boot, but no third-party program will launch automatically at startup. Thus, you would be able to find out whether a third-party program is causing the issue or not.

If not, you can check through the default startup programs and disable the troublesome one.

7] Run System File Checker

The issue in discussion is unexpected, yet a common problem. One of the reasons behind such an issue could be corrupt or missing system files. A SFC scan could help check for corrupt or missing files and replace them if necessary.

8] Run System Restore

If everything else fails, you could try to restore the system to an earlier System Restore point when you know if it was working well. It is quite possible that recent changes to the system could have caused the issue and a System Restore could fix this problem. It should be noted that a System Restore works only if you created a restore point earlier. Thus, we suggest creating restore points from time to time.

Hope it helps!

You're reading Cannot Create A New Folder In Windows 11/10

Fix: Startup Folder Not Working In Windows 10/11

FIX: Startup folder not working in Windows 10/11






To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

The most common problem with startup programs is that they tend to bloat your system and slow down the startup process.

The dozens of programs in combination with an old HDD mean that you’ll wait for some time until the PC finally boots.

However, there’s also the opposite of it – when programs in Windows Startup folder just won’t start no matter what you do.

For the sake of dealing with this annoyance, we prepared an in-depth list that should provide you with enough resources to address this problem.

In case you’re trying to make a program start with the system without success, make sure to take a look below.

What can I do when programs from Startup folder won’t start? 1: Check the Startup manager

Back in the days, you had to turn to System Configuration in order to tweak the startup programs. There were all Windows services, too, so there are a lot of things you couldn’t touch.

A tad overcomplicated for a standard user. Others turned to third-party tools that were more of a bloatware than the solution. Luckily, that’s not the case with Windows 10.

Now, you can navigate to good old Task Manager and find all startup programs you need.

You can enable or disable any of them based on your needs.

If you’re not sure how to use newly added Startup manager in Windows 10, follow the instructions below:

Press Ctrl + Shift + Esc to open Task Manager.

Open the Startup tab.

Select the programs you want to start with the system and enable them.

Confirm changes and restart your PC.

2: Reinstall the program

After every installation, the program or application should automatically create a shortcut in the system’s startup folder.

However, sometimes and for no apparent reason, the installation sequence simply skips on doing so.

Even though the way of manipulating startup programs changed, the containing folder is still there with Windows 10. And it still needs those shortcuts to run as intended.

You might also be interested in our guide on how to reinstall Windows Store apps in Windows 10

What you should do in this scenario is to try to repair the installation or reinstall the program.

Most programs offer the Repair option, but even the reinstallation shouldn’t take too much of your time, with only the largest ones being an exception.

In the Windows Search bar, type Control and open Control Panel.

In the Category View, open Uninstall a program.

Navigate to Program files or Program files (86) and delete the remainings in folders.

Also, you can use a third-party cleaner like CCleaner to delete the remaining traces stored in the registry.

Run the installer and install the program again.

3: Run DISM

Most of the steps we provided in this article relate to third-party programs. However, if some of the Windows-native applications won’t run at the startup, there’s an alternative way to address this.

We’re referring to DISM or Deployment Image Servicing and Management tool.

This tool can come in handy for various system-related issues, and since you’re unable to reinstall the, let’s say Task Manager, you can at least restart it with the little help of DISM.

If you’re not confident running this tool, we made sure to present you two ways it can be used in Windows 10. Follow the instructions below:

In the command line, type the following line and press Enter:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

Wait for the procedure to finish (it might take up to 10 minutes) and restart your PC.

And here’s the alternative way to run DISM:

Mount your Windows 10 installation media, either USB or ISO DVD.

Open Command Prompt (already explained how to above).

In the command line, type the following commands and press Enter after each:

DISM /online /Cleanup-Image /CheckHealth

If there’s not any single error, enter this command and press Enter:

DISM /online /Cleanup-Image / ScanHealth

If DISM finds any errors, enter the following commands and tap Enter:

DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSourceinstall.wim

Have in mind that you’ll need to replace the ”repair source” part with your installation media.

Wait for the procedure to end and restart your PC.

Although this is should help you with the majority of issues, it may not be the final solution for your issue. If that’s the case, make sure to continue with the steps we provided below.

4: Insert the shortcut manually

Now, the fact that you can’t locate the Startup folder in the Start menu like before, doesn’t mean that you can’t find it at all. It’s still there in Windows 10, hidden from the prying eyes.

Expert tip:

However, since that’s not always the case, you’ll need to take the matters into your own hands and create the shortcut on your own.

This shouldn’t be too much of a problem if you follow these instructions closely:

Navigate to the installation folder of the troublesome program.

Press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:


Copy the shortcut and paste it into the Startup folder.

Restart your PC and look for changes.

5: Create a batch file

Another possible solution also requires a manual approach. Namely, you can create a batch file and force a program to start with the system.

You’ll still be prompted with UAC message informing you about the program at every startup, nonetheless. But, đ at least you’ll be able to make it work.

Here’s how to create and run the batch file that enables you to run any program at the startup:

In the document, paste the following lines but don’t forget to change the example with the path to the program’s exe file.

@echo off

C:Program FilesDAEMON Tools LiteDTLauncher.exe


After the system starts next time, the program should start. Although, you’ll be prompted with UAC message.

6: Force the elevated program with Task Scheduler

The Task Scheduler is a built-in tool that enables you to create, schedule and run various tasks with the implementation of triggers and criteria you set.

This, obviously, means that you can set an EXE file to run with the system startup, setting At Startup as criteria or trigger.

If you never had a chance to use Task Scheduler to force a program to start with the system, make sure to follow these steps and we should be good to go:

In the Windows Search bar, type taskschd and open Task Scheduler.

Under the General tab, name the Task same as the program you’ll try to run. In this case, we’ve chosen DeamonTools for a showcase.

Check the Run with highest privileges box.

Select Windows 10 from the ”Configure for” drop-down menu and open the Actions tab.

From the Action drop-down menu, select Start a program.

In the Program/script field, paste the following command:


In the ”Add arguments (optional)” section, add the Task name and the path to the program’s EXE file (installation folder) in this manner:

/c start Task Name Full Path of Program

Don’t forget to replace the Task name and Full path to program’s EXE file above.

Now, finally press OK to confirm changes and you should be able to see the newly-created task.

Now press Windows + R to open the elevated Run command line.

In the command line type to open the Startup folder:


Copy the program’s shortcut and paste it into the Startup folder.

schtasks /run /tn “Task Name”

Don’t forget to change the task name with the name of your actual task we just created. In our case, DeamonTools.

On the next screen, name the shortcut as the program is named. In our case DeamonTools Lite.

7: Disable UAC

User Account Control or UAC is one of those security measures that are certainly helpful to some extent but can become bothersome over time.

Especially if a certain program requires administrative permissions in order to run. By default, UAC will block these kinds of programs on startup, so the only thing that comes to our mind is to disable it completely.

I’ve always turned it Off on Windows 7 for various reasons, but it seems that the drawbacks are higher when it comes to Windows 10.

If you’re not sure how to disable User Account Control in Windows 10, follow the instructions below:

Type UAC in the Search bar and open Change User Account Control settings.

Move the slider to the bottom and confirm changes.

This should stop further prompts and enable you to start some of the troubled programs.

8: Edit registry

Mostly everything that you do within the Windows interface can be taken to a higher authority, which is Registry.

As you probably know, Windows Registry keeps all low-level settings of both system and third-party processes that appear in everyday use.

That makes it quite dangerous, so make sure not to meddle with registry inputs if you’re not 100% sure what you’re doing.

Nonetheless, with a careful approach, you should be able to easily force certain programs into starting with the system from the Registry Editor.

Make sure to follow the steps below closely and we should be good to go:

In the Windows Search bar, type regedit, and open Registry editor.

Open the File option and create a backup of your current registry state.

Follow this path:


Name value exactly as the program you want to run is named.

In the Value data field, paste the exact path of the program’s EXE file (including the exe file, like all the above-enlisted programs).

Save changes and restart your PC.

9: Reset this PC

Finally, if you’ve reached the brink of your nerves and the system just won’t comply, the only remaining solutions we can offer is to start from a scratch.

We won’t go as far as to recommend a clean reinstallation, and luckily, with Windows 10 you don’t need it. What you can do is to check for the recovery options and use Reset this PC.

Restoring the system to its default values should be the final resort, but also it can help.

In addition, you get to keep your files without losing any important data in the process. If you’re up for the task, follow the instructions below:

Press Windows key +I to open Settings.

Open Update & security.

Select Recovery from the left pane.

Was this page helpful?


Start a conversation

Where Is The Startup Folder In Windows 11/10 For All Users

The Startup folder contains a list of application shortcuts that run automatically every time you start up your computer. You can add programs by adding their shortcuts to the folder to make them run during your Windows 11 or Windows 10 startup. You can also remove any of them if you don’t want them to run during startup.

Location of Startup Folder for All users

Here’s how to go to the all-users’ startup folder in Windows 10 or Windows 11:

Open File Explorer from the start menu.

Browse to the following directory. C:ProgramDataMicrosoftWindowsStart MenuProgramsStartUp

Please take note that the above directory is assuming your default Windows was installed in C: drive. If your Windows is in another drive, change the drive letter.

Add or remove any program’s shortcut into or from the folder.

Another much faster way to go to the startup folder in Windows 11/10:

Go to start menu and type Run. Hit enter.

In the Open field, type shell:common startup and then hit enter.

Startup Folder for Current User Only

If you would like to configure startup for only the currently logged-in user, here’s where you should go:

Open File Explorer.

Browse to the following folder. C:UsersUsernameAppDataRoamingMicrosoftWindowsStart MenuProgramsStartup

Replace the Username with the actual username you’re currently using in your Windows system.

Add or remove any shortcut as you want.

Another quicker method to go to this folder:

Go to start menu and type Run. Press enter.

Type shell:startup in the open field and press enter.

Configure Windows 11/10 Startup Apps from Msconfig

Not all application EXE shortcuts would be shown in the startup folder mentioned above. Some would not be there but would still run during startup. To have a clearer view of all the background programs and services that would run during the startup of your Windows 10 computer, use Msconfig. Here’s how:

Go to Start, then Run.

Type msconfig and hit enter.

In the System Configuration window, go to the Startup tab.

Programs shown in the startup list are all the programs that would run during startup.

Additional Tips for Optimizing Startup Programs

While the methods above are effective for managing startup programs in Windows 10/11, there are also other ways to further optimize your startup and improve your system’s performance. Here are a few additional tips:

Disable unnecessary startup programs: Take a closer look at the programs that are set to run at startup and disable any that you don’t need. Some programs, such as antivirus software or cloud storage services, are important to have running at startup. However, others may not be necessary and can be disabled to free up resources and speed up your system’s boot time.

Clean up your system: Regularly cleaning up your system can help improve startup times and overall system performance. Use a disk cleanup tool to delete unnecessary files, clear out temporary files, and remove unused programs. This can help free up resources and reduce the number of programs that need to run at startup.

Upgrade your hardware: If you’re still experiencing slow startup times even after optimizing your startup programs and cleaning up your system, it may be time to upgrade your hardware. Adding more RAM or switching to a faster hard drive or solid-state drive can significantly improve your system’s performance and reduce startup times.

By following these tips and using the methods outlined above, you can effectively manage your startup programs in Windows 10/11 and optimize your system for better performance.

How To Rename Or Delete Software Distribution Folder In Windows 11/10

The SoftwareDistribution folder in Windows operating system is a folder located in the Windows directory and used to temporarily store files that may be required to install Windows Update on your computer. It is thus required by Windows Update and maintained by WUAgent.

SoftwareDistribution folder location

The Software Distribution folder in Windows 11/10/8/7 is situated in the following location in File Explorer:


On my computer is size is around 1 MB, but its size could vary.

Is it safe to delete SoftwareDistribution folder

While you do not want to touch this folder under normal conditions, you may need to empty its contents should you find that your system’s Datastore and the Download folder have got de-synchronized, resulting in your Windows Updates not working properly.

It is generally speaking safe to delete the contents of the Software Distribution folder, once all files required by it have been used for installing Windows Update. Even if you delete files otherwise, they will get automatically downloaded. If you were to delete the folder itself, it will get automatically re-created and the required WU components downloaded automatically.

However, this data store also contains your Windows Update History files. If you delete them you will lose your Update history. Moreover, the next time you run Windows Update, it will result in a longer detection time.

If your Windows Update is not working properly or not working at all or if you find that the size of this folder has really grown large, then you can consider deleting the Software Distribution folder in Windows 11/10/8/7.

If it is just the size, then if you use Disk Cleanup Tool and opt to Clean up System Files on your System Drive, and then Windows Update components & Delivery Optimization files , you will find that the size of this folder will get substantially reduced. But if you are facing Windows Update issues, then you flushing this folder has been known to help fix several issues like Windows Update not working, Windows Updates fail to install, Failure configuring Windows updates, Windows Update stuck downloading updates, We couldn’t complete the updates, Windows 10 keeps installing the same update and so on.

Delete Software Distribution folder

To delete the contents of the Software Distribution folder, in Windows 11/10, from the WinX Menu, open Command Prompt (Admin). Type the following one after the other and hit Enter:

net stop


net stop bits

This will stop the Windows Update Service and the Background Intelligent Transfer Service.

Now browse to the C:WindowsSoftwareDistribution folder and delete all the files and folders inside.

If the files are in use, and you are unable to delete some files, restart your device. After rebooting, run the above commands again. Now you will be able to delete the files from the mentioned Software Distribution folder.

After you have emptied this folder, you may restart your computer or you may type the following commands, one at a time in the CMD, and hit Enter to restart the Windows Update related Services.

net start


net start bits

Now that folder has been flushed, it will now get populated afresh.

Rename SoftwareDistribution folder

If you wish to rename the Software Distribution folder, open an elevated command prompt windows, type the following commands one after the other, and hit Enter:

net stop wuauserv net stop bits rename c:windowsSoftwareDistribution SoftwareDistribution.bak net start wuauserv net start bits

Alternatively, you may also boot Windows into Safe Mode, and rename SoftwareDistribution to chúng tôi or SoftwareDistribution.old.

Hope you find the post useful.

Want to learn more about the following folders?

How To Create M3U Playlist Using Media Player In Windows 11/10

In this guide, we are going to talk about how to create an M3U playlist in Windows 11/10. M3U is an acronym for MP3 URL and is a multimedia playlist file. It was originally designed to create playlist files with MP3 audio files. However, it may contain audio files in other audio formats too. Additionally, you can also add video files to M3U playlists.

How to open M3U Playlist in Windows

A lot of music players let you open and listen to M3U playlists on Window 11/10. You can import, view, and play M3U playlists in Windows Media Player. Other than that, some other third-party media players also support M3U playlists to import and play. Some of these media players include VLC media player, GOM Player, Winamp, AIMP, and PotPlayer.

Do note that the M3U playlists don’t contain the actual media content. These playlists are stored in text-based format and contain only the path to media files to play them in the added order. Let us now check out different methods to create M3U playlists on Windows 11/10.

How do I make an M3U playlist in Windows Media Player?

You can use the native media player application of Windows 10 i.e., Windows Media Player. You can create a new M3U playlist as well as play existing M3U files using WMP. Here are the steps to generate playlists in M3U file format in Windows Media Player:

Open Windows Media Player.

Browse and import source media files.

Drag the media files to Playlist.

Select M3U as playlist format.

Press the Save button to generate an M3U playlist.

Firstly, launch the Windows Media Player application. Next, browse the media files and folder with which you want to create an M3U playlist file. Now, drag the media files onto the Playlist section.

If you want more options to create M3U playlists, we are going to list them in this post. Let us checkout!

How to create an M3U playlist in Windows 11/10

Here are some other methods to create an M3U playlist on your Windows 11/10 PC:

Use a dedicated playlist creator to create an M3U playlist.

Create M3U playlists in the VLC media player.

Generate M3U playlists in Winamp.

Create an M3U playlist in AIMP.

Use Audacious to create M3U playlists.

Create an M3U playlist in Notepad.

Let us discuss the above methods in detail now!

1] Use a dedicated playlist creator to create an M3U playlist

There are some dedicated programs that allow you to create M3U playlists on Windows 11/10. Here, we are going to list down two free playlist creators. Let us checkout!

1) Playlist Creator For Mp3 Players

As the name gives away, Playlist Creator For Mp3 Players is a free software to generate M3U playlists. It is portable and lightweight playlist maker software. Here are the main steps to use this software in order to generate M3U playlists:

Download this software from

Unzip the downloaded RAR file using unzipper freeware.

Launch the Playlist Creator application.

You can now change the order of files using Move Up or Move Down button.

Press the Save button to save the M3U playlist.

It is an easy-to-use and simple M3U playlist maker that you can try.

2) sPlaylistMaker

Another dedicated software to create M3U playlists on Windows 11/10 is sPlaylistMaker. It is a portable software that allows you to create M3U and M3U8 playlists. Here are the steps to create an M3U playlist using sPlaylistMaker:

Download sPlaylistMaker.

Unzip the downloaded folder.

Run the sPlaylistMaker application file.

Set up Playlist options including playlist name, write location, files to include (audio/ video or both), write type (M3U or M3U8), etc.

Drag and drop audio files or a whole folder to its interface.

The M3U playlist will be created as soon as you drop audio files onto its interface.

To use this software, you can download it from here.

See: How to merge multiple Playlists on Spotify and YouTube Music.

2] Create M3U playlists in the VLC media player

If you are an ardent user of the famous VLC media player, you can use it to create M3U playlists. It lets you generate M3U and other playlist files including M3U8, XSPF, and HTML playlists. Here are the main steps to create M3U playlists in the VLC media player:

Download and install the VLC media player.

Launch the application.

Toggle view mode to Playlist.

Add media files to the playlist.

Select M3U as the output file format and save the playlist.

Firstly, download and install the VLC media player if you don’t already have it on your PC. Then, open the GUI of this software.

After that, go to the File menu and tap on the Save Playlist to File option.

Finally, set the target format to M3U, enter the playlist filename, and then press the Save button. This will create an M3U playlist file that you can use in a supported application.

Read: How to edit Audio or Video Metadata Tags in VLC media player.

3] Generate M3U playlists in Winamp

Winamp is one of the first audio players that supported M3U playlists. You can use it to play and create M3U, M3U8, and PLS playlists in Windows 11/10. To do so, here are the steps:

Download and install Winamp.

Launch Winamp.

Add media files to it.

Select M3U as output playlist format.

Enter a filename and press the Save button.

This way you can create M3U8 and PLS playlists too.

Read: How to use Mini Lyrics Plugin for Windows Media Player.

4] Create an M3U playlist in AIMP

AIMP is a good music player that can create an M3U playlist. It is a complete audio player with audio tagging and conversion functionalities. You can create M3U, M3U, (Unicode), and Winamp playlist files using this audio player software. Let us check out the steps to do so:

Firstly, download and install AIMP on your PC.

Now, launch the AIMP software.

Then, press the Export Playlist option and save the M3U playlist file.

It is quite easy and smooth to create M3U playlists with AIMP.

5] Use Audacious to create M3U playlists

Another software that you can use to generate M3U playlists is Audacious. It is a dedicated music player that can create M3U playlists. Follow the below steps to do so:

Download Audacious and install it.

Launch the application.

Import the source audio files by going to the File menu.

Enter the playlist name with the .m3u extension.

Press the Save button to generate an M3U playlist.

Read: How to download YouTube playlist videos at once.

6] Create an M3U playlist in Notepad

Yes, you read that right! You can also create an M3U playlist in Notepad on Windows 11/10 PC. As an M3U playlist basically contains the location of media files and is a text-based file format, you can enter the path of media files in new lines and create an M3U playlist. Here are the exact steps to create an M3U playlist in Notepad:

First, open the Notepad application on Windows 11/10.

Now, copy and paste the exact path to all the media files with which you want to create a playlist.

Next, select Save as type to All Files.

Then, enter the playlist filename and manually add the .m3u file extension.

Lastly, press the Save button to create an M3U playlist.

Using Notepad is the easiest way to create an M3U playlist on Windows 11/10 PC.

How do I make an m3u playlist in notepad?

You can create M3U playlists in Notepad by using the steps mentioned in method (6). Just enter the path of media files and save the file in M3U format.

How do I turn a folder into a playlist?

The above-listed methods can be used to turn a folder into a playlist. You can import a folder of media files VLC, AIMP, or any other software mentioned here and convert it to an M3U or some other supported playlist.

That’s it!

Now read: Cannot load M3U8, Cross Domain Access Denied, 404 not found, or No levels to play

How To Rename A Printer In Windows 11/10

This post will show you how to rename a printer in Windows 11/10. By default, whenever you install a printer, Windows 11/10 automatically set its name based on printer series, model number, and manufacturer.

If you ever feel the need to change the printer name, then it can be done using built-in options available in Windows 11/10. This post covers all those options with step-by-step instructions to rename a printer including the built-in virtual printer known as Microsoft Print to PDF. You can change the name of a Printer in Windows 11/10 using Settings, Control Panel, PowerShell, or Command Prompt.

How to rename a Printer in Windows 11/10

In this post, we have shown you four ways you can change the name of the printer in Windows 11/10:

Using the Settings app

Control Panel

Windows PowerShell

Command Prompt

1] Rename a Printer using the Settings app

Here are the steps for Windows 11 users:

Press Win+I hotkey to open the Settings app

Select a printer

In the Printer Properties window, go to the General tab

Again, go to the General tab

Add printer name in the field available just next to the printer icon

That’s it! Now when you will access Printers & scanners page or the Devices and Printers section, you will see the new name of that particular printer. In the same way, you can use the above steps to change the name of other added printers.

Here are the steps for Windows 10 users.

The settings app contains a separate page for Printers & scanners. You can access that page and then proceed further to rename a printer.

To Rename a Printer using the Settings app:

Open the Settings app using Win+I shortcut key

Access the Devices menu

Select the Printers & scanners page.

On the right-hand side, you will see the list of available printers and scanners.

Select a printer of your choice and then press the Manage button.

Under Manage your device section, use the Printer properties option.

This will open the Properties window of that printer with General tab.

There you will see the name field.

Now you can enter any name you prefer and Apply and save the changes using OK button.

2] Rename Printer name using the Control Panel in Windows 11/10

To Rename a Printer using the Control Panel:

Type control panel in Windows Search box and press Enter.

Under Control Panel, change View by mode to Small icons or Large icons.

Select the Devices and Printers option.

All the installed printers will be visible to you.

The Printer Properties box will open with General tab. In the name field, enter the desired name, and save it.

Your printer’s name will be changed successfully.

3] Change the name of a Printer using PowerShell in Windows 11/10

Windows PowerShell lets you rename a printer using two simple commands.

First of all, you need to open an elevated PowerShell.

Now, get the list of installed printers using the following command:

The name of all printers will be visible to you. Copy or remember the name of the printer you want to rename.

Now, you need to run a command that will contain the new name and the old/current name of your printer, just like the second command highlighted in the image above. The command is:

Rename-printer -NewName “New Name of Printer” -Name “Current or Old Name of Printer”

This will change the name of that printer immediately.

4] Change Printer name using Command Prompt in Windows 11/10

Command Prompt also helps you rename a printer with two simple commands. In the first command, you can see the names of all available printers. And, the second command uses a VBS script to rename a printer.

In the first step, you have to run the Command Prompt as an administrator.

After that, open the list of printers using this command:

wmic printer list brief

Now you know the printer name that you want to rename. Move to the second step.

Execute the following command to rename your printer:

Cscript C:WindowsSystem32Printing_Admin_Scriptsen-USprncnfg.vbs -z “New Name of Printer” -x -p “Current Name of Printer”

Just add a new name and existing name of your printer in the command and it will rename that printer.

This is how you can rename a printer in Windows 11/10.

All the options and steps are pretty simple. Use any option you like and change the default printer name to the custom name of your choice.

How do I rename my printer?

Whether you want to rename your printer in Windows 11 or Windows 10 computer, both the Windows OS has some built-in options to rename a printer. Among those options, the Settings app option is pretty easy. And, we have also covered all the steps in this post to rename a printer using the Settings app for Windows 11/10.

If you want, you can also use other options like CMD, Control Panel, and Windows PowerShell to rename a printer. All these options are also covered above in this post.

How do I rename a printer on the print server?

Now read: How to rename a Bluetooth device.

Update the detailed information about Cannot Create A New Folder In Windows 11/10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!